• State Verified Answer
  • Replies 3 replies
  • Subscribers 67 subscribers
  • Views 1050 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 237350
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

on nrf52810 datasheet current consumption:1.5 µA at 3 V in System ON mode, with full 24 kB RAM retention, wake on RTC,But Online Power Profiler,Idle current 1.1µA.Idle current is not System ON mode current consumption?

xixili

on nrf52810 datasheet current consumption:1.5 µA at 3 V in System ON mode, with full 24 kB RAM retention, wake on
RTC,But Online Power Profiler,Idle current 1.1µA.Idle current is not System ON mode current consumption?

Parents
  • 0

    Hi

    There could be multiple reasons for this to occur, so it's impossible to say by your brief description. Are you measuring on a Development Kit or a custom board? What instrument are you using to measure the current consumption? There might be some current leakage somewhere on the board, as the OPP and PS values are measuring the chip by itself with nothing else drawing power. There could also be a pin that is shorted somewhere on your board.

    Best regards,

    Simon

Reply
  • 0

    Hi

    There could be multiple reasons for this to occur, so it's impossible to say by your brief description. Are you measuring on a Development Kit or a custom board? What instrument are you using to measure the current consumption? There might be some current leakage somewhere on the board, as the OPP and PS values are measuring the chip by itself with nothing else drawing power. There could also be a pin that is shorted somewhere on your board.

    Best regards,

    Simon

Children
No Data
Related