Communication link between nRF528xx and nRF24L01

[JIVAN]

Need to communicat between nRF52810 and nRF24L01. nRF24L01 is standard module from Nordic. we are using nRF52 development kit and using Segger Embedded Studio (as suggested by your representative) . Please let us know which library to use to get the RF communication to communicate with nRF24L01

We will have multiple 52810 modules at the data point end. One 24L01 as the common controller end. This 24L01 will talk to the 25810 modules and send command and in turn 52810 will send the required information.

Please let us know what library to use in the nRF2810 / Segger Embedded  Studio so we get the link with 24L01

Do we have to change from Segger to something else to get this functionality or will Segger have the library for the same.

[Joakim Jakobsen]

Hi. 

If you are using the nRF5 SDK to develop for the nRF52810 you can take a look at ESB. 

Enhanced ShockBurst User Guide

You won't need to change from SEGGER in order to use this. We have ESB examples in the nRF5 SDK for SES. 

Best regards, 
Joakim Jakobsen

[JIVAN]

Hi Joakim, 

Thanks for the reply. We will use the link and work further. and will ask for more if we get stuck. 

Thanks a lot for quick response

[Joakim Jakobsen]

No problem!

You are welcome to post another ticket if you have further questions.