UARTE0 BAUDRATE setting method

[yokokawa]

OS in development environment ：Windows7
HARD :(Taiyo Yuden)EBSHSN Series Evaluation Board : Central / Peripherals
CPU :(Nordic) nRF52832 / ARMR Cortex-M4F 32 bit processor 28-pin Land Grid Array / 15GPIOs / SWD
Soft Ver:nRF5_SDK_15.3.0_59ac345

The ble_app_uart program uses UARTE0. However, the correct value is not set in the UARTE0 BAUDRATE register.
(UART0 BAUDRATE value is set)
How can I set the UARTE0 BAUDRATE register correctly?

"Ble_app_uart_c" UARTE0 BAUDRATE register setting is also wrong

[Simonr]

Hi

The baud rate of both UART and UARTE is configured to 115200 in the uart_init() function, which is the default baud rate in our nRF5 SDK examples. What value do you want to set the baud rate to? You can also check the sdk_config.h file and set the NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE to the default baud rate configuration you like.

Best regards,

Simon

[yokokawa]

When used without changing the program, the set value of UART0 is set to UART0 and UARTE0.
Why is the setting value of UART0 set to UART0 and UARTE0 in the program that uses UARTE0?

How can I set the baud rate for both UARTE0 and UART0 correctly?