nrf51 DK JLink not detected by Keil

[Andreas]

My nrf51 DK Board is not detected by Keil as jlink probe, but with other tools. As a result I am unable to download demo projects to my board.

1. unmodified nrf51 dk has been equipped with jlink .bin file via USB bootloader (J-Link OB-SAM3U128-V2-NordicSemi 140918.bin)
2. nrf51 dk is detected as Segger xxxxxx in nRFgo Studio
3. nrf51 dk is detected by segger j-link configuration tool
4. Keil download attempt fails with "No JLink Device found"
5. Keil uVision V5.13.0.0 does not detect jlink under project/options/debug
6. Keil JLink Cmd button detects JLink and reports Cortex M0 of nrf51422 in DOS box
7. Windows Restart did not help
8. a second nrf51 dk hardware shows same behaviour
9. I tried segger 4.96d/f, Keil and nrf Installations in all sequence (incl. manual removal of related folders on HDD and computer restarts)
10. By now there are 4 segger entries that cannot be removed by windows anymore (see picture)
11. Some installled Keil driver seems to be pretty old and seems to be reinstalled everytime Keil 5.13 is installed (see picture)
12. During segger installation I am now getting an install error (see picture)

Please help in getting toochain working properly. Any hints appreciated.

Thanks very much in advance.

[Hung Bui]

Hi Andreas,

It's pretty strange what you described. Have you tried to downgrade Keil to v5.12 ? We've heard there was some other issues with Keil v5.13. If that doesn't fix, could you take some screenshot when in Option->Debug that it doesn't show anything ? Could you also try the lastest Segger v4.96 ? Please avoid letting your Windows to install the driver for Jlink automatically but do it manually with Jlink driver you downloaded. Could you go to Device Manager and find the driver version for CDC Jlink UART port ? ( please take a screenshot)