Issue using AT%XRFTEST command on Thingy:91

[PrashanthVakrani]

Hello,

We are evaluating Thingy:91 for NB-IoT. We want to validate the RF transmit test and are using %XRFTEST command.

The syntax is as follows, AT%XRFTEST=1,1,3,18000,10,0,4,0,0,0

But we are getting only an error message.

The screen shot is here,

Please help us understand why is the command not working

[Heidi]

Hi!

What firmware are you running on the Thingy:91 while doing this? And are you able to send other AT commands to the modem, such as AT+CFUN?

Best regards,

Heidi

[PrashanthVakrani]

Hello,

The Firmware is out of the box what comes with Thingy:91. Not sure if it is V0.2.3 or lesser.

Yes, Other AT commands like AT+CFUN are responding properly. Mostly the Nordic proprietary "Set commands" are not responding.

Regards,

Prashanth

[Heidi]

The Thingy:91 comes shipped with the asset_tracker sample, which connects the device to nRF Cloud. To send AT commands to the modem, I recommend flashing the at_client sample to your device, which you can find in ncs\nrf\samples\nrf9160\at_client. 

Best regards,

Heidi

[PrashanthVakrani]

Hi Heidi,

Thanks for the information. I will let you know how it goes.

Regards,

Prashanth