Quickest path to BLE data exchange...

[Kevin Kachikian]

Hi,

Given the too many examples in the nRF5 SDK that are provided to implement BLE and the unclear documentation on how to best proceed, what would you say is the quickest path to begin development of a bidirectional data transmission in a BLE embedded device? I am seeking to transmit small chunks of proprietary data (maybe 100 bytes/sec) from an embedded device and have it received by another embedded device in close proximity then send the data from the second embedded device on to an iPhone also very close by. I need bidirectional data from iPhone to second device to first device as well, so a two way data stream. Make sense?

I am using v16 (latest I believe) of the nRF5 SDK on an nRF52832.

Thanks,

Kevin

[ovrebekk]

Hi Kevin

I would say the ble_app_uart example is the best place to start if you are looking for a simple two directional proprietary BLE example. 

It sets up a simple service (NUS) with one characteristic for TX and one for RX, allowing you to send strings of variable length from the client to the server and vice versa. 

The ble_app_uart example also integrates nicely with our Android and iOS phone apps, allowing you to test the phone connectivity without having to develop the app yourself. 

You can read more about the example here. 

Best regards
Torbjørn

[Kevin Kachikian]

Thanks Torbjørn. Can you tell me the utility and difference between the BLE Peripheral/UART/Serial Port Emulation over BLE that you recommend and BLE Central/Nordic UART Service Client? 

[ovrebekk]

Hi Kevin

It is quite common to use a mobile phone as the NUS central/client, and the nRF52 as the peripheral/server, but in the case that you want to use an nRF52 device on both sides of the link we also provide a client example for the nRF52. 

This example is set up to connect to any peripheral nearby, allowing you to send NUS data between the two devices.

Best regards
Torbjørn

[Kevin Kachikian]

Thanks again. I guess that's my question. When would one want to start with the server code and when would one want to start with the client code if both examples transmit data both ways? 

[WestCoastDaz]

Hi Kevin,

Are you going to be transfering the data between a mobile device and a Nordic device or between two Nordic devices?

If the former is correct then you want to use the Nordic chip as a Peripheral/Server and the mobile device as the Central/Client.  If it's the latter then one Nordic chip will be the Peripheral/Server and the other a Central/Client.

Cheers,

Darren