Suitable FileSystem for external SLC NAND Flash memory

[masterLee]

Dear all,

I am working on an nRF52840 project that communicates with an external NAND Flash memory and I am looking for a suitable file system for my external flash memory.

The memory I use is a 2Gb (256Mbytes) SPI SLC NAND Flash by Micron (MT29F2G01). I have successfully managed to write, read and erase data in flash without issues.

Now I need something more...elegant and organized so that I can use my Flash memory with files and I am searching for a suitable file system for this cause.

  After a lot of searching I found the following possible solutions but, since I am not an expert on the file system subject  I would need a liitle (lot of) your help and experience  .

• FLogFS                      (link)
• usbd_msc example   (link)
• emFile                        (link)

FLogFS seems to be the most suitable since the memory that is used is an MT29F1 series SPI SLC NAND.

usbd_msc example uses QSPI to communicate with the onboard external memory but the memory is NOR and not NAND. So I don't know if that makes sense mentioning it

emFile supports the memory chip I use but it is difficult for me to understand how to use emFile with nRF52840 and where to start from

[Scott]

I'm also very interested in this topic, working on a system that will record data to a Toshiba (Kioxia) TC58CYG1S3HRAIG SPI NAND Flash.  Any suggestions on which of the above file systems might be most appropriate?  I have also read a little about YAFFS2 (yaffs.net), but the license is GPL V2, and we cannot expose our custom application.  Commercial licenses are apparently available for something around 10K GBP, but that seems really expensive.

Any suggestions on how to integrate a NAND Flash File system with a "bare-metal" nRF52840 application would be greatly appreciated.