Impossible to create a mesh provisioner with pyaci

[AlexisCarb]

Hi,
I'm currently trying to build a provisioner using pyaci and an nrf52 DK: pyaci provisioner

but I end up with these errors every time:

I tried on windows 10, ubuntu 18.04, rapsbian on a pi3b with no luck.

I also tried it on an nrf52840 dk.
I'm using the serial example of the latest mesh sdk with the latest nordic sdk (16.0) and s132 7.01 softdevice.

Best regards

[Mttrinh]

Hi,

Have you made any modifications to the serial example or the PyACI script? Have you tried a different COM port?

[AlexisCarb]

Hi,
Both script/example are from a new mesh/sdk archive, no modifications.
Starting the script on a different COM port just gives a "could not open port" error.
I'm using the COM port that shows in windows device manager or /dev/ttyACM0 under ubuntu

However, I managed to get a new error code in the debugger:

But I don't get it every time I execute the code.

[AlexisCarb]

By the way the serial communcation is definetly working, just tried it with a classic hello world

[Mttrinh]

Can you check with ECHO command immediately after you start seeing the errors? 

Have you installed all python requirements on windows 10? (Installed the requirements using pip)

[AlexisCarb]

Hi,
I installed all the requirement withs pip on both windows and ubuntu.
I tried the echo command after the errors, the board seems unresponsive.

Behaviour is identical under windows.
Thank you for your time.