LwM2M Client sample code issue with Thingy:91

[henry lau]

hi,

I have issue with LwM2M Client sample code loading & compilation.

From the release note, NCS v1.1.0 can support LwM2M on the DK. Confirmed the sample code can be loaded correctly with DK.

Would like to setup on Thingy:91. The project import and setup is done as shown below.

/resized-image/__size/320x240/__key/support-attachments/beef5d1b77644c448dabff31668f3a47-c9f835037c6d4f45837fd863f505eb21/6278.LwM2MClientThingy91_5F00_Issue.PNG

/resized-image/__size/320x240/__key/support-attachments/beef5d1b77644c448dabff31668f3a47-c9f835037c6d4f45837fd863f505eb21/LwM2MClientThingy91_5F00_Issue2.PNG

NCS v1.2.0

SES V4.30c

Thanks a lot.

[Didrik Rokhaug]

Hi.

The resolution of the images is to bad for me to learn much from them, but it looks to me like you are trying to use the secure version of the board.

Bsdlib can only be used by non-secure applications, and you need bsdlib to be able to communicate with the modem.

When importing the project, make sure that you select the non-secure version of the board, i.e. nrf9160_pca20035ns (notice the "ns" at the end).

Best regards,

Didrik

[henry lau]

Thanks. However it doesnt seems to work wit nrf9160_pca20035ns as well.

See attached.

[Didrik Rokhaug]

Did you get another window with errors/warnings first?

If so, that is where the useful information is.

There should also an "Output" panel at the bottom of the Segger Embedded Studio window that when it is set to show the "Output" of the "Transcript", will provide more detailed information. Can you send that information to me?