Hello,
I'm in the process of developing the HW board for a nRF5340-based product.
I need the customer could update the firmware using a serial port (USB or Bluetooth is not acceptable).
Is it possible to do that ? Where to found documentation on this ?
Regards,
Gabriele
Hi Gabriele,
I afraid the nrfutil tool that Igor pointed wouldn't work with the nRF53 (only support nRF52 and nRF5 SDK).
The nRF53 is not supported by our nRF5SDK (which the nrfutil supports)
For nRF53 you would need to use NRF Connect SDK. To do DFU with UART on nRF Connect SDK you would need to use mcumgr and smpsvr.
Please read about the smpsvr here.
And mcumgr here.
We have an example of using smpsvr and mcumgr via UART for the Thingy91 here. It's for the nRF9160 but it should be similar syntax for the nRF53.
Hi Hung,
at first glance this seems a very complicated path. It makes me wonder if it will work in the end.
I'll try to understand the documents you've linked
Hi Gabriele,
I haven't tried it on the nRF53 but, on the nRF91 what we did was:
- Add uart support for mcumgr into boards/arm/nrf9160_pca10090/nrf9160_pca10090_common.dts
https://github.com/osaether/zephyr/commit/fbd3daec22eacd7d2d3b1794bb01d9a263d23868
- Change prj.conf for nRF91 UART transport for smp_svr:
https://github.com/osaether/zephyr/commit/ee8e73de279c1cde0cfbe85392c047349f254fc7
- Then build and flash mcuboot
- Build and flash smp_svr
- Intall MCUMgr command line tool: https://github.com/apache/mynewt-mcumgr#command-line-tool
Use this to list the images in flash, just to test if you can communicate with smp_svr via UART
sudo mcumgr -t 60 --conntype serial --connstring='dev=/dev/ttyACM0,baud=115200' image list
- Test with a helloworld example:
cd ~/ncs/zephyr/samples/hello_world echo "# Enable mcumgr.\nCONFIG_MCUMGR=y" >prj.conf echo "# Ensure an MCUboot-compatible binary is generated.\nCONFIG_BOOTLOADER_MCUBOOT=y" >>prj.conf echo "# Enable NET BUF\nCONFIG_NET_BUF=y" >>prj.conf mkdir build cd build cmake -GNinja -DBOARD=nrf9160_pca10090 .. ninja # Sign the bin-file (the mcumgr cli does only work with bin-files): ~/ncs/mcuboot/scripts/imgtool.py sign --key ~/ncs/mcuboot/root-rsa-2048.pem --header-size 0x200 --align 8 --version 1.0 --slot-size 0x32000 zephyr/zephyr.bin signed.bin
-Perform DFU:
sudo mcumgr -t 60 --conntype serial --connstring='dev=/dev/ttyACM0,baud=115200' image upload signed.bin
- Run the image list above and it should show 2 slots.
Hi Hung,
Thank you, this is a clean step-by-step recipe. I'm sorry I cannot test this in real time. These days much of my effort is on the PCB design. Consider that the DFU must get started from a Windows host, because the product is linked to a Windows PC where the user application runs. Thus, as for the first step, I think I have to install Go for Windows, right ?
I don't think Go is needed for the UART dfu application.
However, DFU update is a quite complex application. I would suggest you to get started with testing normal UART application. You will need to have normal SWD programming (not UART DFU) for the development, make sure you have the SWD accessible and has the programmer (can be a nRF53 DK).
I don't think Go is needed for the UART dfu application.
However, DFU update is a quite complex application. I would suggest you to get started with testing normal UART application. You will need to have normal SWD programming (not UART DFU) for the development, make sure you have the SWD accessible and has the programmer (can be a nRF53 DK).
Hi Hung
Let me sum up the state of art as follow-up to this thread.
I've a nRF5340 custom board and a working Zephyr application I can build (under NCS v1.2.0), flash (using SWD), and run.
The UART works fine, either as console and generic user data.
Now, I want to perform DFU through the UART.
I need to include MCUBoot with MCUmgr with SMP server and Uart transport.
Here is what I've done
1. Add Uart support for mcumgr into board file <ncs>/zephyr/boards/arm/qi2m_nrf5340/qi2m_nrf5340_cpuapp_common.dts
chosen {
...
zephyr,uart-mcumgr = &uart0;
};
2. Change prj.conf of my application by adding
CONFIG_MCUMGR=y
CONFIG_BOOTLOADER_MCUBOOT=y
CONFIG_NET_BUF=y
CONFIG_MCUMGR_SMP_UART=y
3. Rebuilding the application with
$ west build -b qi2m-nrf5340_cpuapp --build-dir buildout
I get the error
..
FAILED: zephyr/autogen/pubkey.c
ModuleNotFoundError: No module named 'cbor'
Is there anything missed ?
Does it help to move to NCS 1.3.0 ?
Thanks
Solved with
$ sudo pip3 install cbor
Hi Hung
I'm trying to follow your initial recipe
a) Build and flash mcuboot
$ cd <ncs>/bootloader/mcuboot/boot/zephyr
$ west build -b qi2m_nrf5340_cpuapp --build-dir buildout
$ nrfjprog -f nrf53 --program buildout/zephyr/zephyr.hex
I check out reading flash. One image found at
0x00000000 - 0x0000891f (35104 B)
b) Build and flash smp_svr
$ cd <ncs>/zephyr/samples/subsys/mgmt/mcumgr/smp_svr
$ vim prj.conf
Add these lines
CONFIG_MCUMGR_SMP_UART=y
CONFIG_NET_BUF_USER_DATA_SIZE=7
$ west build -b qi2m_nrf5340_cpuapp --build-dir buildout
$ nrfjprog -f nrf53 --program buildout/zephyr/zephyr.hex
I check out reading flash. Two images found at
0x00000000 - 0x0000891f (35104 B)
0x00010200 - 0x0001a62b (42028 B)
On board restart I get out of UART
*** Booting Zephyr OS build v2.3.0-rc1-ncs1 ***
[00:00:00.003,051] <inf> mcuboot: Starting bootloader
[00:00:00.009,063] <inf> mcuboot: Primary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
[00:00:00.019,165] <inf> mcuboot: Boot source: none
[00:00:00.024,566] <wrn> mcuboot: Failed reading image headers; Image=0
[00:00:00.032,012] <err> mcuboot: Unable to find bootable image
Issuing from host the test command
$ mcumgr -t 20 --conntype serial --connstring='/dev/ttyUSB0,baud=115200' image list
I get "Error: NMP timeout"
What a hell to do ?
Hi Gabriele,
I'm sorry that it's been a long time and you still having issue with FOTA on nRF53.
We now have better documentation for nRF53 including FOTA instruction.
Please have a look here:
https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/ug_nrf5340.html#fota-upgrades
The instruction is for FOTA using BLE. And I think you should test first using this transport. Just to make sure smpsvr is working fine. After that you can change CONFIG_MCUMGR_SMP_BT to CONFIG_MCUMGR_SMP_UART to support UART (and add CONFIG_SERIAL=y)
