i want to start evaluating FTP client in nrf9160 SoC. Can you provide an example code for FTP client mode.
i want to start evaluating FTP client in nrf9160 SoC. Can you provide an example code for FTP client mode.
Hi Praveen,
You could use this (unofficial) sample https://github.com/Rallare/fw-nrfconnect-nrf/blob/nrf9160_samples/samples/nrf9160/ftp/src/main.c as a reference point to make a FTP client.
Can you provide any documentation which explains the FTP client configuration for nrf9160
Hi Praveen,
Since this is not an official sample in NCS there is no official documentation for it.
However, I will do my best to help you out with any specific questions you have about it.
Hi Martin,
I have started using above app.
I have changes the ip address of my server as shown below
below is the error screen.
Hi, it is my understanding that you are using a CMW500 callbox to do the testing? Based on the IP address of your FTP server, 192.168.1.80, I assume that the FTP server is on your local network and you want the nRF91 to be communicating with this server through the CMW500. So first I want to be sure that you have setup the CMW500 Data Application Unit properly in order to communicate with your local network.
First make sure that your local network is connected to the "LAN DAU" network port on the back side of the CMW500.
In the signaling task, after the LTE devices has connected, verity that the given IP address matches the local network subnet:
Also make sure that the "connection type" is set to "Data application" in the Config window:
Now you should be able to communicate with the local FTP server through the FTP client example.
For more information about configuring the CMW500, please refer to the R&S CMW500 user manual or the R&S CMW Data Application Unit user manual.