SoftDevice version included in nRF Connect SDK

[Yuuki Taguchi]

I want to develop a device with the following selection.

• BLE module: Raytac MDBT42V (nRF52832)
• nRF Connect SDK v1.2.0

Where can I check the version of SoftDevice when registering for Bluetooth SIG?

I checked follow table.
https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcomp_matrix_nrf52832%2FCOMP%2Fnrf52832%2Fble_qdid_qual_matrix.html&cp=4_2_2_4

[bjorn-spockeli]

Hi Taguchi-san,

The nRF Connect SDK does not use our SoftDevices, but the Zehyr BLE Host Layer in combination one of the two BLE controllers that the nRF Connect SDK supports, see Bluetooth Stack Architecture

The two controllers are: 

1.  Zephyr Bluetooth LE Controller, see https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/ug_ble_controller.html#zephyr-bluetooth-le-controller
2. nRF Bluetooth LE Controller, see https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/ug_ble_controller.html#nrf-bluetooth-le-controller

The relevant QDIDs are listed under Bluetooth Qualification in the Zehpyr Project. 

 https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/zephyr/guides/bluetooth/bluetooth-qual.html

Best regards

Bjørn

[laurentc]

Hello, 

looking at https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/zephyr/connectivity/bluetooth/bluetooth-qual.html

should I understand that these QDID apply only to the Zephyr Bluetooth LE Controller ? 

Or it applies also to the nRF Bluetooth LE Controller ?

I am working with nRFConnect 2.1.0 which seems to be based on Zephyr version 3.1.(99).

Zephyr version 3.1.x.does not appear in the tables.

I can't find where/how the nRF Bluetooth LE Controller versions are listed/managed re the certifications. 

regards,

Laurent