How to implement RFID reader program using nRF24lE1

[Tiny Prawn]

I'm reseaching a tag in low energy-cost using the nRF24le1.Till now,I can receive the message from the tag successfully, but can't send the command to the tag to read or write data from the flash smoothly.It can't respond to the command successfully every time . I wonder if someone could give me a example about developing a low-energy cost active tag.:)

[Bastiaan]

Maybe this NFC reader will fit: http://www.gsm-modem.de/M2M/m2m-componets/e-paper-label-with-nfc-link/

[Guest]

Maybe this NFC reader will fit: http://www.gsm-modem.de/M2M/m2m-componets/e-paper-label-with-nfc-link/

[Ole Morten]

I'm not sure I understand what the problem might be, but in the nRFgo SDK, there are a couple of simple examples showing data transfer that might be useful to you. I'd especially recommend you to take a look on the enhanced_shockburst examples.

[Tiny Prawn]

Ole,thanks,I have read the nRFgo SDK .but ,I still don't Know,how to implement a low energy tag that can receive and trasmit data with the reader.I wonder can you give me a complict example to show the process.In fact I'm confusing about how to set the delay time for tag receiving and transmitting the data.If you still don't understand the problem I met,just give me a example to making a low-energy tag with nRF24le1.Thank you!

[Ole Morten]

I'm sorry, but I don't have any such example, and I can't make one specifically for you. I'd recommend you to take a close look on the example applications in the SDK and try to make something yourself. If you have specific questions, we can try to answer them either posted as separate questions here or if you post a regular support case.