SDK16
S132
nrf52832
SES / Windows 10
After much searching this site and the web in general I'm reaching out for support.
While in low-power mode I'm seeing a pulse between 11uA and 30 uA every 4ms. I'm pretty much down in the nA range between pulses.
I've verified it's not environmental as another device (legacy) appears to be clean. Hardware is identical - so I'm thinking it's in my firmware,.
GPIOS are turned off as is the ADC.
Wondering if anyone else has seen this - what peripheral on the device would operate at this interval while in low power.
Thanks in advance for any advice,
Peter