Flashing NRF52832 with Jlink on Raspberry Pie

[cyrine]

Hello,

I am trying to flash my NRF52832 device with "JLink_Linux_V670a_arm" using a Raspberry Pie, a JlinkScript and an sh Script but I keep getting these errors. Could you please help me understand what should I do or change.

error messages:

SEGGER J-Link Commander V6.70a (Compiled Mar 30 2020 17:45:37)

DLL version V6.70a, compiled Mar 30 2020 17:45:18

 

 

J-Link Command File read successfully.

Processing script file...

 

J-Link Commander will now exit on Error

 

J-Link connection not established yet but required for command.

Connecting to J-Link via USB...O.K.

Firmware: J-Link V10 compiled Apr 23 2020 16:49:14

Hardware version: V10.10

S/N: 600109941

License(s): RDI, FlashBP, FlashDL, JFlash, GDB

VTref=2.958V

Target connection not established yet but required for command.

Device "NRF52832_XXAA" selected.

 

 

Connecting to target via SWD

InitTarget() start

InitTarget() end

Found SW-DP with ID 0x2BA01477

DPIDR: 0x2BA01477

Scanning AP map to find all available APs

AP[2]: Stopped AP scan as end of AP map has been reached

AP[0]: AHB-AP (IDR: 0x24770011)

AP[1]: JTAG-AP (IDR: 0x02880000)

Iterating through AP map to find AHB-AP to use

AP[0]: Core found

AP[0]: AHB-AP ROM base: 0xE00FF000

CPUID register: 0x410FC241. Implementer code: 0x41 (ARM)

Found Cortex-M4 r0p1, Little endian.

FPUnit: 6 code (BP) slots and 2 literal slots

CoreSight components:

ROMTbl[0] @ E00FF000

ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB00C SCS-M7

ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 003BB002 DWT

ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 002BB003 FPB

ROMTbl[0][3]: E0000000, CID: B105E00D, PID: 003BB001 ITM

ROMTbl[0][4]: E0040000, CID: B105900D, PID: 000BB9A1 TPIU

ROMTbl[0][5]: E0041000, CID: B105900D, PID: 000BB925 ETM

Cortex-M4 identified.

Erasing device...

Comparing flash   [100%] Done.

Erasing flash     [000%]

****** Error: Failed to erase chip.

Failed to execute RAMCode for chip erase!

J-Link: Flash download: Total time needed: 0.019s (Prepare: 0.012s, Compare: 0.000s, Erase: 0.006s, Program: 0.000s, Verify: 0.000s, Restore: 0.000s)

 

****** Error: Failed to restore target. RAMCode never stops

ERROR: Erase returned with error code -5.

 

Script processing completed.

eoe 1
erase

Loadfile /home/pi/Desktop/Git/firmwareTedTools/input/bootloader_merged.hex

Loadfile /home/pi/Desktop/Git/firmwareTedTools/input/app_merged.hex

W4 0x75000 , 0x00050200

W4 0x75004 , 0x4b646554
W4 0x75008 , 0x006f

W4 0x75014 , 0x0052

W4 0x75018 , 0x0033

W4 0x7501c , 0x00

W4 0x75028 , 0x14

r
go
q

#!/bin/bash
/home/pi/Desktop/rasp/JLink_Linux_V670a_arm/JLinkExe -device NRF52832_XXAA -if SWD -speed 4000 -autoconnect 1 -CommanderScript /home/pi/Desktop/Git/firmwareTedTools/output/flash_script.jlink

[Stian Røed Hafskjold]

Is this only on the RPi or do you see the same thing on your computer? Which JLink type/version are you using?

[cyrine]

It works fine with my computer ! I am using "JLink_Linux_V670a_arm".

[cyrine]

Jlink version :10.1

[Stian Røed Hafskjold]

If you tried the same script on your computer, and it works fine. With the same JLink version and debugger. And you also tried Michael's suggestion above to include a 'r' and 'h' before erasing, I'm not really sure what is wrong. You can ask in the Segger forum if they have any ideas.

What happens if you open JLinkExe without any parameters, and do the connect, erase, etc. manually? Does it still fail on the erase? What if you do a full erase of the chip on your computer first and then try to just load the file on the RPi without running the erase command first? Is it still failing?