Using RTC to control the real timestamp

[Adeel]

Hi Dev Team,

I had a task to work on that required a timsetamp to schedule a certain event, like for example I wanted my modem to start off every morning at 10:00:00 and switch off at 10:05:00.

What could be the best way to achieve this kind of functionality ?

Regards,

Adeel.

[ovrebekk]

Hi Adeel

You might want to have a look at the calendar example on our Github account:
https://github.com/NordicPlayground/nrf5-calendar-example

It basically uses the standard time.h library in C to decode rolling second counter into seconds, minutes, hours, days etc, and uses the RTC timer in the nRF52 to update the time every second. 

Please be aware that if you need to keep track of time over long periods you should use an external 32k crystal for the best accuracy.

Best regards
Torbjørn

[Adeel]

Hi Torbjorn,

Is  there any possibility of an example for nRF9160DK. I am using NCS v1.3.0 nRF Connect for desktop and running the asset tracker application. 

I tried using the date_time.h library to try and get the time either using NTP or through MODEM. I can use the AT+CCLK command to fix the time manually and then read it but I would like the network to get the current time for me.   

Regards,

Adeel.

[ovrebekk]

Hi Adeel

My bad, I thought you were using an nRF52 series device. 

I don't have a lot of experience with the nRF9160, but I got a tip from a colleague that the SNTP library might provide what you need:

https://docs.zephyrproject.org/latest/reference/networking/sntp.html

Best regards
Torbjørn

[Adeel]

Hi Torbjorn,

I am trying to use the date_time.h library that incorporates SNTP in it. When i try to run it, I get the following errors that I am unable to solve.

 2020-08-20T11_12_42.702Z-log.txt

Could you let me know the methods to solve this error that I am getting. This is using the date_time.h library.

Regards,

Adeel.

[ovrebekk]

Hi Adeel

Looking at the log it appears you are disabling the modem before this issue occurs:

2020-08-20T11:13:04.559Z DEBUG modem << AT send: AT+CFUN=0

Can you confirm whether or not this was intentional?

After disabling the modem you can see that you get detached, and at this point the data connection is lost. 

Best regards
Torbjørn

[Adeel]

Hi Tobjorn,

Yes, I was trying to turn off my modem for a certain time and then turn it back on later. Even when it is turned back on (AT+CFUN = 1), I still get the same error. 

2020-08-20T11:13:36.441Z DEBUG modem << AT send: AT+CFUN=1
2020-08-20T11:13:36.546Z DEBUG modem << AT ret: OK
2020-08-20T11:13:37.283Z DEBUG modem << [00:01:05.495,147] [1;31m<err> date_time: sntp_query, error: -1[0m
2020-08-20T11:13:37.294Z DEBUG modem << [00:01:05.503,540] [1;31m<err> date_time: getaddrinfo, error: -11[0m
2020-08-20T11:13:37.302Z DEBUG modem << [00:01:05.513,458] [1;31m<err> date_time: getaddrinfo, error: -11[0m
2020-08-20T11:13:37.312Z DEBUG modem << [00:01:05.522,064] [1;31m<err> date_time: getaddrinfo, error: -11[0m
2020-08-20T11:13:37.319Z DEBUG modem << [00:01:05.530,700] [1;31m<err> date_time: getaddrinfo, error: -11[0m
2020-08-20T11:13:37.329Z DEBUG modem << [00:01:05.538,482] [1;31m<err> date_time: Not getting time from any NTP server[0m

Is there any procedure or a way to use the date_time library. Is there any specific example to use that library ?

[ovrebekk]

Hi Adeel

After turning the modem back on it will take some time for it to reconnect to the network. 

If you wait for the CEREG notification informing you that the modem is connected is the date_time library still reporting errors?

Best regards
Torbjørn

[Adeel]

Hi Tobjorn,

Unfortunately yes, its still reporting the same error. The CEREG value says the modem is connected but the error still remains. Is there any way or other example where this could have been implemented for a reference ?

Regards,

Adeel. 

[Adeel]

This is the output coming up on the screen. I even tried different NTP servers to try and get the error out.

Regards,

Adeel.