NRF_Fstorage Address Issue

[Ahtasham Baig]

Hi i am working on project where i need to store logs on flash, i included nrf_storage and set start address 0x42000 and end address 0x50000 according to my application, my product contains softdevice, application and bootloader.... but when i try to read write or erase specific address it get stuck ... my application is based on FreeRTOS 

[Jørgen Holmefjord]

Hi,

What exactly do you mean by "it get stuck"? Do you get a hardfault, an error, code stuck in a loop waiting for an event, etc.?

Can you post the code you used for configuring fstorage, and how you perform the read/write/erase operations?

Have you made sure that the start and end addresses used for fstorage does not overlap with the application code area?

Best regards,
Jørgen

[Jørgen Holmefjord]

I would recommend you to check the return code, rc, from nrf_fstorage_write. The destination address needs to be word-aligned, which it does not seems to be. 

You may also debug the application to see exactly where the code is stuck.

[Jørgen Holmefjord]

Can you post the code full code for the read? How does it get stuck? Are you getting an error, stuck in a loop, etc?

[Ahtasham Baig]

Here is my code Snippet;

[Jørgen Holmefjord]

The following line seems to cause a hardfault in your application:

NRF_LOG_INFO("Data: %s read at flash", readdata);

You declare readdata as a char pointer, and set this to NULL. Then you pass a reference to this pointer to the nrf_fstorage_read function, but this will not store the pointer to the actual data in the readdata pointer, this will still be NULL after the function call.

You can read the data like this:

char readdata[12] = {0x00};

rc = nrf_fstorage_read(&fstorage, 0x42000, readdata, 12);
APP_ERROR_CHECK(rc);

NRF_LOG_INFO("Data: %s read at flash", readdata);

wait_for_flash_ready(&fstorage);

[Ahtasham Baig]

Hi i tried your method it is working but there is an issue i need to read schedules upto 200 byte so i am reading 256 bytes ... but there is issue i need to read multiple address at startup and when i ready single it reads correct data but later when i tries to read multiple addresses it either not completely reads data or gives error 
my address are as 
0x42000 for 12 BYTE DATA

0x42100 for 256 BYTE Data

0x42400 for 256 byte data

[Ahtasham Baig]

Issue resolved