The radio project example can not modify param to run IEEE802.15.4-2006?

[jiabchen]

Hi 

Can I not modify the param the radio project example,and let it run on IEEE802.15.4-2006?

and the demo example run on 2.4GHZ?

I modified two params:

NRF_RADIO->MODE      = (RADIO_MODE_MODE_Ieee802154_250Kbit << RADIO_MODE_MODE_Pos);

NRF_RADIO->PCNF0 = (PACKET_S1_FIELD_SIZE << RADIO_PCNF0_S1LEN_Pos) |
(PACKET_S0_FIELD_SIZE << RADIO_PCNF0_S0LEN_Pos) |
(PACKET_LENGTH_FIELD_SIZE << RADIO_PCNF0_LFLEN_Pos);

#define RADIO_PCNF0_LFLEN_Pos (3UL)

Thanks!

[ovrebekk]

Hi

What are you trying to do with the example?

If you want to run an RF protocol based on 802.15.4 I would greatly recommend using the 802.15.4 radio driver, available here. 

Then you don't need to implement the entire protocol from scratch. 

One of my colleagues also wrote a simple transmitter/receiver example based on the above driver, which he shared here:
https://github.com/jorhol/nRF-Radio-802.15.4-Projects

Best regards
Torbjørn

[jiabchen]

Hi ovrebekk

OK,I know your words.you mean that use the 802.15.4 example,I just want to make sure that:

The radio project can run 250kbps？

I checked the datasheet and the example source code,it seem that modified right,but no enable this function.

Thanks!

[ovrebekk]

Hi

Yes, the only 820.15.4 bitrate we support is 250kbps. 

You can see this from the MODE register definition in the RADIO peripheral, here. 

Best regards
Torbjørn