nRFcloud could not get the locations from thingy 91

[Rkidechaa]

I have bought two thingy 91 to develop the tracker using GPS and accelerometer. I did all the step by step to load pre-compiled hex file given on the website. Then I created the account on cloud and it worked properly. After a week LTE device is not getting connected to GPS at all. I do not know what is wrong with the device. Am i missing something?  

please guide me to solve above problem

[Martin Lesund]

Hi Rkidechaa,
So I assume you successfully went through all the steps shown here. 

So you where able to get GPS data before?

Are you outside when testing the GPS? (holding in the button ~10sec to enable GPS)

Are you using LTE-M or NB-IoT?

Please connect the thingy:91 to a PC and send me the serial output log so we could see whats going on in the application.

Best regards,
martin L.

[Rkidechaa]

Thank you for asking martin.

I solved the problem by myself only.

The problem was I soldered the SB5 pad which was connecting the INT2 pin of ADXL372 to P0.10 pin of nRF9160.I guess this pin is not used in precompiled code (thingy91_ltem_dfu_2020-04-29_bc7ade8b) which might be the reason.

Thanks you.

[Martin Lesund]

Hi Rkidechaa,

Awesome!
Thank you very much for describing on how you solved the issue as well.

best regards,
Martin L.