Flash Memory Issue

[Muqarrab]

Hi,
I have written these 3 functions to erase/read and write.

/////////////////////////////////////////////////////////////////////////////// SNV

const uint32_t f_addr = 0x000FF000; // Last page start address 255

// Create a pointer to that address
uint32_t * p_addr = (uint32_t *)f_addr; //cast f_addr to a pointer

uint32_t erase_SNV()
{
    NRF_LOG_INFO("Memory Erased");
    return sd_flash_page_erase(255);
}


uint32_t write_SNV(int address,uint8_t value)
{
    uint32_t val;
    val=value;
    NRF_LOG_INFO("Data Write in Flash");
    ret_code_t err_code;
    err_code = sd_flash_write(p_addr+address, &val, sizeof(val));
    APP_ERROR_CHECK(err_code);
    return err_code;
}

uint32_t read_SNV(int address)
{
     NRF_LOG_INFO("The Data read from flash is: %d", *(p_addr)+address);
     return *(p_addr)+address;
}

When I write any value from address 1 it gives following wrong output(0 1 2 3).

    write_SNV(1,11);
    read_SNV(1);
    write_SNV(2,12);
    read_SNV(2);
    write_SNV(3,13);
    read_SNV(3);

  //  read_SNV(0);
    read_SNV(1);
    read_SNV(2);
    read_SNV(3);

 



But When I start address from 0 it gives the right values.

    write_SNV(0,10);
    read_SNV(0);
    write_SNV(1,11);
    read_SNV(1);
    write_SNV(2,12);
    read_SNV(2);
    write_SNV(3,13);
    read_SNV(3);

    read_SNV(0);
    read_SNV(1);
    read_SNV(2);
    read_SNV(3);

How can I save values in rondom addresses?
Thanks!

[Simonr]

Well, yes. You can see all the addresses that are programmed in this log, which tells you what addresses are written to during the programming of this application, so you can add the KB sizes under the Downloading 'ble_app_template_pca10056_s140.elf' to J-Link line to find the total size of your application. The SoftDevice and MBR will come in addition to this (mentioned earlier in the log).

Best regards,

Simon

[Muqarrab]

Thanks Simonr

Now, which start and end I should use for FStorage?

Can you please guide me?
Thanks

NRF_FSTORAGE_DEF(nrf_fstorage_t fstorage) =
{
    /* Set a handler for fstorage events. */
    .evt_handler = fstorage_evt_handler,

    /* These below are the boundaries of the flash space assigned to this instance of fstorage.
     * You must set these manually, even at runtime, before nrf_fstorage_init() is called.
     * The function nrf5_flash_end_addr_get() can be used to retrieve the last address on the
     * last page of flash available to write data. */
    .start_addr = 0xd8000,//f4000
    .end_addr   = 0xd9000,//0xf4fff
};