TWI Module lock-up still present in nrf51822 v3 [PAN #56]

[Mike]

Hi,

I am currently experiencing TWI module lock-up issues with the hardware TWI library, which is supposedly fixed according to PAN v3.0, issue #56. (The issue was previously identified in PAN v2.3)

My setup is as follows, custom board, SD110v8, NRF51822 QFAAH0 (16kB flash, v3 silicon). My code is modified from the dfu_ble_dual_bank example in the Keil packs. The TWI transaction is triggered every 2s by the app_timer.

If I change the TWI library to software TWI, then the problem disappears.

An interesting note is, before the dfu bootloader starts (prior to the function call of : bootloader_dfu_start ), the module lock up doesnt seem to happen. Once the bootloader fully starts, (after calling bootloader_dfu_start function), the TWI transaction would randomly occur, fairly frequently.

Could someone from Nordic provide some insight to this problem? As my observations seem to contradict the PAN v3.0

Warm regards, Mike

[MartinBL]

Hi. Which TWI driver are you using. I'm afraid that there are a couple of different versions out there. I have attached the TWI hardware driver included in SDK v8 which is supposed to have corrected for PAN 56.

twi_hw_master.c

[Mike]

Hi all,

RK's comments pretty much covered everything for me (thanks!)

@Martin, by the way, the .c file you posted is the same as the one I used.

As mentioned previously, I am curious why the lock up still happens. According to PAN v3.0, this issue should be fixed in hardware in the v3 silicons.

Thanks, Mike