Connecting via ANT+ to Garmin GSC10 ?

[RixtronixLAB]

Dear Members,

How can I connect via ANT+ to Garmin GSC10 ?

then display cadence and speed value in UART ?

Is it related with this function in ant_bsc_rx_d52_s212.uvprojx  ant_bsc_evt_handler(ant_bsc_profile_t * p_profile, ant_bsc_evt_t event)

?

Thanks

[Kenneth]

Hello,

I think this should be described here:
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v17.0.2/ant_examples_bicycle_spd_cad.html

To work with ANT+ devices (or ANT+ simulator tools) you need to add the ANT+ network key (to ant_key_manager_config.h):
https://infocenter.nordicsemi.com/topic/sdk_nrf5_v17.0.2/ant_examples_bicycle_spd_cad.html#ant_bsc_test_3

Best regards,
Kenneth

[RixtronixLAB]

Thanks Kenneth

[RixtronixLAB]

How can I migrate ant_bsc_rx_d52_s212.uvprojx to s340 ? what do I need to change ? thanks

[Kenneth]

You can for instance open the pca10040/s212 project that you want to turn into pca10056/s340 in notepad++, and compare with a project that is already setup for pca10056/s340. This should look something like this:

You can keep all pca10056, nrf52840, s340, ram and flash specific information in the project, but need to copy all include paths and similiar from the pca10040/s212 project. Then you will end up with something like this:

Remember that the include directories should point to the s340 instead of s212, else it's mostly copy and paste between the two. Finally you can rename the ant_msg_types_master_pca10056_s340.emproject (that I used for basis here) to for instance ant_bsc_rx_pca10056_s340.emproject.

I haven't tested the project, but the updated project based on the above is attached.

1663.ant_bsc_rx_pca10056_s340.zip

[RixtronixLAB]

Thanks,

It's running on S340, what function will I use for scanning GSC10 and display the data from it ?