Using UARTE0 and UARTE1 in different pins ?

[RixtronixLAB]

Dear Members,

I saw this example,

https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.sdk5.v15.2.0%2Fserial_uartes_example.html

I can not find this example on SDK 17,

How can I use UARTE0 and UARTE1 on separate port ? one is for debugging via USB and the other one for communicating with GPS UART ?

Any suggestions ?

Thanks

[Jared]

Hi,

The Serial port library has been deprecated and has been replaced with the libUARTE module. We have a libUARTE example in the SDK that only uses one instance but clearly shows how to define an instance and initialize it. It should be possible to repeat this for a second UARTE instance. If you want to use two UARTE instances then you have to enable both instances in the config file and resources that the module is dependent on ( Timer and PPI) . Next you have to define an instance of the module and initialize it in the project.

regards

Jared 

[RixtronixLAB]

Hi Jared,

Thanks for the reply,

I will learn this libUARTE example and keep posted,

Is libUARTE in the example working by DMA or interrupt ?

This example is not working with Softdevice, isn't it ?

Cheers