Flashed PCB doesn't boot to app (stays in bootloader)

[QuentinFarizon]

I am trying to port my working application from a nrf52811/s112 to nrf52832/s132, both with SDK 16.0.0.
I'm at the end at the process, it builds fine on nrf52932, I just can't get my app to boot.
It stays in bootloader, very probably because it doesn't launch the app. It advertises as 'DfuTarg'.

I suspected a CRC issue, so I have tried setting NO_CHECKS when building the bootloader, without luck.

Here is my build process (note that I use the same process to flash the same application to nrf52811/s112) :

# Build
emBuild -config 'Release' sdk16.0.0/projet/dfu/secure_bootloader/dfu_boks/ses/secure_bootloader_ble_52832_s132.emProject
emBuild -config 'Release' sdk16.0.0/projet/app/app_boks/s132/ses/soft_my_app_52832_s132.emProject

# Settings.hex generate
nrfutil settings generate --application <my_app>_52832_s132.hex --application-version-string 2.4.2 --family NRF52 --bootloader-version 2 --bl-settings-version 2 --app-boot-validation VALIDATE_GENERATED_CRC settings.hex

# Merge hex
mergehex -m my_app_52832_s132.hex bootloader_52832_s132.hex settings.hex -o tmp.hex
mergehex -m tmp.hex s132_nrf52_7.0.1_softdevice.hex -o app_bootloader_settings_softdevice.hex

# Program
nrfjprog --eraseall
nrfjprog --program app_bootloader_settings_softdevice.hex
nrjprog --reset

Here is my bootloader placement settings, copied from the SDK example (using default flash_placement.xml from the SDK example) :

linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x26000;FLASH_SIZE=0x5a000;RAM_START=0x20002220;RAM_SIZE=0xdde0"
linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000;uicr_bootloader_start_address RX 0x10001014 0x4;bootloader_settings_page RX 0x0007F000 0x1000;uicr_mbr_params_page RX 0x10001018 0x4;mbr_params_page RX 0x0007E000 0x1000"

Here is my app placement settings, copied from the SDK example (using default flash_placement.xml from the SDK example) :

linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x26000;FLASH_SIZE=0x5a000;RAM_START=0x20002220;RAM_SIZE=0xdde0"
linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000"

Here is the generated settings.hex :

Bootloader DFU Settings:
* File: settings.hex
* Family: nRF52
* Start Address: 0x0007F000
* CRC: 0xBEC1BE15
* Settings Version: 0x00000002 (2)
* App Version: 0x00004FB2 (20402)
* Bootloader Version: 0x00000002 (2)
* Bank Layout: 0x00000000
* Current Bank: 0x00000000
* Application Size: 0x0000C1A0 (49568 bytes)
* Application CRC: 0x00061612
* Bank0 Bank Code: 0x00000001
* Softdevice Size: 0x00000000 (0 bytes)
* Boot Validation CRC: 0x52CA2133
* SD Boot Validation Type: 0x00000000 (0)
* App Boot Validation Type: 0x00000001 (1)

What am I missing ? Thanks !

[Einar Thorsrud]

Hi,

You are right that the bootloader does not start the app, and a probable reason is invalid CRC. You could verify this by testing the debug bootloader with RTT logging, or by simply removing the CRC check for now. There is no configuration macro for that (not sure where you found NO_CHECKS?), but you can modifying crc_on_valid_app_required() in components\libraries\bootloader\nrf_bootloader.c to always return false. If that makes the app load as expected, then there is an issue with the CRC check for some reason. Can you tell me the result of this test?

If we assume for now that the CRC is invalid, then that can either be caused by an incorrect CRC in the bootloader settings page or that the application flash area has changed.

Typical reasons for incorrect CRC is either missing or incorrectly generated settings page, or for instance that you have generated a settings page hex that does not include the backup page, even though it is used (in MBR params page). The latter could happen if using a too old nrfutil version or using --no-backup, though I see that is not the case here).

[QuentinFarizon]

NO_CHECKS is a macro that I have in the bootloader (added in our project) that deactivates checks in crc_on_valid_app_required

So I have already tried your first suggestion and it didn't work unfortunately. I guess that rules out a failed CRC check ?


I am indeed not using --no-backup, and I'm generating settings from the same hax that I merge later in the script.

[QuentinFarizon]

I can successfully connect with RTTViewer, but there is no output even though I'm using the same bootloader that gives me output on the DK

[Einar Thorsrud]

I see. So with the exact same merged hex file that works on the nRF52832 DK your custom HW stays in the bootloader. According to the log in an eternal loop where it seems to start the app, but then there must be a reset for some reason, as the bootloader starts again right after. Is that a summary of the current state?

Regarding missing RTT output that can be explained if you have had some other firmware before and did not power-cycle and that results in two RTT buffers at different locations, and the RTT viewer finding the wrong one first. But if you still don't get RTT logs after power-cycling that is not the case. This leads me to another question. Do you know that the board works at all? What if you test with the blank blinky example (no SoftDevice) without any bootloader? Specifically, first erase the board using "nrfjprog -e" and then flash blinky_pca10040.hex from examples/peripheral/blinky/hex/ ?

A typical reason for applications that work on a DK to fail on a custom board is a custom board without a 32 kHz LF clock. This is not relevant for the blinky example though, as it does not use any resources except for a few GPIO output pins. This leaves me without a lot of ideas. Can you upload schematics of your custom board? I am not looking for anything particular, but perhaps it would show something interesting.

[QuentinFarizon]

Ok I didn't know you could flash the app alone !
Working from this, I managed to flash blinky on my board, and then my app, and then app+bootloader, by fixing the flash/ram placement (not sure what I changed).

I've managed to understand the reboot, due to crashes in my app during memory access, I'll open a new ticket for that if needed.

[Einar Thorsrud]

That makes sense, which is always good

[QuentinFarizon]

Just for your information, I was bit by this : https://devzone.nordicsemi.com/f/nordic-q-a/29041/how-to-enable-p0-09-and-p0-10-as-gpio-pins-on-the-nrf52-instead-of-nfc-pins which messed my SPI pin