NRF5340 DK开发板摸底蓝牙RF性能指标 DTM模式/DUT

[mingtianxinzhi]

1. 已下载并参考"nRF5340 DK PB 1.0.pdf"指导文档；

2. 安装 nRF Connect for Desktop v3.6.1工具（电脑OS Win10），安装界面如下：

没有文档里说的那些programming，是哪里安装有误吗？

3. 板卡使用USB接电脑，power switch波到on，第一个LED灯闪烁，板卡应该是已经工作了；

4. 已下载JLink驱动，如何烧写对应的测试项的程序呢？

主要是想测试下BLE的功能性能和RF_RX/TX 性能，不知该如何烧写code？

还请回复指导或是电话沟通，李工，15901123309

非常感谢

[Henry_Chou]

使用Kel C或是segger embedded studio (SES)下載example範例編譯後燒錄即可，但需要注意的是，若是含 SD(softdevice)的專案，則要先燒錄SD，

3.6.1尚有一些連結裝置的bug，能行的話，到歷史區下載3.6.0為好。

[mingtianxinzhi]

Hi，Henry

Thanks for your reply。

 The APP of nRF Connect for Desktop is OK, and installer the programmer, but it is not connect to device。

.

Running a first test 烧写

Initially, it could connect device, I try to use nRF Connect Programmer to program the HEX files of

Heart Rate Monitor (HRM) demo application, than click "erase & write"putton, programming  failure. Then I try to connect to device again,and it count not open device.

The programmer 's log is as follows:

The Uart COM port's log is as follows：

I want to measure the power consumption and RF performance of BLE without the need to develop programs. Do we have ready-made software or operating guidelines？

Please help to answer.

Thank you very much.

Best regards！

Mingtianxinzhi