asset_tracker is starting, but modem_configure does not return in ().
What could be the cause?
asset_tracker is starting, but modem_configure does not return in ().
What could be the cause?
Hi!
It seems like the device might be struggling with connecting to the network. To make it easier for me to help you could you answer the following questions:
- Which version of NCS are you using?
- What network are you trying to connect to (NB-IoT/LTE-M)?
- Which version of the Thingy:91 do you have?
- Who is your SIM-provider?
Best regards,
Carl Richard
NCS V1.4.2
LTE-M
Thingy91 1.4.0
I'm using the SIM that comes with it.
Ok, thanks. Have you done any modifications to the code?
And could you try to see if you are able to connect using the at_client sample in the SDK?
Best regards,
Carl Richard
You have made changes, but not at initialization.
at_client the following display after running the following display.
I don't know what to do after this.
*** Booting Zephyr OS build v2.4.0-ncs2 ***
The AT host sample started
Could you send the following sequence of commands into the at_client sample:
AT+CFUN=1
AT+CFUN=0
And give me the output? Please give the modem some time(~1 minute) to turn on after issuing AT+CFUN=1.
Best regards,
Carl Richard
LTE Link Monitor cannot connect.
Since I was able to connect with J-Link RTT Viewer,
I tried to throw at command.
Nothing happens.
Since I was able to connect with J-Link RTT Viewer,
I tried to throw at command.
Nothing happens.