GPIO Trouble porting from 1.2.0 - 1.4.2

[Randall]

I'm porting my system from 1.2.0 SDK to 1.4.2.  The GPIO API has changed quite a bit.  I have this problem that when I'm enabling some GPIO to be on interrupts, it seems to break my gpio_pin_read_raw results.  When I initialize this interrupt gpios I make this call;

int WakeupInit(wakeup_handler_t wakeup_handler)
{
    int err;
    uint32_t wakeup_val;

    wakeup_handler_cb = wakeup_handler;

    gpio_dev = device_get_binding(DT_LABEL(DT_NODELABEL(gpio0)));
    if (!gpio_dev) {
            printk("Cannot bind gpio device\n");
            return -ENODEV;
    }
    

    err = configure_sources();
    if (err) {
            printk("Cannot configure wakeup sources\n");
            return err;
    }


    for (size_t i = 0; i < ARRAY_SIZE(wakeup_pins); i++) 
    {
      gpio_pin_interrupt_configure(gpio_dev,i, GPIO_INT_DISABLE );
    }
    
    k_delayed_work_init(&wakeup_scan, wakeup_scan_fn);

    wakeup_val = get_wakeup_status();
    atomic_set(&wakeup_state, (atomic_val_t)wakeup_val);

    uint32_t pin_mask = 0;
    for (size_t i = 0; i < ARRAY_SIZE(wakeup_pins); i++) {
            pin_mask |= BIT(wakeup_pins[i]);
    }
    gpio_init_callback(&gpio_cb, wakeup_detected, pin_mask);
    err = gpio_add_callback(gpio_dev, &gpio_cb);

    if (err) {
            printk("Cannot add callback\n");
            return err;
    }
    for (size_t i = 0; i < ARRAY_SIZE(wakeup_pins); i++) 
    {
      gpio_pin_interrupt_configure(gpio_dev,i, GPIO_INT_EDGE_BOTH );
    }

 
    return 0;
}

I used the dk_leds and button routines as an example of how to set it up.  I've chopped out pieces of code and everything works fine unit the final loop where I enable the interrupts to both edges.  But even replacing it with single edge breaks the GPIO reads.  I was hoping someone might have some insight.

Thanks,

[Randall]

OK, figured out my issue.  I was using loop variable instead of the actual array of pin numbers.  Kind of embarrassing.  Would like to close this out as soon as possible.