According to the product specification, the power fail comparator nRF52832 has a threshold tolerance of at most +/-5%. When I configure the power level warning to 1.7V, this would lead to a range of 1.615 - 1.785V. Is that correct?
The maximum brownout reset voltage is specified as 1.7V which is above the 1.615V of the POF. In this case, can be ensured that the POF always triggers the warning before the brownout resets the nRF?
Many thanks in advance.
Best regards, Remo
The answer from our HW engineers is that the POF will trigger before the brownout-reset.
Hi Jared. Thank you very much for the clarification!