Looking for the TWI eDMA example (possibly with PPI)

[MichielSch]

Hi,

I am looking for an example that uses the eDMA with the TWI in the 15.2 SDK on nRF52840.

My idea is to read out an external sensor using the TWI with as little processor involvement as possible. The sensor fills a buffer (this buffer is contained in the sensor) and is able to interrupt the processor when this buffer is filled to a certain level.  It should be possible for this interrupt to start a TWI read action through the PPI that reads the sensor data into a buffer using the eDMA right? Or is this not feasible?

I looked on the devZone and found similar questions but I did not find a specific link to an example using the 15.2 sdk version. I also tried grepping through the sdk but didn't really find anything useful.

Thanks in advance and best regards,

Michiel

[Jørgen Holmefjord]

Hi,

We do not have any specific examples for this use-case, but it should certainly be feasible. You can find detailed instructions on how to setup a repeated transfer and start the transfer over PPI in the Advanced usage section of the driver documentation.

I would recommend you to start out with the TWI Sensor example, and use the GPIOTE and PPI example as reference for the GPIO interrupt and PPI related parts.

Best regards,
Jørgen

[Jørgen Holmefjord]

EasyDMA is used by the driver if it is configured correctly. You select this in your sdk_config.h file by setting TWIx_USE_EASY_DMA to 1, where 'x' is the TWI instance (0 or 1).

Another option is to Migrate nrf_drv to nrfx drivers. You can then use the nrfx_twim driver directly. There is an example showing usage of nrfx_spim in the SDK.

[MichielSch]

Hi,

Will migrating to the nrfx_twi driver also allow me to read more then 255 bytes in one read operation? Because the nrf_drv_twi_rx function only allows for the read length to be an 8bit unsigned integer. So if I would like to read more then 255 bytes and use the eDMA is will have to migrate anyway right?

Or is there a way to avoid migrating to the nrfx drivers for now and still combine the eDMA with TWI reads larger then 255 bytes?

Best regards,

Michiel