Hello everyone,
I'm dealing with mcumgr-cli to exchange commands between a host machine (running Ubuntu 20.04 LTS) and a NRF52833 DK running smp_svr sample. I'm using NCS V1.5.0
In the host machine, I'm using a NRF52840 Dongle running hci_usb sample as an adapter (hci0). I see the .config file opted for using the Softdevice as the Controller side of the stack (CONFIG_BT_LL_SOFTDEVICE=y).
When I run mcumgr --conntype ble --connstring ctlr_name=hci0,peer_name=Zephyr echo hello, the command fails displaying the following message:
The curious thing comes now: if I build the hci_usb sample using Zephyr's BLE Controller Stack (CONFIG_BT_LL_SW_SPLIT=y) and load it in the dongle, then the command executes successfully:
I'm attaching the hci trace for both cases (with hci_usb running on CONFIG_BT_LL_SOFTDEVICE and when running on CONFIG_BT_LL_SW_SPLIT), captured with btmon.
Bluetooth monitor ver 5.53
= Note: Linux version 5.8.0-48-generic (x86_64) 0.365126
= Note: Bluetooth subsystem version 2.22 0.365128
= New Index: 00:00:00:00:00:00 (Primary,USB,hci0) [hci0] 0.365129
= Open Index: 00:00:00:00:00:00 [hci0] 0.365129
= Index Info: 00:00:00:00:00:00 (Nordic Semiconductor ASA) [hci0] 0.365129
@ MGMT Open: bluetoothd (privileged) version 1.17 {0x0001} 0.365130
@ MGMT Open: btmon (privileged) version 1.17 {0x0002} 0.365217
@ RAW Open: mcumgr (privileged) version 2.22 {0x0003} 6.212686
@ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 6.212782
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0001} [hci0] 6.212782
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
= Close Index: 00:00:00:00:00:00 [hci0] 6.212982
= Open Index: 00:00:00:00:00:00 [hci0] 7.390844
< HCI Command: Reset (0x03|0x0003) plen 0 #1 [hci0] 7.391142
> HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 8.393220
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported... (0x04|0x0003) plen 0 #3 [hci0] 8.393370
> HCI Event: Command Complete (0x0e) plen 12 #4 [hci0] 8.395927
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x00
BR/EDR Not Supported
LE Supported (Controller)
< HCI Command: Read Local Version In.. (0x04|0x0001) plen 0 #5 [hci0] 8.396191
> HCI Event: Command Complete (0x0e) plen 12 #6 [hci0] 8.399166
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: Reserved (0x0b) - Revision 4496 (0x1190)
LMP version: Reserved (0x0b) - Subversion 4496 (0x1190)
Manufacturer: Nordic Semiconductor ASA (89)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #7 [hci0] 8.399362
> HCI Event: Command Complete (0x0e) plen 10 #8 [hci0] 8.402190
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
< HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #9 [hci0] 8.402548
> HCI Event: Command Complete (0x0e) plen 7 #10 [hci0] 8.406311
LE Read Buffer Size (0x08|0x0002) ncmd 1
Status: Success (0x00)
Data packet length: 27
Num data packets: 3
< HCI Command: LE Read Local Suppor.. (0x08|0x0003) plen 0 #11 [hci0] 8.406636
> HCI Event: Command Complete (0x0e) plen 12 #12 [hci0] 8.410307
LE Read Local Supported Features (0x08|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xf5 0x49 0x00 0x00 0x00 0x00 0x90 0x11
LE Encryption
Extended Reject Indication
LE Ping
LE Data Packet Length Extension
LL Privacy
Extended Scanner Filter Policies
LE 2M PHY
LE Coded PHY
Channel Selection Algorithm #2
Unknown features (0x1190000000000000)
< HCI Command: LE Read Supported St.. (0x08|0x001c) plen 0 #13 [hci0] 8.410466
> HCI Event: Command Complete (0x0e) plen 12 #14 [hci0] 8.414347
LE Read Supported States (0x08|0x001c) ncmd 1
Status: Success (0x00)
States: 0x119000ff000049ff
Non-connectable Advertising State
Scannable Advertising State
Connectable Advertising State
High Duty Cycle Directed Advertising State
Passive Scanning State
Active Scanning State
Initiating State
and Connection State (Master Role)
Connection State (Slave Role)
Non-connectable Advertising State
and Passive Scanning State
High Duty Cycle Directed Advertising State
and Passive Scanning State
Connectable Advertising State
and Active Scanning State
Connectable Advertising State
and Initiating State
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Initiating State
and Master Role & Slave Role
Low Duty Cycle Directed Advertising State
and Initiating State
and Master Role & Slave Role
Connectable Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
Low Duty Cycle Directed Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
Connectable Advertising State
and Connection State (Slave Role)
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Connection State (Slave Role)
and Slave Role & Slave Role
Unknown states (0x1190000000000000)
< HCI Command: Read Local Supported.. (0x04|0x0002) plen 0 #15 [hci0] 8.414671
> HCI Event: Command Complete (0x0e) plen 68 #16 [hci0] 8.422347
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 62 entries
Disconnect (Octet 0 - Bit 5)
Read Remote Version Information (Octet 2 - Bit 7)
Set Event Mask (Octet 5 - Bit 6)
Reset (Octet 5 - Bit 7)
Read Transmit Power Level (Octet 10 - Bit 2)
Set Controller To Host Flow Control (Octet 10 - Bit 5)
Host Buffer Size (Octet 10 - Bit 6)
Host Number of Completed Packets (Octet 10 - Bit 7)
Read Local Version Information (Octet 14 - Bit 3)
Read Local Supported Features (Octet 14 - Bit 5)
Read BD ADDR (Octet 15 - Bit 1)
Read RSSI (Octet 15 - Bit 5)
Set Event Mask Page 2 (Octet 22 - Bit 2)
LE Set Event Mask (Octet 25 - Bit 0)
LE Read Buffer Size (Octet 25 - Bit 1)
LE Read Local Supported Features (Octet 25 - Bit 2)
LE Set Random Address (Octet 25 - Bit 4)
LE Set Advertising Parameters (Octet 25 - Bit 5)
LE Read Advertising Channel TX Power (Octet 25 - Bit 6)
LE Set Advertising Data (Octet 25 - Bit 7)
LE Set Scan Response Data (Octet 26 - Bit 0)
LE Set Advertise Enable (Octet 26 - Bit 1)
LE Set Scan Parameters (Octet 26 - Bit 2)
LE Set Scan Enable (Octet 26 - Bit 3)
LE Create Connection (Octet 26 - Bit 4)
LE Create Connection Cancel (Octet 26 - Bit 5)
LE Read White List Size (Octet 26 - Bit 6)
LE Clear White List (Octet 26 - Bit 7)
LE Add Device To White List (Octet 27 - Bit 0)
LE Remove Device From White List (Octet 27 - Bit 1)
LE Connection Update (Octet 27 - Bit 2)
LE Set Host Channel Classification (Octet 27 - Bit 3)
LE Read Channel Map (Octet 27 - Bit 4)
LE Read Remote Used Features (Octet 27 - Bit 5)
LE Encrypt (Octet 27 - Bit 6)
LE Rand (Octet 27 - Bit 7)
LE Start Encryption (Octet 28 - Bit 0)
LE Long Term Key Request Reply (Octet 28 - Bit 1)
LE Long Term Key Request Neg Reply (Octet 28 - Bit 2)
LE Read Supported States (Octet 28 - Bit 3)
LE Receiver Test (Octet 28 - Bit 4)
LE Transmitter Test (Octet 28 - Bit 5)
LE Test End (Octet 28 - Bit 6)
Read Authenticated Payload Timeout (Octet 32 - Bit 4)
Write Authenticated Payload Timeout (Octet 32 - Bit 5)
LE Set Data Length (Octet 33 - Bit 6)
LE Read Suggested Default Data Length (Octet 33 - Bit 7)
LE Write Suggested Default Data Length (Octet 34 - Bit 0)
LE Add Device To Resolving List (Octet 34 - Bit 3)
LE Remove Device From Resolving List (Octet 34 - Bit 4)
LE Clear Resolving List (Octet 34 - Bit 5)
LE Read Resolving List Size (Octet 34 - Bit 6)
LE Set Address Resolution Enable (Octet 35 - Bit 1)
LE Set Resolvable Private Address Timeout (Octet 35 - Bit 2)
LE Read Maximum Data Length (Octet 35 - Bit 3)
LE Read PHY (Octet 35 - Bit 4)
LE Set Default PHY (Octet 35 - Bit 5)
LE Set PHY (Octet 35 - Bit 6)
LE Enhanced Receiver Test (Octet 35 - Bit 7)
LE Enhanced Transmitter Test (Octet 36 - Bit 0)
LE Read Transmit Power (Octet 38 - Bit 7)
LE Set Privacy Mode (Octet 39 - Bit 2)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 #17 [hci0] 8.422892
Mask: 0x200080000204e890
Disconnection Complete
Encryption Change
Read Remote Version Information Complete
Command Complete
Command Status
Hardware Error
Number of Completed Packets
Data Buffer Overflow
Encryption Key Refresh Complete
LE Meta
> HCI Event: Command Complete (0x0e) plen 4 #18 [hci0] 8.426282
Set Event Mask (0x03|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #19 [hci0] 8.426445
Mask: 0x0000000000080e5f
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
LE Data Length Change
LE Enhanced Connection Complete
LE Direct Advertising Report
LE PHY Update Complete
LE Channel Selection Algorithm
> HCI Event: Command Complete (0x0e) plen 4 #20 [hci0] 8.428992
LE Set Event Mask (0x08|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Advertising... (0x08|0x0007) plen 0 #21 [hci0] 8.429263
> HCI Event: Command Complete (0x0e) plen 5 #22 [hci0] 8.430980
LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1
Status: Success (0x00)
TX power: 0 dbm (0x00)
< HCI Command: LE Read White List S.. (0x08|0x000f) plen 0 #23 [hci0] 8.431074
> HCI Event: Command Complete (0x0e) plen 5 #24 [hci0] 8.434008
LE Read White List Size (0x08|0x000f) ncmd 1
Status: Success (0x00)
Size: 8
< HCI Command: LE Clear White List (0x08|0x0010) plen 0 #25 [hci0] 8.434255
> HCI Event: Command Complete (0x0e) plen 4 #26 [hci0] 8.437215
LE Clear White List (0x08|0x0010) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Resolving Li.. (0x08|0x002a) plen 0 #27 [hci0] 8.437320
> HCI Event: Command Complete (0x0e) plen 5 #28 [hci0] 8.439936
LE Read Resolving List Size (0x08|0x002a) ncmd 1
Status: Success (0x00)
Size: 8
< HCI Command: LE Clear Resolving L.. (0x08|0x0029) plen 0 #29 [hci0] 8.440123
> HCI Event: Command Complete (0x0e) plen 4 #30 [hci0] 8.443198
LE Clear Resolving List (0x08|0x0029) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Maximum Data.. (0x08|0x002f) plen 0 #31 [hci0] 8.443274
> HCI Event: Command Complete (0x0e) plen 12 #32 [hci0] 8.445806
LE Read Maximum Data Length (0x08|0x002f) ncmd 1
Status: Success (0x00)
Max TX octets: 251
Max TX time: 2704
Max RX octets: 251
Max RX time: 2704
< HCI Command: LE Read Suggested De.. (0x08|0x0023) plen 0 #33 [hci0] 8.445939
> HCI Event: Command Complete (0x0e) plen 8 #34 [hci0] 8.449142
LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1
Status: Success (0x00)
TX octets: 27
TX time: 328
< HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 #35 [hci0] 8.449451
Mask: 0x0000000000800000
Authenticated Payload Timeout Expired
> HCI Event: Command Complete (0x0e) plen 4 #36 [hci0] 8.452162
Set Event Mask Page 2 (0x03|0x0063) ncmd 1
Status: Success (0x00)
< HCI Command: LE Write Suggested D.. (0x08|0x0024) plen 4 #37 [hci0] 8.452227
TX octets: 251
TX time: 2704
> HCI Event: Command Complete (0x0e) plen 4 #38 [hci0] 8.454846
LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Default PHY (0x08|0x0031) plen 3 #39 [hci0] 8.454988
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
> HCI Event: Command Complete (0x0e) plen 4 #40 [hci0] 8.457866
LE Set Default PHY (0x08|0x0031) ncmd 1
Status: Success (0x00)
= Index Info: 00:00:00:00:00:00 (Nordic Semiconductor ASA) [hci0] 8.457967
< HCI Command: LE Set Advertising... (0x08|0x0008) plen 32 #41 [hci0] 8.458058
Length: 6
Flags: 0x04
BR/EDR Not Supported
TX power: 0 dBm
> HCI Event: Command Complete (0x0e) plen 4 #42 [hci0] 8.461142
LE Set Advertising Data (0x08|0x0008) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Respons.. (0x08|0x0009) plen 32 #43 [hci0] 8.461235
Length: 9
Name (complete): ubuntu
> HCI Event: Command Complete (0x0e) plen 4 #44 [hci0] 8.463985
LE Set Scan Response Data (0x08|0x0009) ncmd 1
Status: Success (0x00)
@ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 8.464055
Current settings: 0x00008a01
Powered
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0001} [hci0] 8.464055
Current settings: 0x00008a01
Powered
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 8.464229
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0001} [hci0] 8.464229
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
= Close Index: 00:00:00:00:00:00 [hci0] 8.464238
@ MGMT Event: Index Removed (0x0005) plen 0 {0x0002} [hci0] 8.468755
@ MGMT Event: Index Removed (0x0005) plen 0 {0x0001} [hci0] 8.468755
= Open Index: 00:00:00:00:00:00 [hci0] 8.468782
= Index Info: 00:00:00:00:00:00 (Nordic Semiconductor ASA) [hci0] 8.468783
@ RAW Close: mcumgr {0x0003} 8.468786
@ USER Open: mcumgr (privileged) version 2.22 {0x0003} [hci0] 8.468786
= bluetoothd: Endpoint unregistered: sender=:1.70 path=/MediaEndpo.. 8.469319
= bluetoothd: Endpoint unregistered: sender=:1.70 path=/MediaEndpo.. 8.469325
< HCI Command: Reset (0x03|0x0003) plen 0 #45 [hci0] 8.488972
> HCI Event: Command Complete (0x0e) plen 4 #46 [hci0] 8.493272
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #47 [hci0] 8.494067
> HCI Event: Command Complete (0x0e) plen 10 #48 [hci0] 8.496993
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 #49 [hci0] 8.497274
> HCI Event: Command Status (0x0f) plen 4 #50 [hci0] 8.500051
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Unknown HCI Command (0x01)
< HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #51 [hci0] 8.500456
> HCI Event: Command Complete (0x0e) plen 7 #52 [hci0] 8.502940
LE Read Buffer Size (0x08|0x0002) ncmd 1
Status: Success (0x00)
Data packet length: 27
Num data packets: 3
< HCI Command: LE Read Advertising... (0x08|0x0007) plen 0 #53 [hci0] 8.503312
> HCI Event: Command Complete (0x0e) plen 5 #54 [hci0] 8.506030
LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1
Status: Success (0x00)
TX power: 0 dbm (0x00)
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #55 [hci0] 8.506210
Mask: 0x000000000000001f
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
> HCI Event: Command Complete (0x0e) plen 4 #56 [hci0] 8.508794
LE Set Event Mask (0x08|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 #57 [hci0] 8.509414
Mask: 0x3dbff807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete
Synchronous Connection Complete
Synchronous Connection Changed
Sniff Subrating
Extended Inquiry Result
Encryption Key Refresh Complete
IO Capability Request
IO Capability Request Reply
User Confirmation Request
User Passkey Request
Remote OOB Data Request
Simple Pairing Complete
Link Supervision Timeout Changed
Enhanced Flush Complete
User Passkey Notification
Keypress Notification
Remote Host Supported Features Notification
LE Meta
> HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 8.510802
Set Event Mask (0x03|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: Write LE Host Suppor.. (0x03|0x006d) plen 2 #59 [hci0] 8.511365
Supported: 0x01
Simultaneous: 0x00
> HCI Event: Command Status (0x0f) plen 4 #60 [hci0] 8.512867
Write LE Host Supported (0x03|0x006d) ncmd 1
Status: Unknown HCI Command (0x01)
< HCI Command: LE Write Suggested D.. (0x08|0x0024) plen 4 #61 [hci0] 8.513133
TX octets: 251
TX time: 2120
> HCI Event: Command Complete (0x0e) plen 4 #62 [hci0] 8.516026
LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Advertising... (0x08|0x0006) plen 15 #63 [hci0] 8.516242
Min advertising interval: 20.000 msec (0x0020)
Max advertising interval: 20.000 msec (0x0020)
Type: Connectable undirected - ADV_IND (0x00)
Own address type: Public (0x00)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Channel map: 37, 38, 39 (0x07)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #64 [hci0] 8.518926
LE Set Advertising Parameters (0x08|0x0006) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #65 [hci0] 8.519150
Type: Active (0x01)
Interval: 2.500 msec (0x0004)
Window: 2.500 msec (0x0004)
Own address type: Public (0x00)
Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #66 [hci0] 8.521849
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #67 [hci0] 8.522061
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #68 [hci0] 8.524850
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #69 [hci0] 8.525261
> HCI Event: Command Complete (0x0e) plen 10 #70 [hci0] 8.528032
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ USER Close: mcumgr {0x0003} [hci0] 8.528126
= Close Index: 00:00:00:00:00:00 [hci0] 8.528134
@ MGMT Event: Index Added (0x0004) plen 0 {0x0002} [hci0] 8.533709
@ MGMT Event: Index Added (0x0004) plen 0 {0x0001} [hci0] 8.533709
@ MGMT Command: Read Controller Inf.. (0x0004) plen 0 {0x0001} [hci0] 8.533817
@ MGMT Event: Command Complete (0x0001) plen 283 {0x0001} [hci0] 8.533820
Read Controller Information (0x0004) plen 280
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
Version: Reserved (0x0b)
Manufacturer: Nordic Semiconductor ASA (89)
Supported settings: 0x0001be1b
Powered
Connectable
Discoverable
Bondable
Low Energy
Advertising
Secure Connections
Debug Keys
Privacy
Static Address
PHY Configuration
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
Name: ubuntu
Short name:
@ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci0] 8.534185
UUID: 00000000-0000-0000-0000-000000000000
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 8.534204
Remove UUID (0x0011) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Remove Device (0x0034) plen 7 {0x0001} [hci0] 8.534242
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci0] 8.534257
Remove Device (0x0034) plen 7
Status: Success (0x00)
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Command: Set Static Address (0x002b) plen 6 {0x0001} [hci0] 8.534275
Address: CB:E4:D4:09:74:0C (Static)
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 8.534277
Set Static Address (0x002b) plen 4
Status: Success (0x00)
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 8.534278
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
@ MGMT Command: Set Privacy (0x002f) plen 17 {0x0001} [hci0] 8.534292
Privacy: Disabled (0x00)
Key: 00000000000000000000000000000000
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 8.534293
Set Privacy (0x002f) plen 4
Status: Success (0x00)
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 8.534306
UUID: 00001800-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 8.534308
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 8.534323
UUID: 00001801-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 8.534324
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Read Advertising Fe.. (0x003d) plen 0 {0x0001} [hci0] 8.534338
@ MGMT Event: Command Complete (0x0001) plen 11 {0x0001} [hci0] 8.534339
Read Advertising Features (0x003d) plen 8
Status: Success (0x00)
Flags: 0x0000007f
Switch into Connectable mode
Advertise as Discoverable
Advertise as Limited Discoverable
Add Flags field to Advertising Data
Add TX Power field to Advertising Data
Add Appearance field to Scan Response
Add Local Name in Scan Response
Advertising data length: 31
Scan response length: 31
Max instances: 5
Instances: 0
@ MGMT Command: Set Powered (0x0005) plen 1 {0x0001} [hci0] 8.534352
Powered: Enabled (0x01)
= Open Index: 00:00:00:00:00:00 [hci0] 8.534363
< HCI Command: Reset (0x03|0x0003) plen 0 #71 [hci0] 8.534392
> HCI Event: Command Complete (0x0e) plen 4 #72 [hci0] 8.536785
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported.. (0x04|0x0003) plen 0 #73 [hci0] 8.536823
= bluetoothd: Endpoint registered: sender=:1.70 path=/MediaEndpoin.. 8.537014
= bluetoothd: Endpoint registered: sender=:1.70 path=/MediaEndpoin.. 8.537061
> HCI Event: Command Complete (0x0e) plen 12 #74 [hci0] 8.539788
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x00
BR/EDR Not Supported
LE Supported (Controller)
< HCI Command: Read Local Version I.. (0x04|0x0001) plen 0 #75 [hci0] 8.539894
> HCI Event: Command Complete (0x0e) plen 12 #76 [hci0] 8.542961
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: Reserved (0x0b) - Revision 4496 (0x1190)
LMP version: Reserved (0x0b) - Subversion 4496 (0x1190)
Manufacturer: Nordic Semiconductor ASA (89)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #77 [hci0] 8.543094
> HCI Event: Command Complete (0x0e) plen 10 #78 [hci0] 8.545827
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
< HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #79 [hci0] 8.546024
> HCI Event: Command Complete (0x0e) plen 7 #80 [hci0] 8.547762
LE Read Buffer Size (0x08|0x0002) ncmd 1
Status: Success (0x00)
Data packet length: 27
Num data packets: 3
< HCI Command: LE Read Local Suppor.. (0x08|0x0003) plen 0 #81 [hci0] 8.547850
> HCI Event: Command Complete (0x0e) plen 12 #82 [hci0] 8.549855
LE Read Local Supported Features (0x08|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xf5 0x49 0x00 0x00 0x00 0x00 0x90 0x11
LE Encryption
Extended Reject Indication
LE Ping
LE Data Packet Length Extension
LL Privacy
Extended Scanner Filter Policies
LE 2M PHY
LE Coded PHY
Channel Selection Algorithm #2
Unknown features (0x1190000000000000)
< HCI Command: LE Read Supported St.. (0x08|0x001c) plen 0 #83 [hci0] 8.549958
> HCI Event: Command Complete (0x0e) plen 12 #84 [hci0] 8.553088
LE Read Supported States (0x08|0x001c) ncmd 1
Status: Success (0x00)
States: 0x119000ff000049ff
Non-connectable Advertising State
Scannable Advertising State
Connectable Advertising State
High Duty Cycle Directed Advertising State
Passive Scanning State
Active Scanning State
Initiating State
and Connection State (Master Role)
Connection State (Slave Role)
Non-connectable Advertising State
and Passive Scanning State
High Duty Cycle Directed Advertising State
and Passive Scanning State
Connectable Advertising State
and Active Scanning State
Connectable Advertising State
and Initiating State
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Initiating State
and Master Role & Slave Role
Low Duty Cycle Directed Advertising State
and Initiating State
and Master Role & Slave Role
Connectable Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
Low Duty Cycle Directed Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
Connectable Advertising State
and Connection State (Slave Role)
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Connection State (Slave Role)
and Slave Role & Slave Role
Unknown states (0x1190000000000000)
< HCI Command: Read Local Supported.. (0x04|0x0002) plen 0 #85 [hci0] 8.553199
> HCI Event: Command Complete (0x0e) plen 68 #86 [hci0] 8.558973
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 62 entries
Disconnect (Octet 0 - Bit 5)
Read Remote Version Information (Octet 2 - Bit 7)
Set Event Mask (Octet 5 - Bit 6)
Reset (Octet 5 - Bit 7)
Read Transmit Power Level (Octet 10 - Bit 2)
Set Controller To Host Flow Control (Octet 10 - Bit 5)
Host Buffer Size (Octet 10 - Bit 6)
Host Number of Completed Packets (Octet 10 - Bit 7)
Read Local Version Information (Octet 14 - Bit 3)
Read Local Supported Features (Octet 14 - Bit 5)
Read BD ADDR (Octet 15 - Bit 1)
Read RSSI (Octet 15 - Bit 5)
Set Event Mask Page 2 (Octet 22 - Bit 2)
LE Set Event Mask (Octet 25 - Bit 0)
LE Read Buffer Size (Octet 25 - Bit 1)
LE Read Local Supported Features (Octet 25 - Bit 2)
LE Set Random Address (Octet 25 - Bit 4)
LE Set Advertising Parameters (Octet 25 - Bit 5)
LE Read Advertising Channel TX Power (Octet 25 - Bit 6)
LE Set Advertising Data (Octet 25 - Bit 7)
LE Set Scan Response Data (Octet 26 - Bit 0)
LE Set Advertise Enable (Octet 26 - Bit 1)
LE Set Scan Parameters (Octet 26 - Bit 2)
LE Set Scan Enable (Octet 26 - Bit 3)
LE Create Connection (Octet 26 - Bit 4)
LE Create Connection Cancel (Octet 26 - Bit 5)
LE Read White List Size (Octet 26 - Bit 6)
LE Clear White List (Octet 26 - Bit 7)
LE Add Device To White List (Octet 27 - Bit 0)
LE Remove Device From White List (Octet 27 - Bit 1)
LE Connection Update (Octet 27 - Bit 2)
LE Set Host Channel Classification (Octet 27 - Bit 3)
LE Read Channel Map (Octet 27 - Bit 4)
LE Read Remote Used Features (Octet 27 - Bit 5)
LE Encrypt (Octet 27 - Bit 6)
LE Rand (Octet 27 - Bit 7)
LE Start Encryption (Octet 28 - Bit 0)
LE Long Term Key Request Reply (Octet 28 - Bit 1)
LE Long Term Key Request Neg Reply (Octet 28 - Bit 2)
LE Read Supported States (Octet 28 - Bit 3)
LE Receiver Test (Octet 28 - Bit 4)
LE Transmitter Test (Octet 28 - Bit 5)
LE Test End (Octet 28 - Bit 6)
Read Authenticated Payload Timeout (Octet 32 - Bit 4)
Write Authenticated Payload Timeout (Octet 32 - Bit 5)
LE Set Data Length (Octet 33 - Bit 6)
LE Read Suggested Default Data Length (Octet 33 - Bit 7)
LE Write Suggested Default Data Length (Octet 34 - Bit 0)
LE Add Device To Resolving List (Octet 34 - Bit 3)
LE Remove Device From Resolving List (Octet 34 - Bit 4)
LE Clear Resolving List (Octet 34 - Bit 5)
LE Read Resolving List Size (Octet 34 - Bit 6)
LE Set Address Resolution Enable (Octet 35 - Bit 1)
LE Set Resolvable Private Address Timeout (Octet 35 - Bit 2)
LE Read Maximum Data Length (Octet 35 - Bit 3)
LE Read PHY (Octet 35 - Bit 4)
LE Set Default PHY (Octet 35 - Bit 5)
LE Set PHY (Octet 35 - Bit 6)
LE Enhanced Receiver Test (Octet 35 - Bit 7)
LE Enhanced Transmitter Test (Octet 36 - Bit 0)
LE Read Transmit Power (Octet 38 - Bit 7)
LE Set Privacy Mode (Octet 39 - Bit 2)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 #87 [hci0] 8.559078
Mask: 0x200080000204e890
Disconnection Complete
Encryption Change
Read Remote Version Information Complete
Command Complete
Command Status
Hardware Error
Number of Completed Packets
Data Buffer Overflow
Encryption Key Refresh Complete
LE Meta
> HCI Event: Command Complete (0x0e) plen 4 #88 [hci0] 8.561809
Set Event Mask (0x03|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #89 [hci0] 8.561959
Mask: 0x0000000000080e5f
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
LE Data Length Change
LE Enhanced Connection Complete
LE Direct Advertising Report
LE PHY Update Complete
LE Channel Selection Algorithm
> HCI Event: Command Complete (0x0e) plen 4 #90 [hci0] 8.563950
LE Set Event Mask (0x08|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Advertising... (0x08|0x0007) plen 0 #91 [hci0] 8.564038
> HCI Event: Command Complete (0x0e) plen 5 #92 [hci0] 8.566948
LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1
Status: Success (0x00)
TX power: 0 dbm (0x00)
< HCI Command: LE Read White List S.. (0x08|0x000f) plen 0 #93 [hci0] 8.567031
> HCI Event: Command Complete (0x0e) plen 5 #94 [hci0] 8.569845
LE Read White List Size (0x08|0x000f) ncmd 1
Status: Success (0x00)
Size: 8
< HCI Command: LE Clear White List (0x08|0x0010) plen 0 #95 [hci0] 8.569940
> HCI Event: Command Complete (0x0e) plen 4 #96 [hci0] 8.571740
LE Clear White List (0x08|0x0010) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Resolving Li.. (0x08|0x002a) plen 0 #97 [hci0] 8.571839
> HCI Event: Command Complete (0x0e) plen 5 #98 [hci0] 8.574822
LE Read Resolving List Size (0x08|0x002a) ncmd 1
Status: Success (0x00)
Size: 8
< HCI Command: LE Clear Resolving L.. (0x08|0x0029) plen 0 #99 [hci0] 8.574918
> HCI Event: Command Complete (0x0e) plen 4 #100 [hci0] 8.577950
LE Clear Resolving List (0x08|0x0029) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #101 [hci0] 8.578047
> HCI Event: Command Complete (0x0e) plen 12 #102 [hci0] 8.580733
LE Read Maximum Data Length (0x08|0x002f) ncmd 1
Status: Success (0x00)
Max TX octets: 251
Max TX time: 2704
Max RX octets: 251
Max RX time: 2704
< HCI Command: LE Read Suggested D.. (0x08|0x0023) plen 0 #103 [hci0] 8.580828
> HCI Event: Command Complete (0x0e) plen 8 #104 [hci0] 8.583889
LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1
Status: Success (0x00)
TX octets: 27
TX time: 328
< HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 #105 [hci0] 8.583984
Mask: 0x0000000000800000
Authenticated Payload Timeout Expired
> HCI Event: Command Complete (0x0e) plen 4 #106 [hci0] 8.586982
Set Event Mask Page 2 (0x03|0x0063) ncmd 1
Status: Success (0x00)
< HCI Command: LE Write Suggested... (0x08|0x0024) plen 4 #107 [hci0] 8.587065
TX octets: 251
TX time: 2704
> HCI Event: Command Complete (0x0e) plen 4 #108 [hci0] 8.589746
LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Default PHY (0x08|0x0031) plen 3 #109 [hci0] 8.589831
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
> HCI Event: Command Complete (0x0e) plen 4 #110 [hci0] 8.591937
LE Set Default PHY (0x08|0x0031) ncmd 1
Status: Success (0x00)
= Index Info: 00:00:00:00:00:00 (Nordic Semiconductor ASA) [hci0] 8.592026
< HCI Command: LE Set Advertising.. (0x08|0x0008) plen 32 #111 [hci0] 8.592062
Length: 6
Flags: 0x04
BR/EDR Not Supported
TX power: 0 dBm
> HCI Event: Command Complete (0x0e) plen 4 #112 [hci0] 8.594879
LE Set Advertising Data (0x08|0x0008) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Respon.. (0x08|0x0009) plen 32 #113 [hci0] 8.594981
Length: 9
Name (complete): ubuntu
> HCI Event: Command Complete (0x0e) plen 4 #114 [hci0] 8.597969
LE Set Scan Response Data (0x08|0x0009) ncmd 1
Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 8.598090
Set Powered (0x0005) plen 4
Status: Success (0x00)
Current settings: 0x00008a01
Powered
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 8.598097
Current settings: 0x00008a01
Powered
Low Energy
Secure Connections
Static Address
@ MGMT Command: Set Local Name (0x000f) plen 260 {0x0001} [hci0] 8.598190
Name: ubuntu
Short name:
@ MGMT Event: Command Complete (0x0001) plen 263 {0x0001} [hci0] 8.598207
Set Local Name (0x000f) plen 260
Status: Success (0x00)
Name: ubuntu
Short name:
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 8.598232
UUID: 0000110e-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 8.598234
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 8.598253
UUID: 0000110c-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 8.598254
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 8.598271
UUID: 00001112-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 8.598272
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 8.598288
UUID: 00001108-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 8.598289
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Unblock Device (0x0027) plen 7 {0x0001} [hci0] 8.598306
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Event: Device Unblocked (0x0015) plen 7 {0x0002} [hci0] 8.598307
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci0] 8.598309
Unblock Device (0x0027) plen 7
Status: Success (0x00)
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Command: Load Long Term Keys (0x0013) plen 2 {0x0001} [hci0] 8.598324
Keys: 0
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 8.598326
Load Long Term Keys (0x0013) plen 0
Status: Success (0x00)
@ MGMT Command: Load Identity Resol.. (0x0030) plen 2 {0x0001} [hci0] 8.598364
Keys: 0
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 8.598366
Load Identity Resolving Keys (0x0030) plen 0
Status: Success (0x00)
@ MGMT Command: Load Connection Par.. (0x0035) plen 2 {0x0001} [hci0] 8.598382
Parameters: 0
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 8.598383
Load Connection Parameters (0x0035) plen 0
Status: Success (0x00)
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 8.598398
UUID: 00001200-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 8.598399
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Set Device ID (0x0028) plen 8 {0x0001} [hci0] 8.598433
Device ID: USB Implementer's Forum assigned (0x0002)
Vendor: Linux Foundation (0x1d6b)
Product: 0x0246
Version: 5.3.5 (0x0535)
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 8.598435
Set Device ID (0x0028) plen 0
Status: Success (0x00)
@ MGMT Command: Set Local Name (0x000f) plen 260 {0x0001} [hci0] 8.598450
Name: ubuntu
Short name:
@ MGMT Event: Command Complete (0x0001) plen 263 {0x0001} [hci0] 8.598452
Set Local Name (0x000f) plen 260
Status: Success (0x00)
Name: ubuntu
Short name:
@ MGMT Command: Unknown (0x0046) plen 36 {0x0001} [hci0] 8.598467
02 00 01 bf 01 fb 9d 4e f3 bc 36 d8 74 f5 39 41 .......N..6.t.9A
38 68 4c 02 a5 99 ba e4 e1 7c a6 18 22 8e 07 56 8hL......|.."..V
b4 e8 5f 01 .._.
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 8.598472
Unknown (0x0046) plen 0
Status: Success (0x00)
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 8.598488
UUID: 0000110b-0000-1000-8000-00805f9b34fb
Service class: 0x04
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 8.598489
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 8.598505
UUID: 0000110a-0000-1000-8000-00805f9b34fb
Service class: 0x08
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 8.598506
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Set Powered (0x0005) plen 1 {0x0001} [hci0] 8.598522
Powered: Enabled (0x01)
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 8.598523
Set Powered (0x00
Bluetooth monitor ver 5.53
= Note: Linux version 5.8.0-48-generic (x86_64) 0.099563
= Note: Bluetooth subsystem version 2.22 0.099565
= New Index: 00:00:00:00:00:00 (Primary,USB,hci0) [hci0] 0.099566
= Open Index: 00:00:00:00:00:00 [hci0] 0.099566
= Index Info: 00:00:00:00:00:00 (The Linux Foundation) [hci0] 0.099567
@ MGMT Open: bluetoothd (privileged) version 1.17 {0x0001} 0.099568
@ MGMT Open: btmon (privileged) version 1.17 {0x0002} 0.099676
@ RAW Open: mcumgr (privileged) version 2.22 {0x0003} 43.082113
@ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 43.082139
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0001} [hci0] 43.082139
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
= Close Index: 00:00:00:00:00:00 [hci0] 43.082443
= Open Index: 00:00:00:00:00:00 [hci0] 44.099503
< HCI Command: Reset (0x03|0x0003) plen 0 #1 [hci0] 44.099839
> HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 44.453746
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Supported.. (0x04|0x0003) plen 0 #3 [hci0] 44.454076
> HCI Event: Command Complete (0x0e) plen 12 #4 [hci0] 44.456606
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x00
BR/EDR Not Supported
LE Supported (Controller)
< HCI Command: Read Local Version I.. (0x04|0x0001) plen 0 #5 [hci0] 44.456751
> HCI Event: Command Complete (0x0e) plen 12 #6 [hci0] 44.459527
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: Reserved (0x0b) - Revision 0 (0x0000)
LMP version: Reserved (0x0b) - Subversion 65535 (0xffff)
Manufacturer: The Linux Foundation (1521)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #7 [hci0] 44.459816
> HCI Event: Command Complete (0x0e) plen 10 #8 [hci0] 44.462551
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
< HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #9 [hci0] 44.462663
> HCI Event: Command Complete (0x0e) plen 7 #10 [hci0] 44.465750
LE Read Buffer Size (0x08|0x0002) ncmd 1
Status: Success (0x00)
Data packet length: 27
Num data packets: 7
< HCI Command: LE Read Local Suppo.. (0x08|0x0003) plen 0 #11 [hci0] 44.465922
> HCI Event: Command Complete (0x0e) plen 12 #12 [hci0] 44.469513
LE Read Local Supported Features (0x08|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0x49 0x01 0x00 0x00 0x00 0x00 0x00
LE Encryption
Connection Parameter Request Procedure
Extended Reject Indication
Slave-initiated Features Exchange
LE Ping
LE Data Packet Length Extension
LL Privacy
Extended Scanner Filter Policies
LE 2M PHY
LE Coded PHY
Channel Selection Algorithm #2
Minimum Number of Used Channels Procedure
< HCI Command: LE Read Supported S.. (0x08|0x001c) plen 0 #13 [hci0] 44.469856
> HCI Event: Command Complete (0x0e) plen 12 #14 [hci0] 44.472388
LE Read Supported States (0x08|0x001c) ncmd 1
Status: Success (0x00)
States: 0x000003ffff3fffff
Non-connectable Advertising State
Scannable Advertising State
Connectable Advertising State
High Duty Cycle Directed Advertising State
Passive Scanning State
Active Scanning State
Initiating State
and Connection State (Master Role)
Connection State (Slave Role)
Non-connectable Advertising State
and Passive Scanning State
Scannable Advertising State
and Passive Scanning State
Connectable Advertising State
and Passive Scanning State
High Duty Cycle Directed Advertising State
and Passive Scanning State
Non-connectable Advertising State
and Active Scanning State
Scannable Advertising State
and Active Scanning State
Connectable Advertising State
and Active Scanning State
High Duty Cycle Directed Advertising State
and Active Scanning State
Non-connectable Advertising State
and Initiating State
Scannable Advertising State
and Initiating State
Non-connectable Advertising State
and Connection State (Master Role)
Scannable Advertising State
and Connection State (Master Role)
Non-connectable Advertising State
and Connection State (Slave Role)
Scannable Advertising State
and Connection State (Slave Role)
Passive Scanning State
and Connection State (Master Role)
Active Scanning State
and Connection State (Master Role)
Passive Scanning State
and Connection State (Slave Role)
Active Scanning State
and Connection State (Slave Role)
Initiating State
and Connection State (Master Role)
and Master Role & Master Role
Low Duty Cycle Directed Advertising State
Low Duty Cycle Directed Advertising State
and Passive Scanning State
Low Duty Cycle Directed Advertising State
and Active Scanning State
Connectable Advertising State
and Initiating State
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Initiating State
and Master Role & Slave Role
Low Duty Cycle Directed Advertising State
and Initiating State
and Master Role & Slave Role
Connectable Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
Low Duty Cycle Directed Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
Connectable Advertising State
and Connection State (Slave Role)
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Connection State (Slave Role)
and Slave Role & Slave Role
Low Duty Cycle Directed Advertising State
and Connection State (Slave Role)
and Slave Role & Slave Role
Initiating State
and Connection State (Slave Role)
and Master Role & Slave Role
< HCI Command: Read Local Supporte.. (0x04|0x0002) plen 0 #15 [hci0] 44.472642
> HCI Event: Command Complete (0x0e) plen 68 #16 [hci0] 44.476814
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 61 entries
Disconnect (Octet 0 - Bit 5)
Read Remote Version Information (Octet 2 - Bit 7)
Set Event Mask (Octet 5 - Bit 6)
Reset (Octet 5 - Bit 7)
Read Transmit Power Level (Octet 10 - Bit 2)
Set Controller To Host Flow Control (Octet 10 - Bit 5)
Host Buffer Size (Octet 10 - Bit 6)
Host Number of Completed Packets (Octet 10 - Bit 7)
Read Local Version Information (Octet 14 - Bit 3)
Read Local Supported Features (Octet 14 - Bit 5)
Read BD ADDR (Octet 15 - Bit 1)
Read RSSI (Octet 15 - Bit 5)
Set Event Mask Page 2 (Octet 22 - Bit 2)
LE Set Event Mask (Octet 25 - Bit 0)
LE Read Buffer Size (Octet 25 - Bit 1)
LE Read Local Supported Features (Octet 25 - Bit 2)
LE Set Random Address (Octet 25 - Bit 4)
LE Set Advertising Parameters (Octet 25 - Bit 5)
LE Read Advertising Channel TX Power (Octet 25 - Bit 6)
LE Set Advertising Data (Octet 25 - Bit 7)
LE Set Scan Response Data (Octet 26 - Bit 0)
LE Set Advertise Enable (Octet 26 - Bit 1)
LE Set Scan Parameters (Octet 26 - Bit 2)
LE Set Scan Enable (Octet 26 - Bit 3)
LE Create Connection (Octet 26 - Bit 4)
LE Create Connection Cancel (Octet 26 - Bit 5)
LE Read White List Size (Octet 26 - Bit 6)
LE Clear White List (Octet 26 - Bit 7)
LE Add Device To White List (Octet 27 - Bit 0)
LE Remove Device From White List (Octet 27 - Bit 1)
LE Connection Update (Octet 27 - Bit 2)
LE Set Host Channel Classification (Octet 27 - Bit 3)
LE Read Channel Map (Octet 27 - Bit 4)
LE Read Remote Used Features (Octet 27 - Bit 5)
LE Encrypt (Octet 27 - Bit 6)
LE Rand (Octet 27 - Bit 7)
LE Start Encryption (Octet 28 - Bit 0)
LE Long Term Key Request Reply (Octet 28 - Bit 1)
LE Long Term Key Request Neg Reply (Octet 28 - Bit 2)
LE Read Supported States (Octet 28 - Bit 3)
Read Authenticated Payload Timeout (Octet 32 - Bit 4)
Write Authenticated Payload Timeout (Octet 32 - Bit 5)
LE Remote Connection Parameter Request Reply (Octet 33 - Bit 4)
LE Remote Connection Parameter Request Negative Reply (Octet 33 - Bit 5)
LE Set Data Length (Octet 33 - Bit 6)
LE Read Suggested Default Data Length (Octet 33 - Bit 7)
LE Write Suggested Default Data Length (Octet 34 - Bit 0)
LE Add Device To Resolving List (Octet 34 - Bit 3)
LE Remove Device From Resolving List (Octet 34 - Bit 4)
LE Clear Resolving List (Octet 34 - Bit 5)
LE Read Resolving List Size (Octet 34 - Bit 6)
LE Read Peer Resolvable Address (Octet 34 - Bit 7)
LE Read Local Resolvable Address (Octet 35 - Bit 0)
LE Set Address Resolution Enable (Octet 35 - Bit 1)
LE Set Resolvable Private Address Timeout (Octet 35 - Bit 2)
LE Read Maximum Data Length (Octet 35 - Bit 3)
LE Read PHY (Octet 35 - Bit 4)
LE Set Default PHY (Octet 35 - Bit 5)
LE Set PHY (Octet 35 - Bit 6)
LE Read Transmit Power (Octet 38 - Bit 7)
LE Set Privacy Mode (Octet 39 - Bit 2)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 #17 [hci0] 44.477503
Mask: 0x200080000204e890
Disconnection Complete
Encryption Change
Read Remote Version Information Complete
Command Complete
Command Status
Hardware Error
Number of Completed Packets
Data Buffer Overflow
Encryption Key Refresh Complete
LE Meta
> HCI Event: Command Complete (0x0e) plen 4 #18 [hci0] 44.479546
Set Event Mask (0x03|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #19 [hci0] 44.479812
Mask: 0x0000000000080e7f
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
LE Remote Connection Parameter Request
LE Data Length Change
LE Enhanced Connection Complete
LE Direct Advertising Report
LE PHY Update Complete
LE Channel Selection Algorithm
> HCI Event: Command Complete (0x0e) plen 4 #20 [hci0] 44.482754
LE Set Event Mask (0x08|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Advertising.. (0x08|0x0007) plen 0 #21 [hci0] 44.482899
> HCI Event: Command Complete (0x0e) plen 5 #22 [hci0] 44.486427
LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1
Status: Success (0x00)
TX power: 0 dbm (0x00)
< HCI Command: LE Read White List... (0x08|0x000f) plen 0 #23 [hci0] 44.486845
> HCI Event: Command Complete (0x0e) plen 5 #24 [hci0] 44.489437
LE Read White List Size (0x08|0x000f) ncmd 1
Status: Success (0x00)
Size: 8
< HCI Command: LE Clear White List (0x08|0x0010) plen 0 #25 [hci0] 44.489542
> HCI Event: Command Complete (0x0e) plen 4 #26 [hci0] 44.492436
LE Clear White List (0x08|0x0010) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #27 [hci0] 44.492563
> HCI Event: Command Complete (0x0e) plen 5 #28 [hci0] 44.495450
LE Read Resolving List Size (0x08|0x002a) ncmd 1
Status: Success (0x00)
Size: 8
< HCI Command: LE Clear Resolving... (0x08|0x0029) plen 0 #29 [hci0] 44.495546
> HCI Event: Command Complete (0x0e) plen 4 #30 [hci0] 44.498425
LE Clear Resolving List (0x08|0x0029) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #31 [hci0] 44.498578
> HCI Event: Command Complete (0x0e) plen 12 #32 [hci0] 44.501278
LE Read Maximum Data Length (0x08|0x002f) ncmd 1
Status: Success (0x00)
Max TX octets: 27
Max TX time: 2704
Max RX octets: 27
Max RX time: 2704
< HCI Command: LE Read Suggested D.. (0x08|0x0023) plen 0 #33 [hci0] 44.501349
> HCI Event: Command Complete (0x0e) plen 8 #34 [hci0] 44.504257
LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1
Status: Success (0x00)
TX octets: 27
TX time: 328
< HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 #35 [hci0] 44.504407
Mask: 0x0000000000800000
Authenticated Payload Timeout Expired
> HCI Event: Command Complete (0x0e) plen 4 #36 [hci0] 44.507469
Set Event Mask Page 2 (0x03|0x0063) ncmd 1
Status: Success (0x00)
< HCI Command: LE Write Suggested... (0x08|0x0024) plen 4 #37 [hci0] 44.507658
TX octets: 27
TX time: 2704
> HCI Event: Command Complete (0x0e) plen 4 #38 [hci0] 44.510560
LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Default PHY (0x08|0x0031) plen 3 #39 [hci0] 44.510623
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
> HCI Event: Command Complete (0x0e) plen 4 #40 [hci0] 44.513548
LE Set Default PHY (0x08|0x0031) ncmd 1
Status: Success (0x00)
= Index Info: 00:00:00:00:00:00 (The Linux Foundation) [hci0] 44.513735
< HCI Command: LE Set Advertising.. (0x08|0x0008) plen 32 #41 [hci0] 44.513823
Length: 6
Flags: 0x04
BR/EDR Not Supported
TX power: 0 dBm
> HCI Event: Command Complete (0x0e) plen 4 #42 [hci0] 44.516330
LE Set Advertising Data (0x08|0x0008) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Respon.. (0x08|0x0009) plen 32 #43 [hci0] 44.516515
Length: 9
Name (complete): ubuntu
> HCI Event: Command Complete (0x0e) plen 4 #44 [hci0] 44.519532
LE Set Scan Response Data (0x08|0x0009) ncmd 1
Status: Success (0x00)
@ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 44.519626
Current settings: 0x00008a01
Powered
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0001} [hci0] 44.519626
Current settings: 0x00008a01
Powered
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 44.519712
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0001} [hci0] 44.519712
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
= Close Index: 00:00:00:00:00:00 [hci0] 44.519732
@ MGMT Event: Index Removed (0x0005) plen 0 {0x0002} [hci0] 44.525028
@ MGMT Event: Index Removed (0x0005) plen 0 {0x0001} [hci0] 44.525028
= Open Index: 00:00:00:00:00:00 [hci0] 44.525056
= Index Info: 00:00:00:00:00:00 (The Linux Foundation) [hci0] 44.525057
@ RAW Close: mcumgr {0x0003} 44.525059
@ USER Open: mcumgr (privileged) version 2.22 {0x0003} [hci0] 44.525060
= bluetoothd: Endpoint unregistered: sender=:1.70 path=/MediaEndp.. 44.527072
= bluetoothd: Endpoint unregistered: sender=:1.70 path=/MediaEndp.. 44.527083
< HCI Command: Reset (0x03|0x0003) plen 0 #45 [hci0] 44.552076
> HCI Event: Command Complete (0x0e) plen 4 #46 [hci0] 44.554643
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #47 [hci0] 44.554920
> HCI Event: Command Complete (0x0e) plen 10 #48 [hci0] 44.557626
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 #49 [hci0] 44.557812
> HCI Event: Command Status (0x0f) plen 4 #50 [hci0] 44.561584
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Unknown HCI Command (0x01)
< HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #51 [hci0] 44.561918
> HCI Event: Command Complete (0x0e) plen 7 #52 [hci0] 44.564580
LE Read Buffer Size (0x08|0x0002) ncmd 1
Status: Success (0x00)
Data packet length: 27
Num data packets: 7
< HCI Command: LE Read Advertising.. (0x08|0x0007) plen 0 #53 [hci0] 44.564744
> HCI Event: Command Complete (0x0e) plen 5 #54 [hci0] 44.567580
LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1
Status: Success (0x00)
TX power: 0 dbm (0x00)
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #55 [hci0] 44.568292
Mask: 0x000000000000001f
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
> HCI Event: Command Complete (0x0e) plen 4 #56 [hci0] 44.570230
LE Set Event Mask (0x08|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 #57 [hci0] 44.570735
Mask: 0x3dbff807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete
Synchronous Connection Complete
Synchronous Connection Changed
Sniff Subrating
Extended Inquiry Result
Encryption Key Refresh Complete
IO Capability Request
IO Capability Request Reply
User Confirmation Request
User Passkey Request
Remote OOB Data Request
Simple Pairing Complete
Link Supervision Timeout Changed
Enhanced Flush Complete
User Passkey Notification
Keypress Notification
Remote Host Supported Features Notification
LE Meta
> HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 44.574431
Set Event Mask (0x03|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: Write LE Host Suppo.. (0x03|0x006d) plen 2 #59 [hci0] 44.574630
Supported: 0x01
Simultaneous: 0x00
> HCI Event: Command Status (0x0f) plen 4 #60 [hci0] 44.576253
Write LE Host Supported (0x03|0x006d) ncmd 1
Status: Unknown HCI Command (0x01)
< HCI Command: LE Write Suggested... (0x08|0x0024) plen 4 #61 [hci0] 44.576606
TX octets: 251
TX time: 2120
> HCI Event: Command Complete (0x0e) plen 4 #62 [hci0] 44.579389
LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Advertising.. (0x08|0x0006) plen 15 #63 [hci0] 44.579602
Min advertising interval: 20.000 msec (0x0020)
Max advertising interval: 20.000 msec (0x0020)
Type: Connectable undirected - ADV_IND (0x00)
Own address type: Public (0x00)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Channel map: 37, 38, 39 (0x07)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #64 [hci0] 44.582216
LE Set Advertising Parameters (0x08|0x0006) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Paramet.. (0x08|0x000b) plen 7 #65 [hci0] 44.582392
Type: Active (0x01)
Interval: 2.500 msec (0x0004)
Window: 2.500 msec (0x0004)
Own address type: Public (0x00)
Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #66 [hci0] 44.584188
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #67 [hci0] 44.584579
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #68 [hci0] 44.587406
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 43 #69 [hci0] 44.620322
LE Advertising Report (0x02)
Num reports: 1
Event type: Non connectable undirected - ADV_NONCONN_IND (0x03)
Address type: Random (0x01)
Address: 62:38:53:3D:F0:BE (Resolvable)
Data length: 31
Company: Microsoft (6)
Data: 01092002e76fd972af54e6a1cd8a8852b355346b990d911abd5d4a
RSSI: -40 dBm (0xd8)
> HCI Event: LE Meta Event (0x3e) plen 29 #70 [hci0] 44.623657
LE Advertising Report (0x02)
Num reports: 1
Event type: Connectable undirected - ADV_IND (0x00)
Address type: Random (0x01)
Address: 63:F9:B1:A7:EC:08 (Resolvable)
Data length: 17
Flags: 0x1a
LE General Discoverable Mode
Simultaneous LE and BR/EDR (Controller)
Simultaneous LE and BR/EDR (Host)
TX power: 7 dBm
Company: Apple, Inc. (76)
Type: Unknown (16)
Data: 231cebc6e4
RSSI: -73 dBm (0xb7)
> HCI Event: LE Meta Event (0x3e) plen 12 #71 [hci0] 44.626327
LE Advertising Report (0x02)
Num reports: 1
Event type: Scan response - SCAN_RSP (0x04)
Address type: Random (0x01)
Address: 63:F9:B1:A7:EC:08 (Resolvable)
Data length: 0
RSSI: -73 dBm (0xb7)
> HCI Event: LE Meta Event (0x3e) plen 29 #72 [hci0] 44.629301
LE Advertising Report (0x02)
Num reports: 1
Event type: Connectable undirected - ADV_IND (0x00)
Address type: Public (0x00)
Address: 90:DD:5D:DB:6E:64 (Apple, Inc.)
Data length: 17
Flags: 0x1a
LE General Discoverable Mode
Simultaneous LE and BR/EDR (Controller)
Simultaneous LE and BR/EDR (Host)
TX power: 12 dBm
Company: Apple, Inc. (76)
Type: Unknown (16)
Data: 0110f06f60
RSSI: -68 dBm (0xbc)
> HCI Event: LE Meta Event (0x3e) plen 12 #73 [hci0] 44.632290
LE Advertising Report (0x02)
Num reports: 1
Event type: Scan response - SCAN_RSP (0x04)
Address type: Public (0x00)
Address: 90:DD:5D:DB:6E:64 (Apple, Inc.)
Data length: 0
RSSI: -68 dBm (0xbc)
> HCI Event: LE Meta Event (0x3e) plen 27 #74 [hci0] 44.710620
LE Advertising Report (0x02)
Num reports: 1
Event type: Non connectable undirected - ADV_NONCONN_IND (0x03)
Address type: Random (0x01)
Address: 13:82:F8:75:40:4C (Non-Resolvable)
Data length: 15
Flags: 0x1a
LE General Discoverable Mode
Simultaneous LE and BR/EDR (Controller)
Simultaneous LE and BR/EDR (Host)
Company: Apple, Inc. (76)
Type: Apple TV (9)
Data: 0349c0a8561d
RSSI: -67 dBm (0xbd)
> HCI Event: LE Meta Event (0x3e) plen 40 #75 [hci0] 44.783485
LE Advertising Report (0x02)
Num reports: 1
Event type: Scannable undirected - ADV_SCAN_IND (0x02)
Address type: Random (0x01)
Address: 55:AE:53:5D:DE:22 (Resolvable)
Data length: 28
16-bit Service UUIDs (complete): 1 entry
Google (0xfe9f)
Service Data (UUID 0xfe9f): 024f78597a4143436a554963000001787598041f
RSSI: -67 dBm (0xbd)
> HCI Event: LE Meta Event (0x3e) plen 29 #76 [hci0] 44.786555
LE Advertising Report (0x02)
Num reports: 1
Event type: Connectable undirected - ADV_IND (0x00)
Address type: Random (0x01)
Address: 7B:07:68:85:06:87 (Resolvable)
Data length: 17
Flags: 0x1a
LE General Discoverable Mode
Simultaneous LE and BR/EDR (Controller)
Simultaneous LE and BR/EDR (Host)
TX power: 12 dBm
Company: Apple, Inc. (76)
Type: Unknown (16)
Data: 0c1805108b
RSSI: -75 dBm (0xb5)
> HCI Event: LE Meta Event (0x3e) plen 33 #77 [hci0] 44.837737
LE Advertising Report (0x02)
Num reports: 1
Event type: Connectable undirected - ADV_IND (0x00)
Address type: Random (0x01)
Address: FC:E0:55:86:7E:FB (Static)
Data length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (complete): 1 entry
Vendor specific (8d53dc1d-1db7-4cd3-868b-8a527460aa84)
RSSI: -46 dBm (0xd2)
> HCI Event: LE Meta Event (0x3e) plen 20 #78 [hci0] 44.839601
LE Advertising Report (0x02)
Num reports: 1
Event type: Scan response - SCAN_RSP (0x04)
Address type: Random (0x01)
Address: FC:E0:55:86:7E:FB (Static)
Data length: 8
Name (complete): Zephyr
RSSI: -45 dBm (0xd3)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #79 [hci0] 44.840239
Scanning: Disabled (0x00)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #80 [hci0] 44.842511
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
< HCI Command: LE Create Connection (0x08|0x000d) plen 25 #81 [hci0] 44.843532
Scan interval: 10.000 msec (0x0010)
Scan window: 10.000 msec (0x0010)
Filter policy: White list is not used (0x00)
Peer address type: Random (0x01)
Peer address: FC:E0:55:86:7E:FB (Static)
Own address type: Public (0x00)
Min connection interval: 7.50 msec (0x0006)
Max connection interval: 7.50 msec (0x0006)
Connection latency: 0 (0x0000)
Supervision timeout: 720 msec (0x0048)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)
> HCI Event: Command Status (0x0f) plen 4 #82 [hci0] 44.846437
LE Create Connection (0x08|0x000d) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 19 #83 [hci0] 44.942620
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 0
Role: Master (0x00)
Peer address type: Random (0x01)
Peer address: FC:E0:55:86:7E:FB (Static)
Connection interval: 7.50 msec (0x0006)
Connection latency: 0 (0x0000)
Supervision timeout: 720 msec (0x0048)
Master clock accuracy: 0x07
< ACL Data TX: Handle 0 flags 0x00 dlen 7 #84 [hci0] 44.943256
ATT: Exchange MTU Request (0x02) len 2
Client RX MTU: 512
> HCI Event: Number of Completed Packets (0x13) plen 5 #85 [hci0] 44.951631
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 7 #86 [hci0] 44.958819
ATT: Exchange MTU Response (0x03) len 2
Server RX MTU: 252
< ACL Data TX: Handle 0 flags 0x00 dlen 11 #87 [hci0] 44.959206
ATT: Read By Group Type Request (0x10) len 6
Handle range: 0x0001-0xffff
Attribute group type: Primary Service (0x2800)
> HCI Event: Number of Completed Packets (0x13) plen 5 #88 [hci0] 44.966424
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 18 #89 [hci0] 44.981592
ATT: Read By Group Type Response (0x11) len 13
Attribute data length: 6
Attribute group list: 2 entries
Handle range: 0x0001-0x0008
UUID: Generic Attribute Profile (0x1801)
Handle range: 0x0009-0x000f
UUID: Generic Access Profile (0x1800)
< ACL Data TX: Handle 0 flags 0x00 dlen 11 #90 [hci0] 44.981984
ATT: Read By Group Type Request (0x10) len 6
Handle range: 0x0010-0xffff
Attribute group type: Primary Service (0x2800)
> HCI Event: Number of Completed Packets (0x13) plen 5 #91 [hci0] 44.989632
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 26 #92 [hci0] 45.011685
ATT: Read By Group Type Response (0x11) len 21
Attribute data length: 20
Attribute group list: 1 entry
Handle range: 0x0010-0x0013
UUID: Vendor specific (8d53dc1d-1db7-4cd3-868b-8a527460aa84)
< ACL Data TX: Handle 0 flags 0x00 dlen 11 #93 [hci0] 45.012470
ATT: Read By Group Type Request (0x10) len 6
Handle range: 0x0014-0xffff
Attribute group type: Primary Service (0x2800)
> HCI Event: Number of Completed Packets (0x13) plen 5 #94 [hci0] 45.019720
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 9 #95 [hci0] 45.026237
ATT: Error Response (0x01) len 4
Read By Group Type Request (0x10)
Handle: 0x0014
Error: Attribute Not Found (0x0a)
< ACL Data TX: Handle 0 flags 0x00 dlen 11 #96 [hci0] 45.026795
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0x0008
Attribute type: Characteristic (0x2803)
> HCI Event: Number of Completed Packets (0x13) plen 5 #97 [hci0] 45.034603
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 27 #98 [hci0] 45.041407
ATT: Read By Type Response (0x09) len 22
Attribute data length: 7
Attribute data list: 3 entries
Handle: 0x0002
Value: 200300052a
Handle: 0x0005
Value: 0a0600292b
Handle: 0x0007
Value: 0208002a2b
< ACL Data TX: Handle 0 flags 0x00 dlen 9 #99 [hci0] 45.041907
ATT: Find Information Request (0x04) len 4
Handle range: 0x0004-0x0004
> HCI Event: Number of Completed Packets (0x13) plen 5 #100 [hci0] 45.049883
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 10 #101 [hci0] 45.056303
ATT: Find Information Response (0x05) len 5
Format: UUID-16 (0x01)
Handle: 0x0004
UUID: Client Characteristic Configuration (0x2902)
< ACL Data TX: Handle 0 flags 0x00 dlen 11 #102 [hci0] 45.056852
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0009-0x000f
Attribute type: Characteristic (0x2803)
> HCI Event: Number of Completed Packets (0x13) plen 5 #103 [hci0] 45.071372
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 27 #104 [hci0] 45.078784
ATT: Read By Type Response (0x09) len 22
Attribute data length: 7
Attribute data list: 3 entries
Handle: 0x000a
Value: 020b00002a
Handle: 0x000c
Value: 020d00012a
Handle: 0x000e
Value: 020f00042a
< ACL Data TX: Handle 0 flags 0x00 dlen 11 #105 [hci0] 45.079193
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0010-0x0013
Attribute type: Characteristic (0x2803)
> HCI Event: Number of Completed Packets (0x13) plen 5 #106 [hci0] 45.086497
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 27 #107 [hci0] 45.093751
ATT: Read By Type Response (0x09) len 22
Attribute data length: 21
Attribute data list: 1 entry
Handle: 0x0011
Value: 141200487c997411269eae014ecefb28782eda
< ACL Data TX: Handle 0 flags 0x00 dlen 11 #108 [hci0] 45.094230
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0013-0x0013
Attribute type: Characteristic (0x2803)
> HCI Event: Number of Completed Packets (0x13) plen 5 #109 [hci0] 45.101578
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 9 #110 [hci0] 45.108557
ATT: Error Response (0x01) len 4
Read By Type Request (0x08)
Handle: 0x0013
Error: Attribute Not Found (0x0a)
< ACL Data TX: Handle 0 flags 0x00 dlen 9 #111 [hci0] 45.108953
ATT: Find Information Request (0x04) len 4
Handle range: 0x0013-0x0013
> HCI Event: Number of Completed Packets (0x13) plen 5 #112 [hci0] 45.116513
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 10 #113 [hci0] 45.123790
ATT: Find Information Response (0x05) len 5
Format: UUID-16 (0x01)
Handle: 0x0013
UUID: Client Characteristic Configuration (0x2902)
< ACL Data TX: Handle 0 flags 0x00 dlen 9 #114 [hci0] 45.124025
ATT: Write Request (0x12) len 4
Handle: 0x0013
Data: 0100
> HCI Event: Number of Completed Packets (0x13) plen 5 #115 [hci0] 45.131405
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 5 #116 [hci0] 45.138818
ATT: Write Response (0x13) len 0
< ACL Data TX: Handle 0 flags 0x00 dlen 24 #117 [hci0] 45.139679
ATT: Write Command (0x52) len 19
Handle: 0x0012
Data: 0200000900004200a161646568656c6c6f
> HCI Event: Number of Completed Packets (0x13) plen 5 #118 [hci0] 45.146541
Num handles: 1
Handle: 0
Count: 1
> ACL Data RX: Handle 0 flags 0x02 dlen 25 #119 [hci0] 45.153834
ATT: Handle Value Notification (0x1b) len 20
Handle: 0x0012
Data: 0300000a00004200bf61726568656c6c6fff
< HCI Command: Disconnect (0x01|0x0006) plen 3 #120 [hci0] 45.159191
Handle: 0
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Command Status (0x0f) plen 4 #121 [hci0] 45.162343
Disconnect (0x01|0x0006) ncmd 1
Status: Success (0x00)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #122 [hci0] 45.162838
> HCI Event: Command Complete (0x0e) plen 10 #123 [hci0] 45.165375
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ USER Close: mcumgr {0x0003} [hci0] 45.165649
= Close Index: 00:00:00:00:00:00 [hci0] 45.165754
@ MGMT Event: Index Added (0x0004) plen 0 {0x0002} [hci0] 45.170294
@ MGMT Event: Index Added (0x0004) plen 0 {0x0001} [hci0] 45.170294
@ MGMT Command: Read Controller In.. (0x0004) plen 0 {0x0001} [hci0] 45.170504
@ MGMT Event: Command Complete (0x0001) plen 283 {0x0001} [hci0] 45.170515
Read Controller Information (0x0004) plen 280
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
Version: Reserved (0x0b)
Manufacturer: The Linux Foundation (1521)
Supported settings: 0x0001be1b
Powered
Connectable
Discoverable
Bondable
Low Energy
Advertising
Secure Connections
Debug Keys
Privacy
Static Address
PHY Configuration
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
Name: ubuntu
Short name:
@ MGMT Command: Remove UUID (0x0011) plen 16 {0x0001} [hci0] 45.171311
UUID: 00000000-0000-0000-0000-000000000000
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 45.171323
Remove UUID (0x0011) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Remove Device (0x0034) plen 7 {0x0001} [hci0] 45.171359
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci0] 45.171536
Remove Device (0x0034) plen 7
Status: Success (0x00)
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Command: Set Static Address (0x002b) plen 6 {0x0001} [hci0] 45.171612
Address: C2:BA:65:A1:DF:3B (Static)
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 45.171617
Set Static Address (0x002b) plen 4
Status: Success (0x00)
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 45.171618
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
@ MGMT Command: Set Privacy (0x002f) plen 17 {0x0001} [hci0] 45.171649
Privacy: Disabled (0x00)
Key: 00000000000000000000000000000000
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 45.171652
Set Privacy (0x002f) plen 4
Status: Success (0x00)
Current settings: 0x00008a00
Low Energy
Secure Connections
Static Address
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 45.171680
UUID: 00001800-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 45.171682
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 45.171713
UUID: 00001801-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 45.171715
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Read Advertising F.. (0x003d) plen 0 {0x0001} [hci0] 45.171745
@ MGMT Event: Command Complete (0x0001) plen 11 {0x0001} [hci0] 45.171747
Read Advertising Features (0x003d) plen 8
Status: Success (0x00)
Flags: 0x0000007f
Switch into Connectable mode
Advertise as Discoverable
Advertise as Limited Discoverable
Add Flags field to Advertising Data
Add TX Power field to Advertising Data
Add Appearance field to Scan Response
Add Local Name in Scan Response
Advertising data length: 31
Scan response length: 31
Max instances: 5
Instances: 0
@ MGMT Command: Set Powered (0x0005) plen 1 {0x0001} [hci0] 45.171775
Powered: Enabled (0x01)
= Open Index: 00:00:00:00:00:00 [hci0] 45.171835
< HCI Command: Reset (0x03|0x0003) plen 0 #124 [hci0] 45.171900
> HCI Event: Disconnect Complete (0x05) plen 4 #125 [hci0] 45.173304
Status: Success (0x00)
Handle: 0
Reason: Connection Terminated By Local Host (0x16)
= bluetoothd: Endpoint registered: sender=:1.70 path=/MediaEndpoi.. 45.177932
= bluetoothd: Endpoint registered: sender=:1.70 path=/MediaEndpoi.. 45.177962
> HCI Event: Command Complete (0x0e) plen 4 #126 [hci0] 45.176261
Reset (0x03|0x0003) ncmd 1
Status: Success (0x00)
< HCI Command: Read Local Support.. (0x04|0x0003) plen 0 #127 [hci0] 45.176319
> HCI Event: Command Complete (0x0e) plen 12 #128 [hci0] 45.179643
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x00
BR/EDR Not Supported
LE Supported (Controller)
< HCI Command: Read Local Version.. (0x04|0x0001) plen 0 #129 [hci0] 45.179771
> HCI Event: Command Complete (0x0e) plen 12 #130 [hci0] 45.183264
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: Reserved (0x0b) - Revision 0 (0x0000)
LMP version: Reserved (0x0b) - Subversion 65535 (0xffff)
Manufacturer: The Linux Foundation (1521)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 #131 [hci0] 45.183350
> HCI Event: Command Complete (0x0e) plen 10 #132 [hci0] 45.186659
Read BD ADDR (0x04|0x0009) ncmd 1
Status: Success (0x00)
Address: 00:00:00:00:00:00 (OUI 00-00-00)
< HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 #133 [hci0] 45.186828
> HCI Event: Command Complete (0x0e) plen 7 #134 [hci0] 45.189185
LE Read Buffer Size (0x08|0x0002) ncmd 1
Status: Success (0x00)
Data packet length: 27
Num data packets: 7
< HCI Command: LE Read Local Supp.. (0x08|0x0003) plen 0 #135 [hci0] 45.189280
> HCI Event: Command Complete (0x0e) plen 12 #136 [hci0] 45.191269
LE Read Local Supported Features (0x08|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0x49 0x01 0x00 0x00 0x00 0x00 0x00
LE Encryption
Connection Parameter Request Procedure
Extended Reject Indication
Slave-initiated Features Exchange
LE Ping
LE Data Packet Length Extension
LL Privacy
Extended Scanner Filter Policies
LE 2M PHY
LE Coded PHY
Channel Selection Algorithm #2
Minimum Number of Used Channels Procedure
< HCI Command: LE Read Supported... (0x08|0x001c) plen 0 #137 [hci0] 45.191365
> HCI Event: Command Complete (0x0e) plen 12 #138 [hci0] 45.194612
LE Read Supported States (0x08|0x001c) ncmd 1
Status: Success (0x00)
States: 0x000003ffff3fffff
Non-connectable Advertising State
Scannable Advertising State
Connectable Advertising State
High Duty Cycle Directed Advertising State
Passive Scanning State
Active Scanning State
Initiating State
and Connection State (Master Role)
Connection State (Slave Role)
Non-connectable Advertising State
and Passive Scanning State
Scannable Advertising State
and Passive Scanning State
Connectable Advertising State
and Passive Scanning State
High Duty Cycle Directed Advertising State
and Passive Scanning State
Non-connectable Advertising State
and Active Scanning State
Scannable Advertising State
and Active Scanning State
Connectable Advertising State
and Active Scanning State
High Duty Cycle Directed Advertising State
and Active Scanning State
Non-connectable Advertising State
and Initiating State
Scannable Advertising State
and Initiating State
Non-connectable Advertising State
and Connection State (Master Role)
Scannable Advertising State
and Connection State (Master Role)
Non-connectable Advertising State
and Connection State (Slave Role)
Scannable Advertising State
and Connection State (Slave Role)
Passive Scanning State
and Connection State (Master Role)
Active Scanning State
and Connection State (Master Role)
Passive Scanning State
and Connection State (Slave Role)
Active Scanning State
and Connection State (Slave Role)
Initiating State
and Connection State (Master Role)
and Master Role & Master Role
Low Duty Cycle Directed Advertising State
Low Duty Cycle Directed Advertising State
and Passive Scanning State
Low Duty Cycle Directed Advertising State
and Active Scanning State
Connectable Advertising State
and Initiating State
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Initiating State
and Master Role & Slave Role
Low Duty Cycle Directed Advertising State
and Initiating State
and Master Role & Slave Role
Connectable Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
Low Duty Cycle Directed Advertising State
and Connection State (Master Role)
and Master Role & Slave Role
Connectable Advertising State
and Connection State (Slave Role)
and Master Role & Slave Role
High Duty Cycle Directed Advertising State
and Connection State (Slave Role)
and Slave Role & Slave Role
Low Duty Cycle Directed Advertising State
and Connection State (Slave Role)
and Slave Role & Slave Role
Initiating State
and Connection State (Slave Role)
and Master Role & Slave Role
< HCI Command: Read Local Support.. (0x04|0x0002) plen 0 #139 [hci0] 45.194729
> HCI Event: Command Complete (0x0e) plen 68 #140 [hci0] 45.200443
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 61 entries
Disconnect (Octet 0 - Bit 5)
Read Remote Version Information (Octet 2 - Bit 7)
Set Event Mask (Octet 5 - Bit 6)
Reset (Octet 5 - Bit 7)
Read Transmit Power Level (Octet 10 - Bit 2)
Set Controller To Host Flow Control (Octet 10 - Bit 5)
Host Buffer Size (Octet 10 - Bit 6)
Host Number of Completed Packets (Octet 10 - Bit 7)
Read Local Version Information (Octet 14 - Bit 3)
Read Local Supported Features (Octet 14 - Bit 5)
Read BD ADDR (Octet 15 - Bit 1)
Read RSSI (Octet 15 - Bit 5)
Set Event Mask Page 2 (Octet 22 - Bit 2)
LE Set Event Mask (Octet 25 - Bit 0)
LE Read Buffer Size (Octet 25 - Bit 1)
LE Read Local Supported Features (Octet 25 - Bit 2)
LE Set Random Address (Octet 25 - Bit 4)
LE Set Advertising Parameters (Octet 25 - Bit 5)
LE Read Advertising Channel TX Power (Octet 25 - Bit 6)
LE Set Advertising Data (Octet 25 - Bit 7)
LE Set Scan Response Data (Octet 26 - Bit 0)
LE Set Advertise Enable (Octet 26 - Bit 1)
LE Set Scan Parameters (Octet 26 - Bit 2)
LE Set Scan Enable (Octet 26 - Bit 3)
LE Create Connection (Octet 26 - Bit 4)
LE Create Connection Cancel (Octet 26 - Bit 5)
LE Read White List Size (Octet 26 - Bit 6)
LE Clear White List (Octet 26 - Bit 7)
LE Add Device To White List (Octet 27 - Bit 0)
LE Remove Device From White List (Octet 27 - Bit 1)
LE Connection Update (Octet 27 - Bit 2)
LE Set Host Channel Classification (Octet 27 - Bit 3)
LE Read Channel Map (Octet 27 - Bit 4)
LE Read Remote Used Features (Octet 27 - Bit 5)
LE Encrypt (Octet 27 - Bit 6)
LE Rand (Octet 27 - Bit 7)
LE Start Encryption (Octet 28 - Bit 0)
LE Long Term Key Request Reply (Octet 28 - Bit 1)
LE Long Term Key Request Neg Reply (Octet 28 - Bit 2)
LE Read Supported States (Octet 28 - Bit 3)
Read Authenticated Payload Timeout (Octet 32 - Bit 4)
Write Authenticated Payload Timeout (Octet 32 - Bit 5)
LE Remote Connection Parameter Request Reply (Octet 33 - Bit 4)
LE Remote Connection Parameter Request Negative Reply (Octet 33 - Bit 5)
LE Set Data Length (Octet 33 - Bit 6)
LE Read Suggested Default Data Length (Octet 33 - Bit 7)
LE Write Suggested Default Data Length (Octet 34 - Bit 0)
LE Add Device To Resolving List (Octet 34 - Bit 3)
LE Remove Device From Resolving List (Octet 34 - Bit 4)
LE Clear Resolving List (Octet 34 - Bit 5)
LE Read Resolving List Size (Octet 34 - Bit 6)
LE Read Peer Resolvable Address (Octet 34 - Bit 7)
LE Read Local Resolvable Address (Octet 35 - Bit 0)
LE Set Address Resolution Enable (Octet 35 - Bit 1)
LE Set Resolvable Private Address Timeout (Octet 35 - Bit 2)
LE Read Maximum Data Length (Octet 35 - Bit 3)
LE Read PHY (Octet 35 - Bit 4)
LE Set Default PHY (Octet 35 - Bit 5)
LE Set PHY (Octet 35 - Bit 6)
LE Read Transmit Power (Octet 38 - Bit 7)
LE Set Privacy Mode (Octet 39 - Bit 2)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 #141 [hci0] 45.200667
Mask: 0x200080000204e890
Disconnection Complete
Encryption Change
Read Remote Version Information Complete
Command Complete
Command Status
Hardware Error
Number of Completed Packets
Data Buffer Overflow
Encryption Key Refresh Complete
LE Meta
> HCI Event: Command Complete (0x0e) plen 4 #142 [hci0] 45.203375
Set Event Mask (0x03|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 #143 [hci0] 45.203509
Mask: 0x0000000000080e7f
LE Connection Complete
LE Advertising Report
LE Connection Update Complete
LE Read Remote Used Features Complete
LE Long Term Key Request
LE Remote Connection Parameter Request
LE Data Length Change
LE Enhanced Connection Complete
LE Direct Advertising Report
LE PHY Update Complete
LE Channel Selection Algorithm
> HCI Event: Command Complete (0x0e) plen 4 #144 [hci0] 45.205306
LE Set Event Mask (0x08|0x0001) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Advertisin.. (0x08|0x0007) plen 0 #145 [hci0] 45.205367
> HCI Event: Command Complete (0x0e) plen 5 #146 [hci0] 45.208226
LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1
Status: Success (0x00)
TX power: 0 dbm (0x00)
< HCI Command: LE Read White List.. (0x08|0x000f) plen 0 #147 [hci0] 45.208271
> HCI Event: Command Complete (0x0e) plen 5 #148 [hci0] 45.211396
LE Read White List Size (0x08|0x000f) ncmd 1
Status: Success (0x00)
Size: 8
< HCI Command: LE Clear White List (0x08|0x0010) plen 0 #149 [hci0] 45.211559
> HCI Event: Command Complete (0x0e) plen 4 #150 [hci0] 45.214412
LE Clear White List (0x08|0x0010) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Resolving... (0x08|0x002a) plen 0 #151 [hci0] 45.214497
> HCI Event: Command Complete (0x0e) plen 5 #152 [hci0] 45.218441
LE Read Resolving List Size (0x08|0x002a) ncmd 1
Status: Success (0x00)
Size: 8
< HCI Command: LE Clear Resolving.. (0x08|0x0029) plen 0 #153 [hci0] 45.218481
> HCI Event: Command Complete (0x0e) plen 4 #154 [hci0] 45.220291
LE Clear Resolving List (0x08|0x0029) ncmd 1
Status: Success (0x00)
< HCI Command: LE Read Maximum Da.. (0x08|0x002f) plen 0 #155 [hci0] 45.220366
> HCI Event: Command Complete (0x0e) plen 12 #156 [hci0] 45.222176
LE Read Maximum Data Length (0x08|0x002f) ncmd 1
Status: Success (0x00)
Max TX octets: 27
Max TX time: 2704
Max RX octets: 27
Max RX time: 2704
< HCI Command: LE Read Suggested... (0x08|0x0023) plen 0 #157 [hci0] 45.222254
> HCI Event: Command Complete (0x0e) plen 8 #158 [hci0] 45.224413
LE Read Suggested Default Data Length (0x08|0x0023) ncmd 1
Status: Success (0x00)
TX octets: 27
TX time: 328
< HCI Command: Set Event Mask Pag.. (0x03|0x0063) plen 8 #159 [hci0] 45.224514
Mask: 0x0000000000800000
Authenticated Payload Timeout Expired
> HCI Event: Command Complete (0x0e) plen 4 #160 [hci0] 45.226305
Set Event Mask Page 2 (0x03|0x0063) ncmd 1
Status: Success (0x00)
< HCI Command: LE Write Suggested.. (0x08|0x0024) plen 4 #161 [hci0] 45.226423
TX octets: 27
TX time: 2704
> HCI Event: Command Complete (0x0e) plen 4 #162 [hci0] 45.229412
LE Write Suggested Default Data Length (0x08|0x0024) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Default PHY (0x08|0x0031) plen 3 #163 [hci0] 45.229492
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
> HCI Event: Command Complete (0x0e) plen 4 #164 [hci0] 45.231291
LE Set Default PHY (0x08|0x0031) ncmd 1
Status: Success (0x00)
= Index Info: 00:00:00:00:00:00 (The Linux Foundation) [hci0] 45.231442
< HCI Command: LE Set Advertisin.. (0x08|0x0008) plen 32 #165 [hci0] 45.231520
Length: 6
Flags: 0x04
BR/EDR Not Supported
TX power: 0 dBm
> HCI Event: Command Complete (0x0e) plen 4 #166 [hci0] 45.234406
LE Set Advertising Data (0x08|0x0008) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Respo.. (0x08|0x0009) plen 32 #167 [hci0] 45.234489
Length: 9
Name (complete): ubuntu
> HCI Event: Command Complete (0x0e) plen 4 #168 [hci0] 45.237395
LE Set Scan Response Data (0x08|0x0009) ncmd 1
Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 7 {0x0001} [hci0] 45.237546
Set Powered (0x0005) plen 4
Status: Success (0x00)
Current settings: 0x00008a01
Powered
Low Energy
Secure Connections
Static Address
@ MGMT Event: New Settings (0x0006) plen 4 {0x0002} [hci0] 45.237580
Current settings: 0x00008a01
Powered
Low Energy
Secure Connections
Static Address
@ MGMT Command: Set Local Name (0x000f) plen 260 {0x0001} [hci0] 45.237683
Name: ubuntu
Short name:
@ MGMT Event: Command Complete (0x0001) plen 263 {0x0001} [hci0] 45.237687
Set Local Name (0x000f) plen 260
Status: Success (0x00)
Name: ubuntu
Short name:
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 45.237707
UUID: 0000110e-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 45.237709
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 45.237729
UUID: 0000110c-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 45.237730
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 45.237747
UUID: 00001112-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 45.237748
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 45.237764
UUID: 00001108-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 45.237765
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Unblock Device (0x0027) plen 7 {0x0001} [hci0] 45.237782
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Event: Device Unblocked (0x0015) plen 7 {0x0002} [hci0] 45.237783
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Event: Command Complete (0x0001) plen 10 {0x0001} [hci0] 45.237785
Unblock Device (0x0027) plen 7
Status: Success (0x00)
BR/EDR Address: 00:00:00:00:00:00 (OUI 00-00-00)
@ MGMT Command: Load Long Term Keys (0x0013) plen 2 {0x0001} [hci0] 45.237800
Keys: 0
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 45.237802
Load Long Term Keys (0x0013) plen 0
Status: Success (0x00)
@ MGMT Command: Load Identity Reso.. (0x0030) plen 2 {0x0001} [hci0] 45.237818
Keys: 0
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 45.237819
Load Identity Resolving Keys (0x0030) plen 0
Status: Success (0x00)
@ MGMT Command: Load Connection Pa.. (0x0035) plen 2 {0x0001} [hci0] 45.237835
Parameters: 0
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 45.237836
Load Connection Parameters (0x0035) plen 0
Status: Success (0x00)
@ MGMT Command: Add UUID (0x0010) plen 17 {0x0001} [hci0] 45.237852
UUID: 00001200-0000-1000-8000-00805f9b34fb
Service class: 0x00
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001} [hci0] 45.237853
Add UUID (0x0010) plen 3
Status: Success (0x00)
Class: 0x000000
Major class: Miscellaneous
Minor class: 0x00
@ MGMT Command: Set Device ID (0x0028) plen 8 {0x0001} [hci0] 45.237869
Device ID: USB Implementer's Forum assigned (0x0002)
Vendor: Linux Foundation (0x1d6b)
Product: 0x0246
Version: 5.3.5 (0x0535)
@ MGMT Event: Command Complete (0x0001) plen 3 {0x0001} [hci0] 45.237870
Set Device ID (0x0028) plen 0
Status: Success (0x00)
@ MGMT Command: Set Local Name (0x000f) plen 260 {0x0001} [hci0] 45.237886
Name: ubuntu
Short name:
@ MGMT Event: Command Complete (0x0001) plen 263 {0x0001} [hci0] 45.237887
Set Local Name (0x000f) plen 260
Status: Success (0x00)
As a reference, my setup has go1.16.2 and mcumgr 0.0.0-dev.
Could you provide some guidance on why this occurs and if there are any settings I could configure to have compatibility between the hci_usb sample w/ softdevice ctlr stack and the mcumgr tool?
Best regards,
Luis.
