nRF connect SDK - broken build

[Gabriele]

Hi,
after a couple of months of inactivity I try to rebuild my Zephyr-based application under nRF Connect SDK, tag 1.3.0.
I’m dumb-founded to see this unexpected print hereunder.
What’s going on ? Is it anything I did that broke the system ?

Thank you

Gabriele

~/qi2m-dev/ncs$ west build -b qi2m_nrf5340_cpuapp -d build_fot ../apps/fot/
-- west build: generating a build system
Including boilerplate (Zephyr base): /home/gabriele/qi2m-dev/ncs/zephyr/cmake/app/boilerplate.cmake
-- Application: /home/gabriele/qi2m-dev/apps/fot
-- Zephyr version: 2.3.0-rc1 (/home/gabriele/qi2m-dev/ncs/zephyr)
-- Found Python3: /usr/bin/python3.6 (found suitable exact version "3.6.9") found components:  Interpreter
-- Board: qi2m_nrf5340_cpuapp
ZEPHYR_TOOLCHAIN_VARIANT not set, trying to locate Zephyr SDK
CMake Error at /home/gabriele/qi2m-dev/ncs/zephyr/cmake/toolchain/zephyr/host-tools.cmake:115 (message):
  The SDK version you are using is not supported, please update your SDK.
 
  You need SDK version 0.11.1 or newer.
 
  You have version(s):
 
 
 
  The SDK can be downloaded from:
 
 
  https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.11.3/zephyr-sdk-0.11.3-setup.run
 
 
  Note: If you are using SDK 0.11.1 or 0.11.2, remember to set
  ZEPHYR_SDK_INSTALL_DIR and ZEPHYR_TOOLCHAIN_VARIANT
 
Call Stack (most recent call first):
  /home/gabriele/qi2m-dev/ncs/zephyr/cmake/host-tools.cmake:3 (include)
  /home/gabriele/qi2m-dev/ncs/zephyr/cmake/app/boilerplate.cmake:485 (include)
  /home/gabriele/qi2m-dev/ncs/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:24 (include)
  /home/gabriele/qi2m-dev/ncs/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:35 (include_boilerplate)
  CMakeLists.txt:11 (find_package)
 
 
-- Configuring incomplete, errors occurred!
FATAL ERROR: command exited with status 1: /home/gabriele/.local/bin/cmake -B/home/gabriele/qi2m-dev/ncs/build_fot -S/home/gabriele/qi2m-dev/apps/fot -GNinja -BOARD=qi2m_nrf5340_cpuapp
~/qi2m-dev/ncs$

[Gabriele]

Hello Marte,
Thank you for your advice.
Meanwhile I've decided to move NCS ahead, from 1.3.0 to 1.5.0.
The environment variable are now OK.
I can successfully rebuild the Hello World sample application again usign my off-tree board definition.
Unfortunately a Kconfig issue comes when building MCUBoot as a child application.

In main CMakeList.txt I have this:
set(mcuboot_CONF_FILE
${CMAKE_CURRENT_SOURCE_DIR}/mcuboot_config_file.conf
)

In mcuboot_config_file.conf I have only this:
CONFIG_MCUBOOT_LOG_LEVEL_OFF=y

Then I run:
$ cmake -B build -GNinja -DBOARD_ROOT="/home/gabriele/qi2m-dev/board-definition" .

and  this is what I get

CMake suite maintained and supported by Kitware (kitware.com/cmake).
rm: cannot remove 'build': No such file or directory
Including boilerplate (Zephyr base): /home/gabriele/qi2m-dev/nrf53sdk/ncs/zephyr/cmake/app/boilerplate.cmake
-- Application: /home/gabriele/qi2m-dev/apps/fot
-- Zephyr version: 2.4.99 (/home/gabriele/qi2m-dev/nrf53sdk/ncs/zephyr)
-- Found Python3: /usr/bin/python3.8 (found suitable exact version "3.8.5") found components: Interpreter 
-- Found west (found suitable version "0.9.99", minimum required is "0.7.1")
-- Board: qi2m_nrf5340_cpuapp
-- Cache files will be written to: /home/gabriele/.cache/zephyr
-- Found dtc: /home/gabriele/qi2m-dev/nrf53sdk/zephyr/sdk/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6")
-- Found toolchain: gnuarmemb (/home/gabriele/qi2m-dev/nrf53sdk/sdk/gnu-arm-emb-toolchain)
-- Found BOARD.dts: /home/gabriele/qi2m-dev/board-definition/boards/arm/qi2m_nrf5340/qi2m_nrf5340_cpuapp.dts
-- Found devicetree overlay: src/qi2m.overlay
qi2m_nrf5340_cpuapp.dts.pre.tmp:61.42-73.3: Warning (unique_unit_address_if_enabled): /soc/peripheral@50000000/flash-controller@39000: duplicate unit-address (also used in node /soc/peripheral@50000000/kmu@39000)
qi2m_nrf5340_cpuapp.dts.pre.tmp:348.19-354.3: Warning (unique_unit_address_if_enabled): /soc/peripheral@50000000/clock@5000: duplicate unit-address (also used in node /soc/peripheral@50000000/power@5000)
qi2m_nrf5340_cpuapp.dts.pre.tmp:588.31-589.5: Warning (unique_unit_address_if_enabled): /reserved-memory/image@20000000: duplicate unit-address (also used in node /reserved-memory/image_s@20000000)
  also defined at qi2m_nrf5340_cpuapp.dts.pre.tmp:608.14-610.3
-- Generated zephyr.dts: /home/gabriele/qi2m-dev/apps/fot/build/zephyr/zephyr.dts
-- Generated devicetree_unfixed.h: /home/gabriele/qi2m-dev/apps/fot/build/zephyr/include/generated/devicetree_unfixed.h
-- Generated device_extern.h: /home/gabriele/qi2m-dev/apps/fot/build/zephyr/include/generated/device_extern.h
Parsing /home/gabriele/qi2m-dev/apps/fot/Kconfig
Loaded configuration '/home/gabriele/qi2m-dev/board-definition/boards/arm/qi2m_nrf5340/qi2m_nrf5340_cpuapp_defconfig'
Merged configuration '/home/gabriele/qi2m-dev/apps/fot/prj.conf'
Configuration saved to '/home/gabriele/qi2m-dev/apps/fot/build/zephyr/.config'
Kconfig header saved to '/home/gabriele/qi2m-dev/apps/fot/build/zephyr/include/generated/autoconf.h'
-- The C compiler identification is GNU 10.2.1
-- The CXX compiler identification is GNU 10.2.1
-- The ASM compiler identification is GNU
-- Found assembler: /home/gabriele/qi2m-dev/nrf53sdk/sdk/gnu-arm-emb-toolchain/bin/arm-none-eabi-gcc
CMake Warning at /home/gabriele/qi2m-dev/nrf53sdk/ncs/zephyr/CMakeLists.txt:414 (message):
  One or more dts_fixup.h files detected:

  -
  /home/gabriele/qi2m-dev/board-definition/boards/arm/qi2m_nrf5340/dts_fixup.h

  Use of these files is deprecated; use the devicetree.h API instead.

=== child image mcuboot -  begin ===
Including boilerplate (Zephyr base): /home/gabriele/qi2m-dev/nrf53sdk/ncs/zephyr/cmake/app/boilerplate.cmake
-- Application: /home/gabriele/qi2m-dev/nrf53sdk/ncs/bootloader/mcuboot/boot/zephyr
-- Zephyr version: 2.4.99 (/home/gabriele/qi2m-dev/nrf53sdk/ncs/zephyr)
-- Found Python3: /usr/bin/python3.8 (found suitable exact version "3.8.5") found components: Interpreter 
-- Found west (found suitable version "0.9.99", minimum required is "0.7.1")
-- Board: qi2m_nrf5340_cpuapp
-- Cache files will be written to: /home/gabriele/.cache/zephyr
-- Found dtc: /home/gabriele/qi2m-dev/nrf53sdk/zephyr/sdk/bin/dtc (found suitable version "1.6.0", minimum required is "1.4.6")
-- Found toolchain: gnuarmemb (/home/gabriele/qi2m-dev/nrf53sdk/sdk/gnu-arm-emb-toolchain)
-- Found BOARD.dts: /home/gabriele/qi2m-dev/board-definition/boards/arm/qi2m_nrf5340/qi2m_nrf5340_cpuapp.dts
-- Found devicetree overlay: /home/gabriele/qi2m-dev/nrf53sdk/ncs/bootloader/mcuboot/boot/zephyr/dts.overlay
qi2m_nrf5340_cpuapp.dts.pre.tmp:61.42-73.3: Warning (unique_unit_address_if_enabled): /soc/peripheral@50000000/flash-controller@39000: duplicate unit-address (also used in node /soc/peripheral@50000000/kmu@39000)
qi2m_nrf5340_cpuapp.dts.pre.tmp:348.19-354.3: Warning (unique_unit_address_if_enabled): /soc/peripheral@50000000/clock@5000: duplicate unit-address (also used in node /soc/peripheral@50000000/power@5000)
qi2m_nrf5340_cpuapp.dts.pre.tmp:588.31-589.5: Warning (unique_unit_address_if_enabled): /reserved-memory/image@20000000: duplicate unit-address (also used in node /reserved-memory/image_s@20000000)
  also defined at qi2m_nrf5340_cpuapp.dts.pre.tmp:608.14-610.3
-- Generated zephyr.dts: /home/gabriele/qi2m-dev/apps/fot/build/mcuboot/zephyr/zephyr.dts
-- Generated devicetree_unfixed.h: /home/gabriele/qi2m-dev/apps/fot/build/mcuboot/zephyr/include/generated/devicetree_unfixed.h
-- Generated device_extern.h: /home/gabriele/qi2m-dev/apps/fot/build/mcuboot/zephyr/include/generated/device_extern.h
Parsing /home/gabriele/qi2m-dev/nrf53sdk/ncs/bootloader/mcuboot/boot/zephyr/Kconfig
Loaded configuration '/home/gabriele/qi2m-dev/board-definition/boards/arm/qi2m_nrf5340/qi2m_nrf5340_cpuapp_defconfig'
Merged configuration '/home/gabriele/qi2m-dev/apps/fot/mcuboot_config_file.conf'
Merged configuration '/home/gabriele/qi2m-dev/nrf53sdk/ncs/nrf/subsys/partition_manager/partition_manager_enabled.conf'

warning: The choice symbol MCUBOOT_LOG_LEVEL_OFF (defined at
subsys/logging/Kconfig.template.log_config:8) was selected (set =y), but no symbol ended up as the
choice selection. See
http://docs.zephyrproject.org/latest/reference/kconfig/CONFIG_MCUBOOT_LOG_LEVEL_OFF.html and/or look
up MCUBOOT_LOG_LEVEL_OFF in the menuconfig/guiconfig interface. The Application Development Primer,
Setting Configuration Values, and Kconfig - Tips and Best Practices sections of the manual might be
helpful too.


warning: FLASH_MAP (defined at subsys/storage/flash_map/Kconfig:10) has direct dependencies FLASH_HAS_DRIVER_ENABLED with value n, but is currently being y-selected by the following symbols:
 - MCUBOOT_DEVICE_SETTINGS (defined at /home/gabriele/qi2m-dev/nrf53sdk/ncs/bootloader/mcuboot/boot/zephyr/Kconfig:563), with value y, direct dependencies y (value: y)

error: Aborting due to Kconfig warnings

CMake Error at /home/gabriele/qi2m-dev/nrf53sdk/ncs/zephyr/cmake/kconfig.cmake:262 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  /home/gabriele/qi2m-dev/nrf53sdk/ncs/zephyr/cmake/app/boilerplate.cmake:534 (include)
  /home/gabriele/qi2m-dev/nrf53sdk/ncs/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:24 (include)
  /home/gabriele/qi2m-dev/nrf53sdk/ncs/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:35 (include_boilerplate)
  CMakeLists.txt:44 (find_package)

-- Configuring incomplete, errors occurred!
CMake Error at /home/gabriele/qi2m-dev/nrf53sdk/ncs/nrf/cmake/multi_image.cmake:287 (message):
  CMake generation for mcuboot failed, aborting.  Command: 1
Call Stack (most recent call first):
  /home/gabriele/qi2m-dev/nrf53sdk/ncs/nrf/cmake/multi_image.cmake:84 (add_child_image_from_source)
  /home/gabriele/qi2m-dev/nrf53sdk/ncs/nrf/modules/mcuboot/CMakeLists.txt:112 (add_child_image)

-- Configuring incomplete, errors occurred!
See also "/home/gabriele/qi2m-dev/apps/fot/build/CMakeFiles/CMakeOutput.log".

[Marte Myrvold]

Hi,

Did you add MCUboot as a child image following this guide for defining and enabling a child image?

Please note that due to Easter we are short staffed, so response time might be slower. It will be back to normal Tuesday 6th of April.

Best regards,

Marte

[Gabriele]

Hi,
as requested in that abstruse guide,
I've added the following chunck of code to parent application's CMakeLists.txt

if (CONFIG_BOOTLOADER_MCUBOOT)
add_child_image(
NAME mcuboot
SOURCE_DIR ${MCUBOOT_DIR}/boot/zephyr
)
endif()

No variation is observed in the build output.

[Marte Myrvold]

Hi,

Do you have CONFIG_BOOTLOADER_MCUBOOT=y in prj.conf? In order to change configurations, you must also add the configuration to the prj.conf file, as this file is used for the application settings and is merged with a board file (*_defconfig) to set the initial configurations.

Best regards,

Marte