Communication between nrf52840 and nrf9160 on thingy 91

[Hamada888]

Hei

I am trying to make SPI or UART communication between nrf9160 and nrf52840 on thingy 91....... i need to send data from nrf52840 to nrf9160(i will use and print the data)
what is the best way to do it? I tried connectivity bridge, but with no hope......

Another small question....i cannot get any thing out on putty when i write printk("hello world"); in the main function in connectivity bridge code ...how to fix it?

[Albrecht Markus Schellenberger]

Hamada888 said:

but i get another feil (Failed to set callback) 

Have you defined a callback function in main.c, as shown below from the LPUART sample?

static void uart_callback(const struct device *dev,
			  struct uart_event *evt,
			  void *user_data)
{
	struct device *uart = user_data;
	int err;

	switch (evt->type) {
	case UART_TX_DONE:
		LOG_INF("Tx sent %d bytes", evt->data.tx.len);
		break;

	case UART_TX_ABORTED:
		LOG_ERR("Tx aborted");
		break;

	case UART_RX_RDY:
		LOG_INF("Received data %d bytes", evt->data.rx.len);
		break;

	case UART_RX_BUF_REQUEST:
	{
		uint8_t *buf;

		err = k_mem_slab_alloc(&uart_slab, (void **)&buf, K_NO_WAIT);
		__ASSERT(err == 0, "Failed to allocate slab");

		err = uart_rx_buf_rsp(uart, buf, BUF_SIZE);
		__ASSERT(err == 0, "Failed to provide new buffer");
		break;
	}

	case UART_RX_BUF_RELEASED:
		k_mem_slab_free(&uart_slab, (void **)&evt->data.rx_buf.buf);
		break;

	case UART_RX_DISABLED:
		break;

	case UART_RX_STOPPED:
		break;
	}
}

Cheers!

Markus

[Hamada888]

yes.... all the code is in main.c

[Hamada888]

#define BUF_SIZE 64
static K_MEM_SLAB_DEFINE(uart_slab, BUF_SIZE, 3, 4);

static void uart_irq_handler(const struct device *dev, void *context)
{
uint8_t buf[] = {1, 2, 3, 4, 5};

if (uart_irq_tx_ready(dev)) {
(void)uart_fifo_fill(dev, buf, sizeof(buf));
uart_irq_tx_disable(dev);
}

if (uart_irq_rx_ready(dev)) {
uint8_t buf[10];
int len = uart_fifo_read(dev, buf, sizeof(buf));

if (len) {
printk("read %d bytes\n", len);
}
}
}

static void interrupt_driven(const struct device *dev)
{
uint8_t c = 0xff;

uart_irq_callback_set(dev, uart_irq_handler);
uart_irq_rx_enable(dev);
while (1) {
uart_irq_tx_enable(dev);
k_sleep(K_MSEC(500));

uart_poll_out(dev, c);
k_sleep(K_MSEC(100));
}
}

static void uart_callback(const struct device *dev,
struct uart_event *evt,
void *user_data)
{
struct device *uart = user_data;
int err;

switch (evt->type) {
case UART_TX_DONE:
LOG_INF("Tx sent %d bytes", evt->data.tx.len);
break;

case UART_TX_ABORTED:
LOG_ERR("Tx aborted");
break;

case UART_RX_RDY:
LOG_INF("Received data %d bytes", evt->data.rx.len);
break;

case UART_RX_BUF_REQUEST:
{
uint8_t *buf;

err = k_mem_slab_alloc(&uart_slab, (void **)&buf, K_NO_WAIT);
__ASSERT(err == 0, "Failed to allocate slab");

err = uart_rx_buf_rsp(uart, buf, BUF_SIZE);
__ASSERT(err == 0, "Failed to provide new buffer");
break;
}

case UART_RX_BUF_RELEASED:
k_mem_slab_free(&uart_slab, (void **)&evt->data.rx_buf.buf);
break;

case UART_RX_DISABLED:
break;

case UART_RX_STOPPED:
break;
}
}

static void async(const struct device *uart0_dev)
{
uint8_t txbuf[5] = {1, 2, 3, 4, 5};
int err;
uint8_t *buf;

err = k_mem_slab_alloc(&uart_slab, (void **)&buf, K_NO_WAIT);
__ASSERT(err == 0, "Failed to alloc slab");

err = uart_callback_set(uart0_dev, uart_callback, (void *)uart0_dev);
__ASSERT(err == 0, "Failed to set callback");

err = uart_rx_enable(uart0_dev, buf, BUF_SIZE, 10);
__ASSERT(err == 0, "Failed to enable RX");

while (1) {
err = uart_tx(uart0_dev, txbuf, sizeof(txbuf), 10);
__ASSERT(err == 0, "Failed to initiate transmission");

k_sleep(K_MSEC(500));

uart_poll_out(uart0_dev, txbuf[0]);
k_sleep(K_MSEC(100));
}
}