Load Examples into Dev Board

[Ruben MS]

Hi.

I have 3 Dev Board's MBN52832DK and Ill like like to upload the BT Mesh example into those boards and I'm not very expert on this topic, dis you have any Webminar or file that can teach me how to program this and put up and running.

Thanks in advance

Ruben Martinez

[awneil]

Ruben MS said:

MBN52832DK

They don't sound like Nordic part numbers - you'd need to contact the board manufacturer for specific details.

I would strongly suggest that you start with Nordic Dev Kits to become familiar with the part, the tools, etc.

Once you have that foundation, you will be in a position to port stuff to other hardware.

[Einar Thorsrud]

Hi Ruben,

The Murata Electronics MBN52832DK Development Kit is a DK for a MBN52832 module incorporating the nRF52832, so you can use this like any other nRF52832. The kit also has an onboard debugger, so you can use it in the same way as a nRF52 DK. I suggest you start with Getting started with nRF5 SDK and SES.

Note that unlike the nRF52 DK, the MBN52832 does not have the optional 32.768 kHz LF crystal, so you need to modify the examples to use the internal LFRC instead, as described here.

Einar