Hi all I have Openthread setup BorderRouter [ with Raspberry pi and nordic in NCP design]. EFR32 radio board that has been flashed with ot-cli-ftd and made as Leader while configuring. Successfully Commissioned the EFR32 device into the network using Commissioning App. I need to demo a working example to ensure that I have successfully configured the thread network and is up and running with the existing setup. It would be of a great help if any one can suggest me what can be done to demo using this setup. Thank you in advance.

This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

Need help on what to demo to ensure OpenThread is working

Hi all

I have Openthread setup

BorderRouter [ with Raspberry pi and nordic in NCP design].
EFR32 radio board that has been flashed with ot-cli-ftd and made as Leader while configuring.
Successfully Commissioned the EFR32 device into the network using Commissioning App.

I need to demo a working example to ensure that I have successfully configured the thread network and is up and running with the existing setup.

It would be of a great help if any one can suggest me what can be done to demo using this setup.

Thank you in advance.

Parents

Reply

Children

No Data