• State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 88 subscribers
  • Views 809 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 269263
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Thread with Coded PHY

ENC

Hello,

I'm working on a project with the nRF52840 PCA10056 board. I want to use Thread protocol. But I'm not sure if Thread supports Coded PHY, a feature of Bluetooth 5.0. Can Thread be used like BLE Long Range or Thread distance can be increased?

Thank you for your help,

Best Regards.

Parents
  • +1

    Agree with Andrew, Thread is based on the IEEE 802.15.4 MAC and PHY layers at the bottom, and the IEEE 802.15.4 standard supports a 250 kbit/s data link at a range of 10m. If your applications need langer distance, you may need to add relay device or use other solutions like BLE long range.

    Best regard,

    Charlie

Reply
  • +1

    Agree with Andrew, Thread is based on the IEEE 802.15.4 MAC and PHY layers at the bottom, and the IEEE 802.15.4 standard supports a 250 kbit/s data link at a range of 10m. If your applications need langer distance, you may need to add relay device or use other solutions like BLE long range.

    Best regard,

    Charlie

Children
No Data
Related