BLE DFU, MCU to MCU (Zephyr), GATT DFU SMP Service Clinet

[Vojislav]

Hi,

So, I want to do BLE DFU from one nRF52 MCU to another nRF52 MCU. The start point for me was this:

• put SMP server sample on one nrf52dk (this device is advertising)
• put Bluetooth: Central DFU SMP sample on other nrf52dk
• they connect by default because the board that is advertising (the first one) has an SMP service.
• I can send echo command over BLE SMP

Now my question: Is there an example that shows how to use the GATT DFU SMP Service Client to send the new image to the device and reboot it (do the BLE OTA DFU) or this is something I need to do manually using the GATT DFU SMP Service Client library? And also is it possible to do the BLE OTA DFU using the GATT DFU SMP Service Client?

I am using NCS 1.5.0 on Ubuntu 18.04 LTS with two nrf52dk_nrf52832

Best regards,
Vojislav.

[Hakon]

Hello,

due to low staffing, you should expect some delay in response time until Tuesday. Thank you for your patience.

[Vojislav]

Hi Hakon,

have you managed to figure out something related to this issue?

Best regards,
Vojislav

[Sigurd]

Hi,

Is there an example that shows how to use the GATT DFU SMP Service Client to send the new image to the device and reboot it (do the BLE OTA DFU)

 No, unfortunately we don't have any examples on how to use this to do a DFU.

The name of the sample is misleading, as it does not show-case any DFU features. The sample connects to an SMP Server and sends a simple echo command. We plan to rename the sample, and remove the "DFU" part of it.

[Vojislav]

Ok, thanks,

And do you see that in the future you will add such an example based on SMP service client? Also, do you know if DFU can be done with this same client?


Best regards,
Vojislav.

[Sigurd]

Vojislav said:

And do you see that in the future you will add such an example based on SMP service client?

 As far as I know, there is no such plan at the moment.

Vojislav said:

Also, do you know if DFU can be done with this same client?

 I think it can be used as a starting point & and as a building block for that, but as-of-today it's missing DFU functionality.