• State Suggested Answer
  • Replies 14 replies
  • Answers 1 answer
  • Subscribers 66 subscribers
  • Views 3050 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 269932
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

PPK2 not turning on

macthestack

We just got the PPK2 delivered but it won't turn on. If we plug it in using "power only" it lights up but it doesn't do anything when we plug in the "data/power". It also won't show up in the profiler app, tried on both macos and linux.

Should we return it or is there an easy fix?

Parents
  • 0

    Hi, 

    That is definitely not how it should be. Did you try/do you have access to a Windows machine? Can you please try the following solution:

    Disconnect all other nordic devices from the computer, turn off the kit and remove it from the plastic by removing the four screws. Insert USB to J2 (USB DATA/POWER). Short a connection between GND (e.g on the four pin power output header) to TP34 on the PPK2. While holding the jumper cable, turn the kit on and remove the jumper. Now the PPK2 should be in bootloader again.

    Open the PPK app, and select the device which is now just a serial number.

    When selecting it, the user will be prompted to program the application and it should now be working again. 

    Kind regards,
    Øyvind

  • 0 in reply to Øyvind

    We don't have access to any windows machines, unfortunately.

    I tried the procedure you suggested with no luck. The lights don't turn on. Do you think it would behave differently if connected to a windows machine?

    Kind regards,
    Martin

  • 0 in reply to macthestack

    Thanks for testing Martin. I will forward this info to our PPK2 team, and see what solution we can come up with. I will provide an answer within next week.

    Kind regards,
    Øyvind

Reply Children
Related