Porting an example from pca10056 to pca10056e (Segger embedded studio)

[RichardHdrd]

Dear ladies and gentlemen,

I found the following page giving instructions for porting an example from pca10056 to pca10056e:

https://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.sdk5.v15.3.0%2Fnrf52811_user_guide.html

I'm currently using Segger Embedded Studio (SES), but also would have a working toolchain for using gcc via Eclipse.

The first described step (2) for porting projects is stated to be:

"In the project settings, change to device "NordicSemiconductor->nRF52811_xxaa".

I failed to find that setting (as well for SES as Eclipse), maybe someone can help me out?

Without force, I'd fairly appreciate any further specific information/hint for either eclipse/gcc and/or SES considering the announced porting process on the referenced webpage concerning the named IDEs.

Furthermore;

I used (for peripheral examples) the tiny software device S112, but now the (ble-central) example projects only offer a S140 device.

Do I have to expect problems using the software device S140 on a pca10056e project based on hardware nRF58211, are there any advices or hints on how to proceed/what must be considered?

Best regards,

software device

[Vidar Berg]

Hello,

There is usually not a lot of differences between 'pca10056e' configuration and a 'pca10056' one. What I usually do when porting a project like this is to first make a copy of the existing pca10056 project and rename it to pca10056e, then I open the *emProject file in a text editor and update the device specific settings and startup files. I have circled around the fields that will differ between a pca10056e and a pca10056 project in the picture below.

Best regards,

Vidar

[RichardHdrd]

Hello Vidar,

Thank you for your advice. Sadly, the screenshots posted with your instruction are cut off right for some parameters. Would you be so kind as to re-post with complete parameter lines (especially the left part)?

Furthermore: from youre suggested config-modification, it seems that the used softdevice gets changed from S140 to S112?

Reading several threads, I concluded, that S112 is not suited for BLE scanning:

https://devzone.nordicsemi.com/f/nordic-q-a/29707/ble-scanning-with-nrf52810-and-s112

https://devzone.nordicsemi.com/f/nordic-q-a/52897/ble-scan-on-nrf52811

As my final platform is a BM833A using nrf52811, I think that the second thread advises to go with softdevice S140?

Is there a restriction for staying with S140?

Thanks in advance for any help,

Richard

[Vidar Berg]

Hello Richard,

I recommend you find another pca10056e project in the SDK and use that as a reference, I wouldn't be able to fit everything in a screenshot anyway.

[RichardHdrd]

Thank you again, I will do that.

Are there any known restrictions that prohibit the combination of using pca10056e and S140 as softdevice?