NRF52832 BLE Certification under ETSI EN 300 328 V2.2.2

[Lerche49]

Hello

We have developped a product with the nRF52832. Due to space restrictions we couldn't use the PCB antenna design from the nRF 52DK. We used an Johanson chip antenna instead. We would now make the regulatory RF tests of the complete system.  Our test house asks, if there is a newer test report (V2.2.2) available from a similar design like the nRF52 DK, so that they only need to measure the power and the spurious emission. Otherwise we have to make the complete certification according ETSI EN 300 328 V 2.2.2 which is quite costly.

I found the following in the devzone: The test report from the nRF52832 QFAA according ETSI EN 300 328 v. 1.9.1 (2015-02) and the following 3 topics:
NRF52832 BLE Certification under ETSI EN 300 328, Case ID: 127098
Test report - NRF52832 ETSI300328 v2.1.1 & FCC ID, Case ID: 222582
Report emission test NRF52832 (for CE marking), Case ID: 118103

Do you have a newer test report from a another design according ETSI EN 300 328 V 2.2.2?

Thank you and kind regards

Erich

[ketiljo]

Hi Erick

The only difference between V2.1.1 and V2.2.2 is the receiver blocking test. The test levels are different. All other tests and parameters are the same. So you should be able to get away with most from the V2.1.1

We don't have any newer reports for the nRF52-DK, sorry.

best regards,

Ketil Aas-Johansen