• State Verified Answer
  • Replies 1 reply
  • Subscribers 86 subscribers
  • Views 462 views
  • Users 0 members are here
Attachments (0)
Nordic Case Info
  • Case ID: 273027
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

nrf24 and bootloaders

BDSL

Hi there,

I have used the nrf2724 (radio module) as a prototyping platform. I am able to flash my personal program to the nrf24le1 on the nrf2724 and it functions properly. Now, I am getting my own boards made with an nrf24le1. I was wondering if I will need to program a bootloader to the nrf24le1 on my new development boards? Since I did not have to with the chip on the nrf2724, I would assume that I don't have to program a bootloader. Is this correct? Will I be able to just flash my personal program to these boards in the same way (via ISP)? Should I expect to be able to program the boards without a bootloader? The nrf24le1 only has one memory space so I am not sure how I would program a bootloader to it if it needs one.

Thanks!

Emma

Parents
  • +1

    Hi,

     

    Now, I am getting my own boards made with an nrf24le1. I was wondering if I will need to program a bootloader to the nrf24le1 on my new development boards? Since I did not have to with the chip on the nrf2724, I would assume that I don't have to program a bootloader. Is this correct? Will I be able to just flash my personal program to these boards in the same way (via ISP)? Should I expect to be able to program the boards without a bootloader? The nrf24le1 only has one memory space so I am not sure how I would program a bootloader to it if it needs one.

    Which bootloader are you referring to?

    You can choose to program the devices directly over ISP, with or without a bootloader. This is up to you and how your application should work.

     

    Kind regards,

    Håkon

Reply
  • +1

    Hi,

     

    Now, I am getting my own boards made with an nrf24le1. I was wondering if I will need to program a bootloader to the nrf24le1 on my new development boards? Since I did not have to with the chip on the nrf2724, I would assume that I don't have to program a bootloader. Is this correct? Will I be able to just flash my personal program to these boards in the same way (via ISP)? Should I expect to be able to program the boards without a bootloader? The nrf24le1 only has one memory space so I am not sure how I would program a bootloader to it if it needs one.

    Which bootloader are you referring to?

    You can choose to program the devices directly over ISP, with or without a bootloader. This is up to you and how your application should work.

     

    Kind regards,

    Håkon

Children
No Data
Related
Terms of service