ot-nrf52840 dfu trigger library

[Uyl]

I'm working with following project and would like to add the DFU trigger library.

https://github.com/openthread/ot-nrf528xx

1. Build like this, I'm using a PCA10059 Dongle

./script/build nrf52840 USB_trans -DOT_BOOTLOADER=USB

2. I create the hex File

arm-none-eabi-objcopy -O ihex ot-cli-ftd ot-cli-ftd.hex

3. I generate .Zip file for nrfutil

nrfutil pkg generate --debug-mode --hw-version 52 --sd-req 0x00 --application ot-cli-ftd.hex app_dfu_package.zip

4. I must press the reset button to get into Bootloader mode and load the Firmware.

nrfutil dfu usb-serial -pkg app_dfu_package.zip -p COM8

ERROR:

C:\Users\..Desktop\Nrfutil-Trigger-Test>nrfutil dfu usb-serial -pkg app_dfu_package.zip -p COM8
[------------------------------------] 0%2021-07-12 16:15:37,334 No trigger interface found for device with serial number: CFXXXXXXXX, Product ID: 0xCAFE and Vendor ID: 0x1915

How can I implement the DFU-Trigger library and how can I trigger it with nrfutil?

Output of ./script/build :

vscode ➜ /workspaces/ot-nrf528xx (main ✗) $ ./script/build nrf52840 USB_trans -DOT_BOOTLOADER=USB
+ OT_CMAKE_NINJA_TARGET=
+ NRF_PLATFORMS=(nrf52811 nrf52833 nrf52840)
+ readonly NRF_PLATFORMS
+ NRF_BUILD_TYPES=(UART_trans USB_trans SPI_trans_NCP soft_crypto soft_crypto_threading)
+ readonly NRF_BUILD_TYPES
++ pwd
+ readonly OT_SRCDIR=/workspaces/ot-nrf528xx
+ OT_SRCDIR=/workspaces/ot-nrf528xx
+ OT_OPTIONS=("-DCMAKE_BUILD_TYPE=MinSizeRel" "-DOT_PLATFORM=external" "-DOT_SLAAC=ON")
+ readonly OT_OPTIONS
+ main nrf52840 USB_trans -DOT_BOOTLOADER=USB
+ [[ 3 == 0 ]]
+ local platform=nrf52840
+ echo nrf52811 nrf52833 nrf52840
+ grep -wq nrf52840
+ [[ 3 == 1 ]]
+ local nrf_build_type=USB_trans
+ echo UART_trans USB_trans SPI_trans_NCP soft_crypto soft_crypto_threading
+ grep -wq USB_trans
+ shift
+ shift
+ local_options=()
+ local local_options
+ options=("${OT_OPTIONS[@]}")
+ local options
+ case "${platform}" in
+ local_options+=("-DCMAKE_TOOLCHAIN_FILE=src/${platform}/arm-none-eabi.cmake")
+ case "${nrf_build_type}" in
+ options+=("${local_options[@]}" "-DOT_USB=ON" "-DOT_EXTERNAL_MBEDTLS=nordicsemi-mbedtls")
+ options+=("$@")
+ build -DNRF_PLATFORM=nrf52840 -DCMAKE_BUILD_TYPE=MinSizeRel -DOT_PLATFORM=external -DOT_SLAAC=ON -DCMAKE_TOOLCHAIN_FILE=src/nrf52840/arm-none-eabi.cmake -DOT_USB=ON -DOT_EXTERNAL_MBEDTLS=nordicsemi-mbedtls -DOT_BOOTLOADER=USB
+ local builddir=build
+ mkdir -p build
+ cd build
+ cmake -GNinja -DOT_COMPILE_WARNING_AS_ERROR=ON -DNRF_PLATFORM=nrf52840 -DCMAKE_BUILD_TYPE=MinSizeRel -DOT_PLATFORM=external -DOT_SLAAC=ON -DCMAKE_TOOLCHAIN_FILE=src/nrf52840/arm-none-eabi.cmake -DOT_USB=ON -DOT_EXTERNAL_MBEDTLS=nordicsemi-mbedtls -DOT_BOOTLOADER=USB /workspaces/ot-nrf528xx
-- OpenThread Source Directory: /workspaces/ot-nrf528xx/openthread
-- OpenThread CMake build type: MinSizeRel
-- Package Name: OPENTHREAD
-- Setting default package version: thread-reference-20200818-1060-g681214da9
-- Package Version: thread-reference-20200818-1060-g681214da9
-- Configuring done
-- Generating done
-- Build files have been written to: /workspaces/ot-nrf528xx/build
+ [[ -n '' ]]
+ ninja
[29/113] cd /workspaces/ot-nrf528xx/build/openthread && /usr/bin/cmake -DLIST="OPENTHREAD_CONFIG_ASSER...eck.h";MBEDTLS_CONFIG_FILE="nrf-config.h"" -P /workspaces/ot-nrf528xx/openthread/etc/cmake/print.cmak
OPENTHREAD_CONFIG_ASSERT_ENABLE=1
OPENTHREAD_CONFIG_BACKBONE_ROUTER_DUA_NDPROXYING_ENABLE=0
OPENTHREAD_CONFIG_BACKBONE_ROUTER_MULTICAST_ROUTING_ENABLE=0
OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS=0
OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS_MANAGEMENT=1
OPENTHREAD_CONFIG_PING_SENDER_ENABLE=1
OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE=1
OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT=0
PACKAGE_NAME=OPENTHREAD
PACKAGE_VERSION=thread-reference-20200818-1060-g681214da9
OPENTHREAD_CONFIG_THREAD_VERSION=OT_THREAD_VERSION_1_2
OPENTHREAD_CONFIG_NCP_HDLC_ENABLE=1
OPENTHREAD_CONFIG_FILE=openthread-core-nrf52840-config.h
OPENTHREAD_PROJECT_CORE_CONFIG_FILE=openthread-core-nrf52840-config.h
OPENTHREAD_CORE_CONFIG_PLATFORM_CHECK_FILE=openthread-core-nrf52840-config-check.h
MBEDTLS_USER_CONFIG_FILE=nrf52840-mbedtls-config.h
USB_CDC_AS_SERIAL_TRANSPORT=1
APP_USBD_NRF_DFU_TRIGGER_ENABLED=1
OPENTHREAD_CORE_CONFIG_PLATFORM_CHECK_FILE=openthread-core-nrf52840-config-check.h
MBEDTLS_CONFIG_FILE=nrf-config.h
[113/113] Linking CXX executable bin/ot-ncp-ftd
+ cd /workspaces/ot-nrf528xx

[Charlie]

Hi Uyl,

Sorry, I do not fully understand your meaning before.

I did the following changes and it does work with nrfutil, but the issue is that you have to program this package first, then you would be able to use USB DFU buttonless triggering next time.

## src\nrf52833\transport-config.h ##
define USB_CDC_AS_SERIAL_TRANSPORT 1

## third_party\NordicSemiconductor\config\app_config.h ##

define APP_USBD_PID 0xC00A

define APP_USBD_NRF_DFU_TRIGGER_ENABLED 1

Your configuration should also work. The nrfutil command is the same as before:

sudo nrfutil dfu usb-serial -pkg app_dfu_package.zip -p /dev/ttyACM0
[####################################]  100%          
Device programmed.

I also experience error reports like below. Just try to wait a bit longer to program again. I guess sometimes it takes longer time to trigger DFU, but the nrfutil is timeout. Use "ls /dev/ttyACM*" to check you are always using the correct serial port.

Traceback (most recent call last):
  File "/usr/local/lib/python3.8/dist-packages/nordicsemi/dfu/dfu_transport_serial.py", line 197, in open
    self.__ensure_bootloader()
  File "/usr/local/lib/python3.8/dist-packages/nordicsemi/dfu/dfu_transport_serial.py", line 326, in __ensure_bootloader
    trigger.enter_bootloader_mode(device)
  File "/usr/local/lib/python3.8/dist-packages/nordicsemi/dfu/dfu_trigger.py", line 171, in enter_bootloader_mode
    libusb_device = self.select_device(listed_device)
  File "/usr/local/lib/python3.8/dist-packages/nordicsemi/dfu/dfu_trigger.py", line 134, in select_device
    SNO = handle.getSerialNumber()
  File "/usr/local/lib/python3.8/dist-packages/usb1/__init__.py", line 1154, in getSerialNumber
    return self.getASCIIStringDescriptor(
  File "/usr/local/lib/python3.8/dist-packages/usb1/__init__.py", line 1307, in getASCIIStringDescriptor
    received = mayRaiseUSBError(libusb1.libusb_get_string_descriptor_ascii(
  File "/usr/local/lib/python3.8/dist-packages/usb1/__init__.py", line 127, in mayRaiseUSBError
    __raiseUSBError(value)
  File "/usr/local/lib/python3.8/dist-packages/usb1/__init__.py", line 119, in raiseUSBError
    raise __STATUS_TO_EXCEPTION_DICT.get(value, __USBError)(value)
usb1.USBErrorTimeout: LIBUSB_ERROR_TIMEOUT [-7]

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/local/bin/nrfutil", line 8, in <module>
    sys.exit(cli())
  File "/usr/lib/python3/dist-packages/click/core.py", line 764, in __call__
    return self.main(*args, **kwargs)
  File "/usr/lib/python3/dist-packages/click/core.py", line 717, in main
    rv = self.invoke(ctx)
  File "/usr/lib/python3/dist-packages/click/core.py", line 1137, in invoke
    return _process_result(sub_ctx.command.invoke(sub_ctx))
  File "/usr/lib/python3/dist-packages/click/core.py", line 1137, in invoke
    return _process_result(sub_ctx.command.invoke(sub_ctx))
  File "/usr/lib/python3/dist-packages/click/core.py", line 956, in invoke
    return ctx.invoke(self.callback, **ctx.params)
  File "/usr/lib/python3/dist-packages/click/core.py", line 555, in invoke
    return callback(*args, **kwargs)
  File "/usr/local/lib/python3.8/dist-packages/nordicsemi/__main__.py", line 1014, in usb_serial
    do_serial(package, port, connect_delay, flow_control, packet_receipt_notification, baud_rate, serial_number, False,
  File "/usr/local/lib/python3.8/dist-packages/nordicsemi/__main__.py", line 970, in do_serial
    dfu.dfu_send_images()
  File "/usr/local/lib/python3.8/dist-packages/nordicsemi/dfu/dfu.py", line 127, in dfu_send_images
    self._dfu_send_image(self.manifest.application)
  File "/usr/local/lib/python3.8/dist-packages/nordicsemi/dfu/dfu.py", line 88, in _dfu_send_image
    self.dfu_transport.open()
  File "/usr/local/lib/python3.8/dist-packages/nordicsemi/dfu/dfu_transport_serial.py", line 203, in open
    ". Reason: {1}".format(self.com_port, e.strerror))
AttributeError: 'USBErrorTimeout' object has no attribute 'strerror'

Best regards,

Charlie