Failed to get flash device: MX25R64

[khodidas]

Hello,

I am using NCS 1.5.0 and modem firmware 1.2.3. 

I have nRF9160 DK version 1.0.0. 

I am trying to run "full_modem_update" example firmware on this. 

But getting below message on start up 

E: Device id 00 00 00 does not match config c2 28 17<CR><LF>
Device id 00 00 00 does not match config c2 28 17<CR><LF>
*** Booting Zephyr OS build v2.4.99-ncs1  ***<CR><LF>
HTTP full modem update sample started<CR><LF>
Failed to get flash device: MX25R64<CR><LF>

I have programmed nRF52840 with 0.19 pin set as below (I have modified SDK 17.0.2 "ble_app_templete" example firmware)

int main(void)
{
    bool erase_bonds;

    // Initialize.
    //log_init();
	nrf_gpio_cfg_output(19);
	nrf_gpio_pin_set(19);		
    //timers_init();
    //buttons_leds_init(&erase_bonds);
    //power_management_init();
    //ble_stack_init();
    //gap_params_init();
    //gatt_init();
    //advertising_init();
    //services_init();
    //conn_params_init();
    //peer_manager_init();

    // Start execution.
    //NRF_LOG_INFO("Template example started.");
    //application_timers_start();

    //advertising_start(erase_bonds);
	


    // Enter main loop.
    for (;;)
    {
        //idle_state_handle();
    }
}

can you help me in resolving this issue ?

Regards,

Smitesh Mali

[Didrik Rokhaug]

Hi,

A better way to handle the board controller would be to use an NCS sample (e.g. Zephyr's hello_world), and configure the board controller through the device tree by adding this overlay file:

nrf9160dk_nrf52840.overlay

Remember that the samples has to be built for the 1.0.0 board revision.

Here is a precompiled .hex for the board controller:

board_controller.hex

Best regards,

Didrik

[khodidas]

Hi Didrik,

I programmed the nRF52840 using the hex file you have attached.

But getting same issue. 

Regards,

Smitesh Mali

[khodidas]

Hi,

Can you help me out in this ?

Regards,

Smitesh Mali

[Simon]

Hello Smithesh Mali,

Have you been able to make any progress here lately?

Best regards,

Simon