Serial DFU with nRF9160 as DFU controller

[esisk]

I'm downloading a firmware image from AWS via cell onto the nRF9160. I want to perform a serial DFU over UART. The DFU target is the nRF52840. Are there any existing samples outlining this process?

[Hung Bui]

Hi Ethan, 

Could you let me know more about what firmware running on the nRF52840 ? 
If it's running NCS , please have a look at this case: https://devzone.nordicsemi.com/support-private/support/269959

ould you try to test using the repo that Simon pointed to in the case. 

Simon is on vacation  but here is the instruction I got from him: 

• cd into <..>\nrf\samples\other\test_lte_uart_dfu_lib and run
  • west build -b nrf52840_pca10090 && west flash
• Set SW5 to nRF91
• cd into <..>\nrf\samples\nrf9160\http_application_update and run
  • west build -b nrf9160_pca10090ns && west flash
• Wait till you see the following log from the 9160: "Press Button 1 to start the FOTA download", then press Button 1 on the 91 DK
• When you see the log "UART DFU transmission complete" in the log from the 9160 and the logging from the 52840 stops up (I forgot to enable log on the 52840 side signifying that the DFU was finished) do the following:
  • Set SW5 to nRF52
  • Press the RESET Button on the 91 DK
• If everything works as expected, you will see the following log:

Text

 *** Booting Zephyr OS build v2.1.99-ncs1 **

[00:00:00.120,208] [1B][0m<inf> mcuboot: Starting bootloader[1B][0m

[00:00:00.126,312] [1B][0m<inf> mcuboot: Primary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3[1B][0m

[00:00:00.136,108] [1B][0m<inf> mcuboot: Boot source: none[1B][0m[00:00:00.141,479] [1B][0m<inf> mcuboot: Swap type: test[1B][0m

[00:00:02.377,655] [1B][0m<inf> mcuboot: Bootloader chainload address offset: 0xc000[1B][0m

[00:00:02.385,162] [1B][0m<inf> mcuboot: Jumping to the first image slot[1B][0m

** Booting Zephyr OS build v2.1.99-ncs1 ***Hello world! nrf52840_pca10090

[esisk]

Hey Hung, I switched our toolchain over to NCS and I was wondering if you could re-answer my original question based on that. I can't view the link you sent in your original response because it's a private ticket.

[esisk]

When building this, should I clone the repository into my current ncs directory? I have it cloned outside right now and getting issues with west build

[Hung Bui]

Hi Ethan, 
You should clone it to the NCS v1.4.0. 

Or you can look at these 2 commits to know what has been modified: 
https://github.com/plskeggs/sdk-nrf/commit/6baf0e006299bb69152cf3fb7e690985cdcbcb3b

https://github.com/plskeggs/sdk-nrf/commit/4c276b8107e003a3083b9ba17569d768670d39f2

[esisk]

Thanks Hung, do you think trying to use this code is going to be an issue if we're using NCS v1.5.1?

[Hung Bui]

I would suggest to try testing the code with v1.4.0 first and after you get it running, you can study the code and try to port it to v1.5.1.

I'm not very familiar with the code but I think it's better to try step by step. 

[esisk]

Thanks!