Bluetooth mesh opcode handler callback no RSSI

[86s9f5w8]

Hello,

We are trying to read a received RSSI value from bluetooth mesh opcode handler however it does not relay this value to the callback.

Callback is added here.

Network core is flashed with hci_rpmsg application and application core with mesh_demo with slight tweaks such as sending a package every 250ms.

Development setup:

OS: Linux Mint 20.2

HW revision: NRF5340_xxAA_ENGD

SW revision: Zephyr 2.5-2.6.99

Thanks in advance.

[Hung Bui]

Hi Niklas, 

Could you please describe how you tested this ? 
What was the target address you set when you send the OP_VENDOR_BUTTON message ? 
If you are sending the message to the node it self you won't be able to see any RSSI (RSSI = 0 ) it's because the message is forwarded internally and not sending over the radio. 

So to test this you need to send the message to another node/board with different Unicast address. 

[86s9f5w8]

It turns out I had the same node address for multiple nodes. After changing it to different on another node I got these RSSI values I was looking for.

Thanks for your help!