nrf9160DK : How to modify mcuboot_primary & mcuboot_secondary partition ?

[JohnChiang]

Hello

We want modify mcuboot_primary and mcuboot_secondary partition.

mcuboot_primary end_address change to 0x70000 and size change to 0x60000.

mcuboot_secondary end_address change to 0xD0000 and size change to 0x60000.

Please help us to do the change.

Thanks

Our original partitions.yml

mcuboot_primary:
  address: 0x10000
  end_address: 0x80000
  orig_span: &id001
  - app
  - spm
  - mcuboot_pad
  region: flash_primary
  sharers: 0x1
  size: 0x70000
  span: *id001

mcuboot_secondary:
  address: 0x80000
  end_address: 0xf0000
  placement:
    after:
    - mcuboot_primary
    align:
      start: 0x8000
  region: flash_primary
  share_size:
  - mcuboot_primary
  size: 0x70000

[ovrebekk]

Hi

Sorry for the slow response to this case. 

If you haven't already I would recommend reading through the blog post written by Jimmy Wong on how to set up mcuboot:
https://jimmywongiot.com/2021/05/26/overview-on-mcuboot-zephyr-rtos/

If you scroll down a bit he describes how you can configure the partition manager by adding a file called pm_static.yml to your project, where you define the partition addresses like you are trying to do. 

Best regards
Torbjørn