• State Not Answered
  • Replies 7 replies
  • Subscribers 87 subscribers
  • Views 4036 views
  • Users 0 members are here
Attachments (1) Download All
Nordic Case Info
  • Case ID: 275935
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts

nRF Command Line Tools 10.13.0, 10.12.0 missing JLinkARM.dll

tedhavelka

Hello Nordic Devzone Community,

I'm having some trouble install nRF Command Line Tools on a 64-bit Linux host. From Nordic's page www.nordicsemi.com/.../download I've downloaded version 10.13.0, and then 10.12.0. SHA256 sums verify correctly. For some reason 10.14.0 is not available even though there is a selectable radio button for this version. These tools install in /opt. Updating my $PATH variable I can confirm the version of nrfjprog which is now installed:

$ nrfjprog --version

nrfjprog version: 10.12.2

JLinkARM.dll version: 6.88a

When I attempt to program a Zephyr app to a sparkfun_thing_plus_nrf9160 development board, I keep seeing the error message "JLinkARM.dll . . .  JLINK_OpenEx(...) failed to open DLL".

Both 10.13.0 and 10.12.0 show this behavior.  When working in a Linux environment is it not correct to follow the install steps?:

   *  unzip nRF-Command-Line-Tools_10_12_2_Linux-amd64.zip

   *  tar xvzf nRF-Command-Line-Tools_10_12_2_Linux-amd64.tar.gz

   *  sudo dpkg -i JLink_Linux_V750a_x86_64.deb   nRF-Command-Line-Tools_10_13_0_Linux-amd64.deb

Dragging and dropping full log file here . . .

- Ted

Fullscreen 0028.log.log Download 
# Attempting to run nrfjprog version 10.13.0:
[2021-Sept-02 19:03:48] [ info] --------------------------------------------------------------------------------
[2021-Sept-02 19:03:48] [ info] nrfjprog --program /home/guest/embedded/z1-sandbox-2021-08-26/kionix-driver-demo/build/zephyr/merged.hex --sectorerase -f NRF91 --snr 59104091 --log 
[2021-Sept-02 19:03:48] [ info] nrfjprog version 10.13.0 
[2021-Sept-02 19:03:48] [ info] --------------------------------------------------------------------------------
[2021-Sept-02 19:03:48] [ info] Load library at /opt/nrfjprog/libnrfjprogdll.so.
[2021-Sept-02 19:03:48] [ info] Library loaded, loading member functions.
[2021-Sept-02 19:03:48] [ info] Member functions succesfully loaded.
[2021-Sept-02 19:03:48] [debug] [ Client] - open
[2021-Sept-02 19:03:48] [debug] [ Client] - start
[2021-Sept-02 19:03:48] [trace] [ Client] - Command open executed for 1 milliseconds with result 0
[2021-Sept-02 19:03:48] [debug] [ Client] - enum_emu_snr
[2021-Sept-02 19:03:48] [ info] [ Client] - stdout: Jlinkarm nRF Worker ready. Handling sequence cc8adcde-97e5-4128-959c-77aec6ea0e82.
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - Logger sink registered in Segger backend logger
[2021-Sept-02 19:03:48] [debug] [  JLink] - Logger sink registered in JLink logger
[2021-Sept-02 19:03:48] [debug] [  nRF91] - open
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - open_dll
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - No J-Link DLL path was provided. Attempting to auto detect.
[2021-Sept-02 19:03:48] [ info] [SeggerBackend] - Load library at /opt/SEGGER/JLink/libjlinkarm.so.7.
[2021-Sept-02 19:03:48] [ info] [SeggerBackend] - Library loaded, loading member functions.
[2021-Sept-02 19:03:48] [ info] [SeggerBackend] - Member functions succesfully loaded.
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - dll_version
[2021-Sept-02 19:03:48] [ info] [SeggerBackend] - Segger dll version 7.50.a loaded.
[2021-Sept-02 19:03:48] [trace] [ Worker] - Command open executed for 1 milliseconds with result 0
[2021-Sept-02 19:03:48] [debug] [  nRF91] - enum_emu_snr
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - enum_emu_snr
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - ---just_enum_emu_snr
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - ---just_get_num_emus
[2021-Sept-02 19:03:48] [trace] [ Client] - Command enum_emu_snr executed for 88 milliseconds with result 0
[2021-Sept-02 19:03:48] [debug] [ Client] - connect_to_emu_with_snr
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:03:48] [trace] [ Worker] - Command enum_emu_snr executed for 88 milliseconds with result 0
[2021-Sept-02 19:03:48] [debug] [  nRF91] - connect_to_emu_with_snr
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - connect_to_emu_with_snr
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - ---just_enum_emu_snr
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - ---just_get_num_emus
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - ---just_connect_to_emu_with_snr
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - ---just_connect_to_emu_without_snr
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - Segger logging enabled.
[2021-Sept-02 19:03:48] [trace] [  JLink] -    ***** Error: 
[2021-Sept-02 19:03:48] [trace] [  JLink] - Cannot connect to J-Link.
[2021-Sept-02 19:03:48] [trace] [  JLink] - - 73.444ms returns "Cannot connect to J-Link."  
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:03:48] [error] [SeggerBackend] - JLinkARM.dll Open returned error 'Cannot connect to J-Link.'
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_OpenEx(...)  
[2021-Sept-02 19:03:48] [trace] [  JLink] - - 67.289ms returns "Failed to open DLL"  
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:03:48] [error] [SeggerBackend] - JLinkARM.dll Open returned error 'Failed to open DLL'
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_OpenEx(...)  
[2021-Sept-02 19:03:48] [trace] [  JLink] - - 62.642ms returns "Failed to open DLL"  
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:03:48] [error] [SeggerBackend] - JLinkARM.dll Open returned error 'Failed to open DLL'
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_OpenEx(...)  
[2021-Sept-02 19:03:48] [trace] [  JLink] - - 60.873ms returns "Failed to open DLL"  
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:03:48] [error] [SeggerBackend] - JLinkARM.dll Open returned error 'Failed to open DLL'
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_OpenEx(...)  
[2021-Sept-02 19:03:48] [trace] [ Client] - Command connect_to_emu_with_snr executed for 448 milliseconds with result -102
[2021-Sept-02 19:03:48] [trace] [  JLink] - - 61.803ms returns "Failed to open DLL"  
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:03:48] [error] [SeggerBackend] - JLinkARM.dll Open returned error 'Failed to open DLL'
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_IsOpen()  
[2021-Sept-02 19:03:48] [trace] [  JLink] - - 0.002ms returns 0x00  
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:03:48] [trace] [ Worker] - Command connect_to_emu_with_snr executed for 448 milliseconds with result -102
[2021-Sept-02 19:03:48] [debug] [  nRF91] - close
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - is_connected_to_device
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_IsOpen()  
[2021-Sept-02 19:03:48] [trace] [  JLink] - - 0.003ms returns 0x00  
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:03:48] [error] [SeggerBackend] - Cannot call is_connected_to_device when connect_to_emu_without_snr or connect_to_emu_with_snr has not been called.
[2021-Sept-02 19:03:48] [debug] [  nRF91] - close
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_IsOpen()  
[2021-Sept-02 19:03:48] [trace] [  JLink] - - 0.003ms returns 0x00  
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - close
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - disconnect_from_emu
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_IsOpen()  
[2021-Sept-02 19:03:48] [trace] [  JLink] - - 0.002ms returns 0x00  
[2021-Sept-02 19:03:48] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:03:48] [debug] [SeggerBackend] - Segger Backend closed.
[2021-Sept-02 19:03:48] [debug] [  nRF91] - nRF family DLL closed
[2021-Sept-02 19:03:48] [trace] [ Client] - Command close executed for 10 milliseconds with result 0
[2021-Sept-02 19:03:48] [debug] [ Client] - terminate
[2021-Sept-02 19:03:48] [trace] [ Client] - Command terminate executed for 0 milliseconds with result 0
[2021-Sept-02 19:03:48] [trace] [ Worker] - Command close executed for 10 milliseconds with result 0
[2021-Sept-02 19:03:48] [trace] [ Worker] - Command terminate executed for 0 milliseconds with result 0
[2021-Sept-02 19:03:48] [trace] [ Worker] - Executed 5 commands for 547 milliseconds
[2021-Sept-02 19:03:48] [debug] [ Client] - Child process terminated with result 0
[2021-Sept-02 19:03:48] [trace] [ Client] - Executed 5 commands for 547 milliseconds
[2021-Sept-02 19:03:48] [debug] [ Client] - terminate
[2021-Sept-02 19:04:11] [ info] --------------------------------------------------------------------------------
[2021-Sept-02 19:04:11] [ info] nrfjprog --program /home/guest/embedded/z1-sandbox-2021-08-26/kionix-driver-demo/build/zephyr/merged.hex --sectorerase -f NRF91 --snr 59104091 --log 
[2021-Sept-02 19:04:11] [ info] nrfjprog version 10.13.0 
[2021-Sept-02 19:04:11] [ info] --------------------------------------------------------------------------------
[2021-Sept-02 19:04:11] [ info] Load library at /opt/nrfjprog/libnrfjprogdll.so.
[2021-Sept-02 19:04:11] [ info] Library loaded, loading member functions.
[2021-Sept-02 19:04:11] [ info] Member functions succesfully loaded.
[2021-Sept-02 19:04:11] [debug] [ Client] - open
[2021-Sept-02 19:04:11] [debug] [ Client] - start
[2021-Sept-02 19:04:11] [ info] [ Client] - stdout: Jlinkarm nRF Worker ready. Handling sequence 43b41f67-8448-4058-99c1-6890dcc6aed3.
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - Logger sink registered in Segger backend logger
[2021-Sept-02 19:04:11] [debug] [  JLink] - Logger sink registered in JLink logger
[2021-Sept-02 19:04:11] [debug] [  nRF91] - open
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - open_dll
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - No J-Link DLL path was provided. Attempting to auto detect.
[2021-Sept-02 19:04:11] [ info] [SeggerBackend] - Load library at /opt/SEGGER/JLink/libjlinkarm.so.7.
[2021-Sept-02 19:04:11] [trace] [ Client] - Command open executed for 32 milliseconds with result 0
[2021-Sept-02 19:04:11] [debug] [ Client] - enum_emu_snr
[2021-Sept-02 19:04:11] [ info] [SeggerBackend] - Library loaded, loading member functions.
[2021-Sept-02 19:04:11] [ info] [SeggerBackend] - Member functions succesfully loaded.
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - dll_version
[2021-Sept-02 19:04:11] [ info] [SeggerBackend] - Segger dll version 7.50.a loaded.
[2021-Sept-02 19:04:11] [trace] [ Worker] - Command open executed for 32 milliseconds with result 0
[2021-Sept-02 19:04:11] [debug] [  nRF91] - enum_emu_snr
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - enum_emu_snr
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - ---just_enum_emu_snr
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - ---just_get_num_emus
[2021-Sept-02 19:04:11] [trace] [ Client] - Command enum_emu_snr executed for 77 milliseconds with result 0
[2021-Sept-02 19:04:11] [debug] [ Client] - connect_to_emu_with_snr
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:04:11] [trace] [ Worker] - Command enum_emu_snr executed for 77 milliseconds with result 0
[2021-Sept-02 19:04:11] [debug] [  nRF91] - connect_to_emu_with_snr
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - connect_to_emu_with_snr
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - ---just_enum_emu_snr
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - ---just_get_num_emus
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - ---just_connect_to_emu_with_snr
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - ---just_connect_to_emu_without_snr
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - Segger logging enabled.
[2021-Sept-02 19:04:11] [trace] [  JLink] -    ***** Error: 
[2021-Sept-02 19:04:11] [trace] [  JLink] - Cannot connect to J-Link.
[2021-Sept-02 19:04:11] [trace] [  JLink] - - 74.589ms returns "Cannot connect to J-Link."  
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:04:11] [error] [SeggerBackend] - JLinkARM.dll Open returned error 'Cannot connect to J-Link.'
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_OpenEx(...)  
[2021-Sept-02 19:04:11] [trace] [  JLink] - - 64.085ms returns "Failed to open DLL"  
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:04:11] [error] [SeggerBackend] - JLinkARM.dll Open returned error 'Failed to open DLL'
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_OpenEx(...)  
[2021-Sept-02 19:04:11] [trace] [  JLink] - - 60.535ms returns "Failed to open DLL"  
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:04:11] [error] [SeggerBackend] - JLinkARM.dll Open returned error 'Failed to open DLL'
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_OpenEx(...)  
[2021-Sept-02 19:04:11] [trace] [  JLink] - - 65.709ms returns "Failed to open DLL"  
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:04:11] [error] [SeggerBackend] - JLinkARM.dll Open returned error 'Failed to open DLL'
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_OpenEx(...)  
[2021-Sept-02 19:04:11] [trace] [ Client] - Command connect_to_emu_with_snr executed for 463 milliseconds with result -102
[2021-Sept-02 19:04:11] [trace] [  JLink] - - 59.516ms returns "Failed to open DLL"  
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:04:11] [error] [SeggerBackend] - JLinkARM.dll Open returned error 'Failed to open DLL'
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_IsOpen()  
[2021-Sept-02 19:04:11] [trace] [  JLink] - - 0.003ms returns 0x00  
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:04:11] [trace] [ Worker] - Command connect_to_emu_with_snr executed for 463 milliseconds with result -102
[2021-Sept-02 19:04:11] [debug] [  nRF91] - close
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - is_connected_to_device
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_IsOpen()  
[2021-Sept-02 19:04:11] [trace] [  JLink] - - 0.004ms returns 0x00  
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:04:11] [error] [SeggerBackend] - Cannot call is_connected_to_device when connect_to_emu_without_snr or connect_to_emu_with_snr has not been called.
[2021-Sept-02 19:04:11] [debug] [  nRF91] - close
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_IsOpen()  
[2021-Sept-02 19:04:11] [trace] [  JLink] - - 0.003ms returns 0x00  
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - close
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - disconnect_from_emu
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - is_connected_to_emu
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_IsOpen()  
[2021-Sept-02 19:04:11] [trace] [  JLink] - - 0.003ms returns 0x00  
[2021-Sept-02 19:04:11] [trace] [  JLink] - JLINK_HasError()  
[2021-Sept-02 19:04:11] [debug] [SeggerBackend] - Segger Backend closed.
[2021-Sept-02 19:04:11] [debug] [  nRF91] - nRF family DLL closed
[2021-Sept-02 19:04:11] [trace] [ Client] - Command close executed for 10 milliseconds with result 0
[2021-Sept-02 19:04:11] [debug] [ Client] - terminate
[2021-Sept-02 19:04:11] [trace] [ Client] - Command terminate executed for 0 milliseconds with result 0
[2021-Sept-02 19:04:11] [trace] [ Worker] - Command close executed for 10 milliseconds with result 0
[2021-Sept-02 19:04:11] [trace] [ Worker] - Command terminate executed for 0 milliseconds with result 0
[2021-Sept-02 19:04:11] [trace] [ Worker] - Executed 5 commands for 582 milliseconds
[2021-Sept-02 19:04:11] [debug] [ Client] - Child process terminated with result 0
[2021-Sept-02 19:04:11] [trace] [ Client] - Executed 5 commands for 582 milliseconds
[2021-Sept-02 19:04:11] [debug] [ Client] - terminate


# Attemping to flash sparkfun_thing_plus_nrf9160 board with nrfjprog version 10.12.0:
[2021-Sept-02 19:51:51] [ info] --------------------------------------------------------------------------------
[2021-Sept-02 19:51:51] [ info] nrfjprog --program /home/cpguest/embedded/z1-sandbox-2021-08-26/kionix-driver-demo/build/zephyr/merged.hex --sectorerase -f NRF91 --snr 59104091 --log 
[2021-Sept-02 19:51:51] [ info] nrfjprog version 10.12.2 
[2021-Sept-02 19:51:51] [ info] --------------------------------------------------------------------------------
[2021-Sept-02 19:51:51] [debug] [ nRF0x0] - open_dll
[2021-Sept-02 19:51:51] [ info] [ nRF0x0] - Load library at /opt/nrfjprog/libjlinkarm_nrf91_nrfjprogdll.so.
[2021-Sept-02 19:51:51] [ info] [ nRF0x0] - Library loaded, loading member functions.
[2021-Sept-02 19:51:51] [ info] [ nRF0x0] - Member functions succesfully loaded.
[2021-Sept-02 19:51:51] [ info] [Backend] - Logger callback at 0x564fa3bb4150 registered in Segger backend logger.
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] Logger callback at 0x564fa3bb4150 registered in JLink logger.
[2021-Sept-02 19:51:51] [debug] [nRF910x0] - open
[2021-Sept-02 19:51:51] [debug] [Backend] - open_dll
[2021-Sept-02 19:51:51] [ info] [Backend] - No J-Link DLL path was provided. Attempting to auto detect.
[2021-Sept-02 19:51:51] [ info] [Backend] - Load library at /opt/SEGGER/JLink/libjlinkarm.so.6.88.1.
[2021-Sept-02 19:51:51] [ info] [Backend] - Library loaded, loading member functions.
[2021-Sept-02 19:51:51] [ info] [Backend] - Member functions succesfully loaded.
[2021-Sept-02 19:51:51] [debug] [Backend] - dll_version
[2021-Sept-02 19:51:51] [ info] [Backend] - Segger dll version 6.88.a loaded.
[2021-Sept-02 19:51:51] [debug] [ nRF0x0] - enum_emu_snr
[2021-Sept-02 19:51:51] [debug] [nRF910x0] - enum_emu_snr
[2021-Sept-02 19:51:51] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:51:51] [debug] [Backend] - enum_emu_snr
[2021-Sept-02 19:51:51] [debug] [Backend] - ---just_enum_emu_snr
[2021-Sept-02 19:51:51] [debug] [Backend] - ---just_get_num_emus
[2021-Sept-02 19:51:51] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:51:51] [debug] [ nRF0x0] - connect_to_emu_with_snr
[2021-Sept-02 19:51:51] [debug] [nRF910x0] - connect_to_emu_with_snr
[2021-Sept-02 19:51:51] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:51:51] [debug] [Backend] - connect_to_emu_with_snr
[2021-Sept-02 19:51:51] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:51:51] [debug] [Backend] - ---just_enum_emu_snr
[2021-Sept-02 19:51:51] [debug] [Backend] - ---just_get_num_emus
[2021-Sept-02 19:51:51] [debug] [Backend] - ---just_connect_to_emu_with_snr
[2021-Sept-02 19:51:51] [debug] [Backend] - ---just_connect_to_emu_without_snr
[2021-Sept-02 19:51:51] [ info] [Backend] - Segger logging enabled.
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ]    ***** Error: 
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] Cannot connect to J-Link.
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] - 71.584ms returns "Cannot connect to J-Link."  
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_HasError()  
[2021-Sept-02 19:51:51] [ info] [Backend] - JLinkARM.dll Open returned error 'Cannot connect to J-Link.'
[2021-Sept-02 19:51:51] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_IsOpen()  
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] - 0.003ms returns 0x00  
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_HasError()  
[2021-Sept-02 19:51:51] [debug] [ nRF0x0] - close_dll
[2021-Sept-02 19:51:51] [debug] [nRF910x0] - close
[2021-Sept-02 19:51:51] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_IsOpen()  
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] - 0.003ms returns 0x00  
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_HasError()  
[2021-Sept-02 19:51:51] [debug] [Backend] - close
[2021-Sept-02 19:51:51] [debug] [Backend] - disconnect_from_emu
[2021-Sept-02 19:51:51] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_IsOpen()  
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] - 0.004ms returns 0x00  
[2021-Sept-02 19:51:51] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_HasError()  
[2021-Sept-02 19:51:51] [debug] [Backend] - Segger Backend closed.
[2021-Sept-02 19:51:51] [debug] [nRF910x0] - nRF family DLL closed


# Preceding last command with `sudo`:
[2021-Sept-02 19:53:48] [ info] --------------------------------------------------------------------------------
[2021-Sept-02 19:53:48] [ info] nrfjprog --program /home/cpguest/embedded/z1-sandbox-2021-08-26/kionix-driver-demo/build/zephyr/merged.hex --sectorerase -f NRF91 --snr 59104091 --log 
[2021-Sept-02 19:53:48] [ info] nrfjprog version 10.12.2 
[2021-Sept-02 19:53:48] [ info] --------------------------------------------------------------------------------
[2021-Sept-02 19:53:48] [debug] [ nRF0x0] - open_dll
[2021-Sept-02 19:53:48] [ info] [ nRF0x0] - Load library at /opt/nrfjprog/libjlinkarm_nrf91_nrfjprogdll.so.
[2021-Sept-02 19:53:48] [ info] [ nRF0x0] - Library loaded, loading member functions.
[2021-Sept-02 19:53:48] [ info] [ nRF0x0] - Member functions succesfully loaded.
[2021-Sept-02 19:53:48] [ info] [Backend] - Logger callback at 0x55b2a6497150 registered in Segger backend logger.
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] Logger callback at 0x55b2a6497150 registered in JLink logger.
[2021-Sept-02 19:53:48] [debug] [nRF910x0] - open
[2021-Sept-02 19:53:48] [debug] [Backend] - open_dll
[2021-Sept-02 19:53:48] [ info] [Backend] - No J-Link DLL path was provided. Attempting to auto detect.
[2021-Sept-02 19:53:48] [ info] [Backend] - Load library at /opt/SEGGER/JLink/libjlinkarm.so.6.88.1.
[2021-Sept-02 19:53:48] [ info] [Backend] - Library loaded, loading member functions.
[2021-Sept-02 19:53:48] [ info] [Backend] - Member functions succesfully loaded.
[2021-Sept-02 19:53:48] [debug] [Backend] - dll_version
[2021-Sept-02 19:53:48] [ info] [Backend] - Segger dll version 6.88.a loaded.
[2021-Sept-02 19:53:48] [debug] [ nRF0x0] - enum_emu_snr
[2021-Sept-02 19:53:48] [debug] [nRF910x0] - enum_emu_snr
[2021-Sept-02 19:53:48] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:53:48] [debug] [Backend] - enum_emu_snr
[2021-Sept-02 19:53:48] [debug] [Backend] - ---just_enum_emu_snr
[2021-Sept-02 19:53:48] [debug] [Backend] - ---just_get_num_emus
[2021-Sept-02 19:53:48] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:53:48] [debug] [ nRF0x0] - connect_to_emu_with_snr
[2021-Sept-02 19:53:48] [debug] [nRF910x0] - connect_to_emu_with_snr
[2021-Sept-02 19:53:48] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:53:48] [debug] [Backend] - connect_to_emu_with_snr
[2021-Sept-02 19:53:48] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:53:48] [debug] [Backend] - ---just_enum_emu_snr
[2021-Sept-02 19:53:48] [debug] [Backend] - ---just_get_num_emus
[2021-Sept-02 19:53:48] [debug] [Backend] - ---just_connect_to_emu_with_snr
[2021-Sept-02 19:53:48] [debug] [Backend] - ---just_connect_to_emu_without_snr
[2021-Sept-02 19:53:48] [ info] [Backend] - Segger logging enabled.
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ]    ***** Error: 
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] Cannot connect to J-Link.
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] - 83.261ms returns "Cannot connect to J-Link."  
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_HasError()  
[2021-Sept-02 19:53:48] [ info] [Backend] - JLinkARM.dll Open returned error 'Cannot connect to J-Link.'
[2021-Sept-02 19:53:48] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_IsOpen()  
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] - 0.016ms returns 0x00  
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_HasError()  
[2021-Sept-02 19:53:48] [debug] [ nRF0x0] - close_dll
[2021-Sept-02 19:53:48] [debug] [nRF910x0] - close
[2021-Sept-02 19:53:48] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_IsOpen()  
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] - 0.016ms returns 0x00  
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_HasError()  
[2021-Sept-02 19:53:48] [debug] [Backend] - close
[2021-Sept-02 19:53:48] [debug] [Backend] - disconnect_from_emu
[2021-Sept-02 19:53:48] [debug] [Backend] - is_connected_to_emu
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_IsOpen()  
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] - 0.015ms returns 0x00  
[2021-Sept-02 19:53:48] [ info] [  JLink] - [Info    ] [JLink     ] JLINK_HasError()  
[2021-Sept-02 19:53:48] [debug] [Backend] - Segger Backend closed.
[2021-Sept-02 19:53:48] [debug] [nRF910x0] - nRF family DLL closed

Parents
  • 0

    Forgot to mention, from within my Zephyr app I originally invoked `west flash`, which generated the longer command to flash firmware.  That generated command string contains the serial number of the Segger JLink programmer I am using.  This is happening within a VirtualBox based Ubuntu 20.04 LTS host.  Having made the Segger JLink USB device available to the virtual machine, I see that my JLink's serial number is detected the same in both the host OS and the guest OS.

Reply
  • 0

    Forgot to mention, from within my Zephyr app I originally invoked `west flash`, which generated the longer command to flash firmware.  That generated command string contains the serial number of the Segger JLink programmer I am using.  This is happening within a VirtualBox based Ubuntu 20.04 LTS host.  Having made the Segger JLink USB device available to the virtual machine, I see that my JLink's serial number is detected the same in both the host OS and the guest OS.

Children
No Data
Related
Terms of service