• State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 74 subscribers
  • Views 593 views
  • Users 0 members are here
Attachments (1) Download All
Nordic Case Info
  • Case ID: 276512
Options
This post is older than 2 years and might not be relevant anymore
More Info: Consider searching for newer posts
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware verification nRF52840 custom BLE Board

Moghees

Hi,

We are design custom Board using nRF52840 SOC.

  1. We are operating it in Normal mode, using internal DCDC converter
  2. We have used configuration 5 from reference design
  3. From reference design we have removed NFC pins connection and USB connection because we do not need it in our design
  4. We will be programing our custom board using nRF52840 DK
  5. We have attach led using load switch at P0.15
  6. We have attach buzzer using load switch at P0.16
  7. We have attach button at P0.24
  8. We have attach reset button at pin P0.18/RESET

I have imported altium design file to EAsyeda Software. I am not sure if in imported reference design there is something missing. I have to change footprint for component in reference design as well. I am attaching the zip file containing Easyeda schematic and PCBfile files for our board can you verify it if it is correct or I am missing something

You can view Schematics and PCB file using following online version of Easyeda: Easyeda Online version
Thanks in advance

2538.Final.zip

Regards,

Moghees Bin Zahid

Related
Terms of service