In reference to 'Need interface MCU initial boot firmware' ticket filed yesterday

[jeffd]

https://devzone.nordicsemi.com/f/nordic-q-a/79832/need-interface-mcu-initial-boot-firmware

apparently i can't update it anymore.  does 'engineer assigned' mean that it can't get updated by the submitter?

anyways, figured out this a.m. that at least someone's got their act together, i'm able to flash the DAPLink firmware to the DK (using their bootloader at least).  the operation works as i would've expected the Nordic/Segger firmware to:
boot into SAM-BA by pulling the ERASE pin high while applying power, use the SAM-BA Tcl interface to flash the DAPLink bootloader.  this will show up as MAINTENANCE drive, drag and drop the DAPLink FW to the drive and it will flash and reboot and you will *magically* get the DAPLINK drive as well as the virtual com port, etc.

[Einar Thorsrud]

Hi,

apparently i can't update it anymore.  does 'engineer assigned' mean that it can't get updated by the submitter?

You should still be able to update the thread.

Regarding the main topic I suggest we continue in the other thread.