Hey all
Board:
NRF53840 DK
ERROR:
Building ‘zephyr/zephyr_prebuilt.elf’ from solution ‘build’ in configuration ‘Common’
undefined reference to `LOG_DBG' (to any area that uses it) <error appears in hci_core.c>
steps i've taken:
1) https://docs.zephyrproject.org/latest/reference/kconfig/CONFIG_BT_LOG_LEVEL_DBG.html
2) Menu path: (Top) → Sub Systems and OS Services → Bluetooth → Max compiled-in log level for bt
3) change to debug for both the network and applicaiton kconfig
4) also changed my kconfig overlay file to add it all in
# BEGIN Configurations from basic/minimal CONFIG_NCS_SAMPLES_DEFAULTS=y CONFIG_BT=y CONFIG_BT_PERIPHERAL=y CONFIG_BT_DEVICE_NAME="Nordic_LBS" ##################################### # Enable the LBS service CONFIG_BT_LBS=y CONFIG_BT_LBS_POLL_BUTTON=y CONFIG_DK_LIBRARY=y ##################################### # Drivers and peripherals CONFIG_I2C=y #CONFIG_I2C=n CONFIG_WATCHDOG=n CONFIG_GPIO=y #CONFIG_GPIO=n CONFIG_PINMUX=n CONFIG_SPI=n #CONFIG_SERIAL=n ##################################### # Power management CONFIG_PM=n ##################################### # Interrupts CONFIG_DYNAMIC_INTERRUPTS=n CONFIG_IRQ_OFFLOAD=n ##################################### # Memory protection CONFIG_THREAD_STACK_INFO=n CONFIG_THREAD_CUSTOM_DATA=n CONFIG_FPU=n ##################################### # Boot CONFIG_BOOT_BANNER=n CONFIG_BOOT_DELAY=0 ##################################### # Console #CONFIG_CONSOLE=n #CONFIG_UART_CONSOLE=n CONFIG_STDOUT_CONSOLE=n #CONFIG_PRINTK=n CONFIG_EARLY_CONSOLE=n ##################################### # Build CONFIG_SIZE_OPTIMIZATIONS=y ##################################### # ARM CONFIG_ARM_MPU=n # END Configurations from basic/minimal ########################################################################## # In order to correctly tune the stack sizes for the threads the following # Configurations can enabled to print the current use: CONFIG_THREAD_NAME=y CONFIG_THREAD_ANALYZER=y CONFIG_THREAD_ANALYZER_AUTO=y CONFIG_THREAD_ANALYZER_RUN_UNLOCKED=y CONFIG_THREAD_ANALYZER_USE_PRINTK=y CONFIG_CONSOLE=y CONFIG_UART_CONSOLE=y CONFIG_SERIAL=y CONFIG_PRINTK=y CONFIG_BT_DEBUG_HCI_CORE=y # Example output of thread analyzer # SDC RX : unused 816 usage 208 / 1024 (20 %) # BT RX : unused 1784 usage 416 / 2200 (18 %) # BT TX : unused 992 usage 544 / 1536 (35 %) # thread_analyzer : unused 136 usage 376 / 512 (73 %) # sysworkq : unused 1824 usage 224 / 2048 (10 %) # MPSL signal : unused 520 usage 504 / 1024 (49 %) # idle 00 : unused 192 usage 64 / 256 (25 %) # main : unused 136 usage 888 / 1024 (86 %) # Configurations set based on thread analyzer output. CONFIG_SDC_RX_STACK_SIZE=324 CONFIG_BT_RX_STACK_SIZE=1024 CONFIG_BT_HCI_TX_STACK_SIZE_WITH_PROMPT=y CONFIG_BT_HCI_TX_STACK_SIZE=640 CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=256 CONFIG_MPSL_SIGNAL_STACK_SIZE=640 CONFIG_MAIN_STACK_SIZE=1024 CONFIG_IDLE_STACK_SIZE=128 CONFIG_ISR_STACK_SIZE=1024 # Disable features not needed CONFIG_TIMESLICING=n CONFIG_MINIMAL_LIBC_MALLOC=n CONFIG_LOG=y CONFIG_ASSERT=n # Disable Bluetooth features not needed CONFIG_BT_DEBUG_NONE=n CONFIG_BT_ASSERT=n CONFIG_BT_DATA_LEN_UPDATE=n CONFIG_BT_PHY_UPDATE=n CONFIG_BT_GATT_CACHING=n CONFIG_BT_GATT_SERVICE_CHANGED=n CONFIG_BT_GAP_PERIPHERAL_PREF_PARAMS=n CONFIG_BT_SETTINGS_CCC_LAZY_LOADING=y CONFIG_BT_HCI_VS_EXT=n # Disable Bluetooth controller features not needed CONFIG_BT_CTLR_PRIVACY=n CONFIG_BT_CTLR_PHY_2M=n # Reduce Bluetooth buffers CONFIG_BT_BUF_EVT_DISCARDABLE_COUNT=1 CONFIG_BT_BUF_EVT_DISCARDABLE_SIZE=43 CONFIG_BT_BUF_EVT_RX_COUNT=2 CONFIG_BT_CONN_TX_MAX=2 CONFIG_BT_L2CAP_TX_BUF_COUNT=2 CONFIG_BT_CTLR_RX_BUFFERS=1 CONFIG_BT_BUF_ACL_TX_COUNT=3 CONFIG_BT_BUF_ACL_TX_SIZE=27
After enabling it and runing cmake i still get the error, what have i done wrong ?
attached the project *im modifying the peripherals_lbs, is there potentially a cleaner bt example ie bt blinky ?
Q2:
Regarding the callbacks functions like app_button_cb and app_led_cb that are called as functions in read_button and write_led.
is it just out of clean code and seperation of logic that it's organised to appear as callbacks in main ? just curious to as why it's organised to appear as a callback when it's just a function apart of the ble callbacks.
