Activate Dashboard Cards with AT Commands

Question

I am trying to use the DK Dashboard with the Serial LTE Modem Software. 
 The connection to the Cloud works in principle but I only can see the terminal card when connected. 
 Is it possible activate the other cards (e.g. GPS, TEMP) with an AT command (e.g. Subscribe/Publish or other)? 
 As I know there is no possibility to add own cards, but are there some "hidden" ones that can be activated? 
 Regards, 
 Bernd

justin · Accepted Answer

As Charlie mentioned, the cards are enabled by modifying the "ui" array in the device's shadow. See nrf_cloud_service_info_json_encode () and nrf_cloud_shadow_device_status_update (). 
 I do not believe that the SLM application directly supports this. It does have the option to enable the GPS card, which is done here . You could update the service info string to include the cards you wish to display, e.g.: 
 
 "{\"state\":{\"reported\":{\"device\": {\"serviceInfo\":{\"ui\":[\"GPS\", \"TEMP\",\"HUMID\",\"RSRP\" ]}}}}}" 
 
 Also, it looks like for that to be called you need to specify a 1 for the signify parameter when connecting: 
 # XNRFCLOUD =1,1